Crown Equipment Corp.    New Bremen, OH 45869
Feb 09, 2011 Equipped with forks that travel upward at 153 fpm, Crown RM 6000 Series can reach 505 in. and deliver up to 4,500 lb capacity at height. Pantograph reach truck, suited for high-density warehouses and distribution centers, is built for visibility at height, eye, and ground levels with offset MonoLift(TM) mast, reach carriage with large window, and load backrest with notch in upper right hand corner. AC motors, regenerative brakes and lowering system, and electronic steering are standard.

AGI - American Grippers Inc.    Trumbull, CT 06611
Feb 08, 2011 Equipped with S-7 tool steel jaws that ride on Armoloy TDC shafts, AGP Series features guided wedge design that offers optimal jaw centering, suitable for use in tight spaces with short strokes. Pneumatically actuated, double acting grippers are available in 2 bore sizes of .75 and 1 in. and 2 stroke sizes up to ¼ in., yet total height of assembly is 1.47 in. Optional switch kits allow use of inductive proximity switches for interfacing to electrical controls.

Akro-Mils, A Myers Industries Co.    Akron, OH 44301
Feb 08, 2011 Molded of high-density polypropylene block copolymer, Super-Size AkroBins are unaffected by weak acids or alkalis. One-piece construction is also water-, rust-, and corrosion-proof. Units feature handle molded into back, large front face area that can accommodate most label sizes, and reinforced side ribs that add strength and prevent bowing when stacked or filled to capacity. Available in 12 sizes, bins are autoclavable up to 250°F and come in red, yellow, or blue.

NuAire, Inc.    Plymouth, MN 55447
Feb 08, 2011 Suited for clinical laboratories and life science facilities, CellGard Energy Saver Models NU-475 and NU-477 minimize noise and vibration, cut energy consumption, and extend HEPA filter life. Class II, Type A2 units feature rocker-switch and touch-membrane control panels as well as HEPEX Zero-Leak airflow system, which optimizes lab safety by surrounding cabinets' plenum with negative air pressure.

Sapientech    North Little Rock, AL 72118
Feb 08, 2011 Using double reinforced scissor arm and forging assembly that attaches to chain singularly, Avenger Vertical Carousel avoids critical cascading failures which can destroy multiple carriers with one incident. If there is any pressure or stress, it is not passed through to other arms. Designed to minimize power consumption, carousel is suited for use in sustainability programs of green-conscious Custom Field 6 organizations.

Sapient Automation    Doylestown, PA 18901
Feb 08, 2011 Avenger(TM) uses double reinforced scissor arms and forging assembly that attaches to chain singularly to avoid critical cascading failures that would otherwise destroy multiple carriers with one incident. If there is any pressure or stress, it is not passed through to other arms. Component integration lends to energy consumption rates that allows green conscious Custom Field 6 organizations to utilize Avenger in sustainability programs.

Keystone Electronics Corp.    Astoria, NY 11105
Feb 08, 2011 Designed to retain cells securely under shock and vibration, Vertical Entry Lithium Coin Cell Holders feature flame retardant housings UL rated 94V-0 and dual-spring contacts, which are made of spring steel with tin plating. Polarized for circuit protection, holders will accept all major manufacturers' batteries. Sizes are available for 16, 20, and 24 mm diameter coin cell batteries. Coin cell holders are targeted for use with portable electronic devices.

FOX IV Technologies, Inc.    Export, PA 15632
Feb 04, 2011 Designed for 24/7 operation in demanding environments, Model 5422 utilizes Uniwall design that mounts Zebra 220 Xi4 printer components to industrial centerwall. System provides print speeds to 10 ips, print widths from 4.0-8.5 in., label lengths to 14 in., and print resolutions of 203 or 300 dpi. Equipped with RS232/422 and Ethernet communication interfaces, Model 5422 supports direct thermal and thermal transfer printing technologies, as well as linear and 2-D barcodes.

Central Air Compressor Co.    Warren, MI 48092
Feb 04, 2011 Factory assembled and fully accessible from all sides, Compair Air Station comes in fixed speed packages from 10-30 hp and variable speed package at 30 hp. Unit is equipped with TEFC motor, tank-mounted air compressor, and optional air dryer with 3-way bypass. Rated from 75-190 psig, station also includes integrated Grade B filter/separator, automatic zero-loss float drain, and fully enclosed forklift slots.

Anver Corp. - Anver.Com    Hudson, MA 01749
Feb 03, 2011 Featuring NBR rubber bonded onto machined aluminum hub, Rectangular Vacuum Cups include internal safety seal for sure grip. Units are rated up to 550 lb horizontal each and are suited for lifting I-beams, girders, reinforced boards, and architectural panels. Available in 5 sizes from 4-7 in. wide x 11-20 in. long, each vacuum cup includes pre-drilled and tapped mounting holes and vacuum port.

