RADIALL Inc    STRATFORD, CT 06615
May 05, 2004 USCAR Plugs and Jacks offer cable retention force up to 110 N for standard 5/50 cable RG58 and 2.6/50 cable RG316. They are usable up to 6 GHz and optimized for frequency range of 0–4 GHz. Units support all RF applications found in cars such as radio and TV broadcast, GSM, and GPS. They withstand temperature range of -40 to +110°C, and are available with all types of coaxial connectors, from microminiature UMP to standard SMA.

Igus, Inc.    East Providence, RI 02914 0349
May 05, 2004 AUTO-GLIDE System is equipped with positioning guide and floor bumpers to keep Energy Chain® in line and prevent top of chain from derailing. Ribs along inner radius of carrier interlock to create channels for carrier to glide along. With AUTO-GLIDE, Energy Chains can achieve speeds up to 16 fps and maintain travel lengths up to 328 ft without guide trough. System is suited for long-travel applications such as conveyor systems and assembly equipment.

DeVilbiss Industrial Spray Equipment, ITW Industrial Finishing    Glendale Heights, IL 60139
May 05, 2004 Model EXLâ„¢ HVLP Spray Gun offers large spray pattern that facilitates fast coverage. Even distribution of materials eliminates mottling or striping, and 3 feed types enable optimum atomization for basecoats, clearcoats, and single stages. Unit features stainless steel fluid tip, needle, and fluid inlet adapter with anodized fluid passages. For ease of maintenance, sprayer has interchangeable air caps, fluid tips and needles.

FKI Logistex North America    St. Louis, MO 63132
May 04, 2004 Accupass(TM) pick-and-pass conveyor operates at rates up to 30 packages/min with weight capacities up to 75 lb. Utilizing modular wiring and control scheme that allows end user to select type of network used to control it, Accupass integrates with PLCs or high-level control systems normally employed in typical distribution centers. Pre-engineered, modular conveyor runs on-demand and requires no compressed air or high-voltage drops.

Lincoln Electric Company, Inc., The    Cleveland, OH 44117
May 04, 2004 Semi-automatic Model LF-72 is available in base model, standard-duty bench, and heavy-duty bench model that can accept up to 60 lb spools. Feeder can accommodate .023–1/16 in. MIG wire diameters and .035–5/64 in. flux-cored wire diameters at feed speeds of 50–800 ipm. Two-roll, Universal Wire Drive System is made of die-cast aluminum for consistent wire feeding. Model LF-72 includes 400 A Magnum™ gun, 10 ft control cable, and .035/.045 in. drive rolls.

Strong Hold Products, Div. of Fabricated Metals LLC    Louisville, KY 40209-0043
May 03, 2004 Suited for storing valuable tools and equipment, 453UJB heavy-duty workbox employs 3-point lock system with use of padlock. Unit features 12-gauge steel; all welded construction; removable, 14-gauge shelves; concealed hinges; and lifting handles with hydraulic support. Other features include raised bottom to facilitate pickup with forklift and pre-punched holes for optional casters. Measuring 60 x 36 x 48 in., product has 800 lb shelf capacity and weighs 602 lb.

Humphrey Products    Kalamazoo, MI 49003
May 03, 2004 Cylinders incorporate reversible piston and internal design that provides smooth, no-drag movement and clean breakaway. V-seal design prevents seal collapse and blow-by, ensuring constant contact with cylinder barrel. Products feature stainless steel barrels and piston rods, oil permeated ball-sized rod bushings, roll-formed threads, and full, unrestricted porting. Available in single and double-acting models, bore sizes range from .50–2.50 in.

Handling Specialty Mfg. Ltd.    Grimbsy, ON L3M4G1  Canada
May 03, 2004 Offering 6,000 lb capacity, Dual Lift System features small lift on top for carrying and positioning gimble and large, mobile personnel lift on bottom for moving gimble from service area to reactor. When lift is in position for removing gimble, wheels lock allowing lower lift to rise into position. Second, smaller lift then rises to locate gimble in x-y plane for mounting to crane. Lower lift is hydraulic while upper lift is mechanical. Platform is 7 x 14 ft and expands to 9 x 14 ft.

