PCB Piezotronics Inc.    Depew, NY 14043 2495
Sep 24, 2004 Model 379A01 test stand can be rotated radially and front-to-back, and can accommodate flexible pattern arrangements, e.g., 1 x 16, 2 x 8, and 4 x 4. Fixed microphone spacing of 3.15 in. is available in multiples of 1.57 in.

Gluefast Co., Inc.    Neptune, NJ 07753
Sep 24, 2004 SOLO GLUE RITER features ball-and-spring valve with flat face that allows uniform ½ in. film of adhesive to be applied. Product, supplied in 10 oz bottle, is suited for use in applying adhesive for matboard mounting, tipping and tabbing, case sealing, and spot gluing. Water-based food packaging adhesive, MATHESIVE 101, is also included.

IEMCA    Charlotte, NC 28273
Sep 24, 2004 Master 880 is compatible with all fixed headstock lathes, and feeds round, square, and hex-shaped bars with minimal noise and no vibration. Precise bar feeding and positioning are controlled by CNC with integrated PLC. Machine can be configured with one of 3 large-capacity magazines that can be located on either side. Bar changeover is 35 sec for 12 ft bars. Patented 2-stage Double Pusher feeding system reduces overall bar-feeder length to under 16 ft.

IEMCA    Charlotte, NC 28273
Sep 24, 2004 Mini BOSS 322 is compatible with Swiss-type and fixed headstock CNC lathes. It feeds 12 ft bar stock in diameter range from 3-32 mm. Magazine capacity is twenty-six 10 mm dia bars. Quick-change elastic guide channel permits rotation of round, square, and hex-shaped bars with minimal noise and vibration. Setup time between bars of different diameter, without guide channel changes, is less than 10 min. Maximum adjustable feeding speed is 750 mm/sec.

Henkel Consumer Adhesives, Inc.    Avon, OH 44011-1355
Sep 24, 2004 Used in painting preparation, Duck brand Turbo Maskerâ„¢ allows for accurate application of painting tapes in order to protect trim, walls, windows, and baseboards. Operation requires user to attach and hold one end of tape to surface being masked, pull back on unit, and roll out tape. Dispenser lays down tape cleanly and precisely, keeping tape ready for use. Product is available with 30 or 60 yd roll of Duck® brand 14-Day Clean Releaseâ„¢ painter’s tape.

Toyoda Machinery USA Inc.    Arlington Heights, IL 60004
Sep 23, 2004 Horizontal Machining Center, Model FA450-III can be paired with high-speed rail guided vehicle and pallet storage system to form complete metal-cutting cell. Three-level stocker system allows unmanned machine loading and lights-out production. Due to modular design and virtually unlimited capacity, additional machines, loading stations, and up to 120 pallets can be added without interrupting production.

SoftPack International    Commack, NY 11725
Sep 23, 2004 C-Clip Applicator applies ¾ in. wide C-Clip of clear, pre-printed, polypropylene tape to blister pack folders, one-piece folders, CD mailers, and magazines up to 9/16 in. thick. C-shaped tape measuring approximately 1.5 in. is applied to top, front, and bottom. Applicator is portable and requires only air to operate.

Linde Lift Truck Corp.    Summerville, SC 29483-9621
Sep 23, 2004 Series 336, comprising both pneumatic and cushion-tire models, provides power equal to Class IV and V internal combustion trucks for indoor and outdoor use. Encompassing four 80 V models with capacities from 5,000-6,000 lb, Models E25 through E30/600 provide travel speeds of 9 mph loaded and 10 mph empty. Digital control manages 2 shunt-wound drive motors incorporating separately excited motor technology. Combi-Axle enables truck to turn in its own radius.

Videojet Technologies, Inc.    Wood Dale, IL 60191-1073
Sep 23, 2004 Videojet Broadcast Systemâ„¢ encodes and applies RFID tags utilizing label applicator, RFID reader, and reject identification and recovery system, which catches bad tags before they make it to product and into supply chain. System supports Class 0 or Class 1 tags, and is EPC Global Standard upgradable.

IEMCA    Charlotte, NC 28273
Sep 23, 2004 PRA series of loaders for multi-spindle lathes retrofit to any lathe with 5, 6, or 8 spindles currently utilizing stock reels. Model PRA-52 feeds bars from 5-52 mm in diameter. Four-tier rack version accepts 70.92 linear inches of stock, and bundle version holds 2.5 tons of stock. PRA-100 bundle version feeds bars up to 3.937 in. Products offer clutch controlled mechanically actuated feed system, and accurate bar loading positioning is insured by use of encoder.