RNR Plastics, Inc.    Raynham, MA 02767
Feb 03, 2011 Made of 30-gauge clear vinyl, Fleet VisorWallet(TM) opens on short side and features 1 in. wide adjustable elastic strap that keeps it securely attached to visor. Unit is designed to be visible from front of visor or hidden on back, and can be custom printed with driver instructions or fleet service information. Credit card holder is suited for car rental companies, airports, utility fleets, law enforcement, taxis, limousines, and trucking companies.

Air Technical Industries    Mentor, OH 44060
Feb 02, 2011 Suited for indoor use where heavy components need to be lifted, transported, positioned, installed, and assembled, Model RBC-50000SPBW can lift up to 50,000 lb up to 240 in. high. Self-propelled reversible boom crane features infinitely variable speed controls, power steering, and automatic braking system built into drive wheel motors. Offering travel speeds from 0-3 mph, crane travels on 10 polyurethane wheels to spread floor loading and to protect floor.

Remstar International, Inc.    Westbrook, ME 04092
Feb 02, 2011 Ranging in height from 13-26 ft and adjustable in 1.6 ft increments, Element® Vertical Lift Module offers combination of vertically arranged storage trays that are delivered using extractor platform to operator at ergonomic access opening. Using CubeStar® technology, when tray is stored, Element VLM scans height of items on tray and stores tray in least amount of space required. Facilities can change height of stored product, up to 18 in. max, at any time without reconfiguring unit.

Air Squared, Inc.    Broomfield, CO 80020
Feb 01, 2011 Measuring 2 in. dia x 2.75 in. long, oil-free scroll compressor delivers 48% efficiency with up to 5 Lpm flow at 7 psig discharge pressure. Vibration-free, orbiting scroll design eliminates need for dynamic seal and features operating element made up of 2 identical involutes that form right- and left-hand components. Running in reverse, scalable scroll compressor becomes expander or air motor. Functionality meets requirements of lightweight, battery-powered, low-noise systems.

Novellus Systems, Inc.    San Jose, CA 95134
Jan 31, 2011 Intended for memory manufacturers, VECTOR® Extreme(TM) TEOS xT(TM) plasma enhanced chemical vapor deposition (PECVD) system delivers production throughput in excess of 300 wafers per hour using DPC(TM) hardware for deposition rate optimization, RapidClean(TM) for accelerated chamber cleans, and xT(TM) wafer handler for precision wafer placement. With fewer than 10 particle adders per wafer for defect sizes greater than 70 nm, nanoscale defect levels exceed requirements for 24 nm memory devices.

Vision Wheel    Decatur, AL 35603
Jan 28, 2011 Available in chrome, machined clear coat, and silver steel, series of 19.5 in. heavy-duty wheels reduce cost of operating 1-ton pickups by increasing load and ride stability, safety, and tread wear. True 19.5 truck tire option decreases tire operating costs during 100,000 mile life of tire size upgrade without any need to recalibrate speedometer. Other features include direct bolt application, hub rings for dualie applications, and standard duplex conical seat lug nut application.

QBC - Quality Bearings    Garden City Park, NY 11040
Jan 28, 2011 Made of 52100 chrome steel, integral studded standard guide wheels of BGXCOMMSW Series feature nylon retainers and are offered in concentric and eccentric stud types. Rails for these guide wheels are also available. Products, designed for optimal material cleanliness, surface finish, and straightness, deliver maximum performance, life, and safety. Minimal maintenance is required.

AutomationDirect.com    Cumming, GA 30040-9905
Jan 28, 2011 NITRA(TM) C-series features round, type 304 stainless steel bodies with anodized aluminum alloy heads. While standard features include type 303 stainless piston rod equipped with Buna N O-ring rod seals and sintered bronze rod bushings, options include clevis brackets and rod eyes. Double-acting cylinders are available in 9/16-3 in. bore sizes and stroke lengths from 0.25-4 in.

Igus, Inc.    East Providence, RI 02914 0349
Jan 28, 2011 Guidelok Slimline is designed for vertical cable carrier applications operating on storage-and-retrieval units in high-bay warehouses, elevators, and material-handling equipment. Compact unit travels freely between small sections of steel trough, and features 2 control buttons which are pushed back as radius of cable carrier passes between them. Buttons then move back into position where they hold hanging cable length in place, for low-noise smooth motion.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 27, 2011 To accommodate any application, metric size Retaining Magnet Assemblies are offered as flat and rod gripper, button, and U-Magnet types with steel, stainless steel, and brass material options. Magnets come in 4 materials, and assemblies are available in various sizes, threads, and finishes. Due to structure, each magnet assembly type has one magnetic pulling force level. Spatial effect of magnetic field is limited by shielded systems, preventing surrounding objects from being magnetized.