Coleman Equipment, Inc.    Irvington, NJ 07111
Jun 02, 2004 VacUp Lifting Device utilizes flow from vacuum blower to grip and lift load. Lifting ability is produced by capturing vacuum inside lift hose. Varying vacuum level with raise/lower handle enables load to be moved through 6 ft of lift.

Huot Mfg. Co.    St. Paul, MN 55104-1701
Jun 02, 2004 Steel, lockable Master Drill Storage Cabinet holds complete sets of jobber or screw machine length drills in addition to fractional, wire, and letter drills. It comes with 3 drawers with 159 pre-labeled compartments to ID each type of drill. Additional fourth drawer is undivided to accommodate extra long tools. Measuring 26 x 12 x 12.5 in., cabinet utilizes smooth rolling, ball-bearing slides. Drawers pull to full extension.

FisherCast Global Corporation    Peterborough K9J 6Y9  Canada
Jun 01, 2004 Suited for difficult-to-clamp components, FIXTURBLOK® uses metal alloy as fixturing medium to encapsulate components, distributing pressure points across surface. Fixturing metals used to form retaining block solidify at temperatures from 140–720ºF. After machining, component is released from fixturing medium by mechanical operation or melt-off process. Unit accommodates components measuring 1 x 1 x 2 in. to those over 2 ft in diameter.

ASG, Div. of Jergens, Inc.    Cleveland, OH 44110
Jun 01, 2004 By employing two 2 mm diameter round belts, Series CSR20 moves small parts such as thin, card-shaped items which can't be carried stably by flat belt conveyors. Standard belt lengths between pulleys range from 132–500 mm, and belt widths range from 10–200 mm. All conveyors include ac/dc, fixed, or variable speed motors and drives. Custom lengths and speeds are available.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Jun 01, 2004 Multi-process Power Wave® 355M power source, with Power Feedâ„¢ 10M wire feeder, features push-pull aluminum MIG capabilities. It is also capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging. Unit features ArcLink® open digital communications protocol and is rated 350 A, 34 V @ 60% duty cycle. Full amperage range is 5–425 A. Unit comes factory programmed with 60+ Waveform Control Technologyâ„¢ welding programs.

Trico Mfg. Corp.    Pewaukee, WI 53072 3954
May 28, 2004 Streamliner V applies precise flow of grease to critical machine parts. It comes pre-filled in 250 cc reservoir and has variable feed rates of 1, 2, 3, 6, and 12 months with auto purge cut-out. Unit contains electro-chemical drive that produces inert gas, nitrogen, for operation. Unit can be deactivated and adjusted as necessary.

Liquid Control Corp.    North Canton, OH 44720
May 28, 2004 Equipped with touch screen interface, Posiratio® Mini Advanced model allows operators to calibrate, adjust, and monitor all dispensing functions. Features include process data and maintenance screens, programmable shot size selector, and adjustable ratio pumping mechanism. Unit also incorporates pneumatically actuated Twinmixer® with adjustable snuff-back, disposable Posimixer® motionless mixers, and Posiload® positive displacement piston pumps.

Intech Corp.    Closter, NJ 07624 1333
May 26, 2004 Self-Lubricating Power-Core curved, U- and V-shaped rollers will not wear out rail, and achieve noise reduction of 6–10 dBa over metal rollers. Precision machining provides minimal run-out, while tire material absorbs shock to provide smooth rolling motion and is resistant to chemicals and corrosion. Power-Core rollers operate in temperatures ranging from -60 to +140°F and are suitable for indoor and outdoor use.

Pactiv Corp.    Lake Forest, IL 60045
May 26, 2004 Pactiv 9000 Air-Paq® inflates through single intake valve that allows air to travel from one independent chamber to another through one-way check valves. If one section is punctured, others remain inflated and provide protection for enclosed product. Envelope shape suits pharmaceuticals and individual assembly components. Box shape protects consumer electronics such as DVD players, PDAs, and cell phones. Wraparound structure suits large appliances such as refrigerators.

TISCOR    Poway, CA 92064
May 26, 2004 Asset Track, part of Track Pak product line, comprises software, hand-held computer, and bar codes, allowing users to track receiving, storing, and transferring of assets. System provides information on status of assets as well as location of each asset, eliminating manual paper tracking processes. Label module prints bar coded labels that can be attached to items, and report module allows users to document movement of items over specified time periods.