AMSOIL, Inc.    Superior, WI 54880
Sep 23, 2004 AMS-Oiler recharges engine's bearing with 160 cc of lubricant in first 2 minutes of engine startup. During winter, it saves fuel and wear and tear on engine's first five minutes. Oiler eliminates need to run engine during a lunch break or over night. Self-contained system is constructed of anodized aluminum and carbon steel. Life cycle exceeds one million starts.

Orion Fittings, Inc.    Kansas City, KS 66117
Sep 22, 2004 Rotationally-molded from polypropylene, Neutralization Tank receives, dilutes, and neutralizes corrosive and harmful chemical wastes such as those produced in manufacturing processes. Clean-out cap is located on top of tank, facilitating routine maintenance. Tank features uniform wall thickness and is available in blue-colored resin, which makes it visible in under-counter applications.

Spiroflow Systems, Inc.    Monroe, NC 28110
Sep 22, 2004 Gaylord Box Filler facilitates container filling operations, minimizing operator fatigue. It features custom inlet tube, venturi bag inflation system, gain-in-weight load cells, vibration for product compaction, and inflatable bag spout seal. Discharge of inlet tube accepts quick-connect flexible spout for Gaylord filling.

Advance Lifts, Inc.    St. Charles, IL 60174
Sep 22, 2004 Utilizing 5 hp motor, 90° Upender positions loads for assembly and palletizing operations. Platform sizes range from 48 x 54 in. to 60 x 72 in. with capacities from 2,000–10,000 lb. Steel coils and paper rolls can be put on unit with core parallel to ground. Upender then rotates 90° onto pallet with core perpendicular to ground, permitting safe transportation of coil or roll. System includes built-in power unit and chrome-plated axles, shafts, and cylinder rods.

IEMCA    Charlotte, NC 28273
Sep 22, 2004 Genius Series is equipped with CNC control system that provides all necessary parameters to configure bar feeding and bar changing operations. With 8.5 in. magazine capacity, product can hold 220 1 mm x 12 ft bars. Machine incorporates double pusher system, telescopic nose, and headstock synchronization device. Other features include cast iron guide channel and hand-held digital push-button pendant that permits remote programming.

IEMCA    Charlotte, NC 28273
Sep 22, 2004 CNC BOSS 332 and 551 Evolutions are 12 ft hydrodynamic bar feeders with bar capacity of 3-51 mm and magazine capacity for 28, 10 mm dia bars. They incorporate quick-change elastic guide channel, self-adjusting bar gripper device, and quick change front guide. Double pusher system and automated, oil-lubricated Vulkollan front guide bushing are also included. All operations are monitored in detail, and hand-held pendant allows for remote programming.

IEMCA    Charlotte, NC 28273
Sep 22, 2004 Equipped with mono-plane staging rack, single-spindle Master 880MP utilizes quick-change hydrodynamic guide channel system, double pusher configuration, and CNC control. Product can run various bar diameters in one channel set. Axial movement of guide channel allows for clearance behind lathe spindle, while closed-loop re-circulating oil system reduces vibration. Front guide bushing device is equipped with Vulkollan bushing, and hand-held pendant allows for remote programming.

IEMCA    Charlotte, NC 28273
Sep 22, 2004 Models SIR 32 and 25 replace traditional guiding and bar feeding systems. Bar capacities range from 5-32 mm with SIR 32, and 4-25 mm on SIR 25. Bundle bar magazine configuration handles 3500 lb stock. Rack version has 19-step chain bar handling system featuring inclined plane for chain feeding another 200 mm of bar diameter. Magazine capacity is twenty five 32 mm bars or sixty 5 mm bars. Patented double pusher system extracts remnant end and reduces overall length of bar feeder.

IEMCA    Charlotte, NC 28273
Sep 22, 2004 Equipped with 300 mm, sloping plane, multi-bar magazine, TAL 65 feeds bars from 5-65 mm at 250-500 mm/sec. Dual bar support principle uses hydraulic immersion and dynamic support in elastic guide channel to provide high-speed feeding, even when bars are slightly bent. Closed-loop re-circulating oil system feeds oil into elastic guide channels, eliminating bar vibration. Mechanical traction-designed system with hydraulic clutch allows total adjustment of force.

IEMCA    Charlotte, NC 28273
Sep 22, 2004 Model TS 560 Rack comes with 3-4 superimposed moveable rack magazine with capacity of seventy 25 mm diameter bars, while Model TS 560 Bundle magazine offers 2.5 ton capacity. Change time is 25-30 sec for 12 ft bars. Feeders can be connected to automatic and CNC lathes, either fixed or sliding headstock, and with any type of bar-working machine. Guide channels made of wear-resistant spring steel and elastic polymer provide virtually vibration-free operation.