Walls & Forms Inc.    Dallas, TX 75374
May 26, 2004 Concept(TM) 2001 system facilitates organization of mechanical and electronic workstations, tool cribs, laboratories, and production lines. Modular panels, shelves, and accessories can be arranged for any job, putting tool and parts storage within reach of workers. Vertical storage unit is available with interchangeable shelves, hooks, brackets, and bins. Panels feature 100% plastic construction and will not chip, break, warp, rust, or absorb dirt and grease.

Philadelphia Mixing Solutions    Palmyra, PA 17078 9518
May 26, 2004 Mixer Caddy(TM) offers safe, portable batch mixing of tanks or totes. It meets most container specs and handles portable mixers from ¼-5 hp, eliminating need for dedicated mixers at each tank or tote. Made from welded steel tube, unit has onboard hand-crank winch capable of lifting up to 500 lb, and locking pins to ensure proper mixer alignment and position. Orange safety paint and safety end caps ensure high visibility and operator safety.

ERICO    Solon, OH 44139-2631
May 25, 2004 Suited for iron pipe or copper tubing, CADDY® MICROFIX features hinged design that eliminates need to disassemble clamp prior to installation. Setscrew catches in locking plate, so no tools are required to position pipe in clamp. Final tightening can be completed with one hand or screwdriver, depending on pipe size. Integrated rubber gasket minimizes vibration and rattling and eliminates clamp-to-pipe contact.

Hamilton Caster & Mfg. Co., The    Hamilton, OH 45011 4087
May 21, 2004 Featuring heavy-duty construction, Series 7100 is available with 4 x 5 in. top plate with zinc-plating finish that prevents rust and wear. Swivel construction features drop-forged steel top plate and horn base, legs made of ¼ in. plate steel, and ¾ in. dia integrally forged steel kingpin. Assuring smooth swiveling, product incorporates 2 machined swivel bearing surfaces to counteract radial thrust and is available with wheel sizes from 8–25 in.

Del-Tron Precision Inc.    Bethel, CT 06801
May 21, 2004 With straight-line, adaptable slide design, C-.5 linear ball slide assembly can be installed with 2 fasteners. Product has aluminum base and carriage containing 2 rows of precision ball bearings, separated by engineering plastic retainer rolling between 4 hardened and ground steel shafts on each side. It offers travel of 0.33 in. while providing 0.75 lb load capacity. Row of staggered set screws allows preload to be set and adjusted.

Rose Plastic USA, L.P.    California, PA 15419 0698
May 20, 2004 Stackable with locating tabs, plastic RoseCase secures and protects organized products during transport with internal machine or die cut foam or thermo formed trays. Reusable case, available in various color combinations, features secure locking mechanism, hinges, and functional handle that collapses to minimize space requirements. Product is offered in 3 sizes with varying volume capacities. Cover can be silk-screened for product/company identification.

Dehnco Inc.    Barrington, IL 60010
May 20, 2004 Foot-pedal operated feeder dispenses Kraft paper, foam, bubble pack, Kimpac, and newsprint at speed of 10 in. per second with accuracy of ±¼ in. Built-in tear bars facilitate manual removal of material, and optional cutting system also available for improved ergonomics. Surface unwind system allows quick loading of new rolls of material without need for roll bars and core chucks. Feeder suited for wrapping and void fill applications.

MK Automation Engineering Inc.    Bloomfield, CT 06002
May 20, 2004 MOdel ZRF-P 2040.02 Timing Belt Conveyor System performs product staging and indexing, where same or similar parts must be positioned for automatic loading of assembly components. Single timing belts widths range from 40–400 mm, while lengths range from 650–6,000 mm. Available with load ranges from ounces to 500 lb, conveyors utilize DC, AC, Stepper, and servo style motors with speed controls from DC variable to servo drives.

Revvo Caster Co., Inc., The    West Seneca, NY 14224
May 20, 2004 TwinTech Solus casters, offered in 5 swivel and 5 total-lock swivel models, are constructed of die-cast aluminum and swivel freely in all directions. Low-height and low-offset designs maximize stacking capacity and provide stability. With twin-wheel design, casters handle loads from 198–297 lb. Models with wheel diameters of 3, 4, and 5 in. have respective heights of 90, 120, and 148 mm. Total lock models feature enclosed brake mechanism activated by thermoplastic pedal.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
May 19, 2004 Lift and Sealâ„¢ Hydraulic Container Dumper accepts then rotates containers 150°, discharging contents into surge hopper. Surge hopper includes bolted top cover with inlet valve and male quick coupling to discharge material into existing pneumatic conveying system. System features stainless steel product contact surfaces and metal safety caging. It hydraulically seals containers to pour hood with discharge valve, eliminating product contamination/spillage.