JVI Vibratory Equipment    Houston, TX 77240-0564
May 03, 2004 Vibratory Feeder includes chutework and support system in one piece of compact equipment. Inlet bolts to hopper outlet flange, eliminating need for cable supports. Support system is built into framework of feeder and provides safe and stable operation. Integrated chutework options are available for both electromechanical and electromagnetic vibratory feeders.

Flexicon Corporation    Bethlehem, PA 18020 8006
May 01, 2004 Swing-Downâ„¢ bulk bag filler has pivot-down fill head that lets operator connect empty bags at floor level. Constructed of carbon steel, unit simultaneously lowers and pivots fill head to position that places bag inlet spout connection, inflator button, and 4 bag loop latches within arm's length of operator. Remote console houses controls to raise and pivot fill head, inflate bag, open flow control valve or start feed device, and stop flow of material.

Fisnar Inc.    Wayne, NJ 07470
May 01, 2004 Model PP300-A Clear-View Pressure Chamber dispenses cyanoacrylate directly from jar or bottle without having to transfer material from supplier's container. Users open lid of Pressure Chamber, place bottle inside, insert polyethylene tube into bottle, and secure chamber. Air pressure, fed through air regulator, pressurizes chamber. Material travels up tube to thru-chamber connector and out via tube to pinch tube valve or pinch tube hand-held pen.

POLYCASE    Avon, OH 44011
Apr 30, 2004 POLYCASE FB-40 Curvilinear Handheld Enclosure includes clear, silicone rubber LED light pipe and keypad with 1–5 different configurations of rubber buttons. Built-in key fob ring is flush with enclosure body. Snap-together closure provides screwless assembly. Enclosure measures 2.63 x 1.75, x 0.61 in.

Conveyor Technologies Ltd.    Milford, OH 45150
Apr 30, 2004 Stainless steel, wire mesh belt conveyor offers thermal resistance combined with 60% open flow area. All supporting surfaces are round and formed in single-piece lateral spiral. Belt affords both lateral and longitudinal flow of air or liquids. Odor and flavor absorption are eliminated because belt is virtually immune to chemical reaction. Available in widths from 2–12 in., conveyor is suited for cleanroom and food, pharmaceutical, and medical equipment applications.

RJ Enterprises    Oakland, CA 94611
Apr 30, 2004 FLAT RACK organizes tools and drywall type materials in back of work trucks. It installs in seconds and is adjustable to fit all pick-up truck bed widths, even with lumber racks and tool boxes in place. Unit allows lowering of tailgates for access to tools stored in truck bed.

Stafford Mfg. Corp.    Wilmington, MA 01887
Apr 29, 2004 Stafford Rail Clamps function as positive mechanical end stop or mounting block on rail-mounted shafts. Clamp-style devices slide over end of both shaft and support rail and separate to permit assembly anywhere on shaft. Machined from steel with black oxide finish, products are offered in 6 sizes from ½â€“1½ in. bore and adjust using hex wrench. They can include drilled and tapped holes for mounting components and can be made from stainless steel.

Tharo Systems Inc.    Brunswick, OH 44212 0798
Apr 29, 2004 Smart Label Printer/Applicator, Model PA1000tZ can print and apply up to 58 smart labels per minute. It uses Zebra® R4Mplusâ„¢ thermal transfer printer, which is EPC-compatible with UHF transponder support. Model R4Mplusâ„¢ not only encodes and verifies smart labels, but also prints text, graphics, and bar codes. Featuring large capacity unwind/rewind, Model PA1000t Tamp applicator can apply labels to top or side of products of varying height.

Anver Corp. - Anver.Com    Hudson, MA 01749 3214
Apr 29, 2004 Vertical Vacuum Lifter can be hung from crane or cherry picker to let one person pick up and manipulate bulky panels weighing up to 10,000 lb. Featuring dual dc battery packs and built-in charger, lifter operates for 10 hr work shift and can be reconfigured in field for handling different loads. Unit is available with beams up to 24 ft long, and fully adjustable cross-arms with multiple vacuum pads. Safety pendant control and vacuum gages validate proper operation.

Hodge Mfg. Co., Inc.    Reno, NV 89502
Apr 28, 2004 Made of polyethylene copolymer, Hook-On-Bins(TM) are available in 5 sizes to accommodate many types of small items. Each has back tab hook for hanging on louvered work cabinets, carts, and benches. Molded top edge permits secure stacking when hangers are not available, while molded side grips help user place and remove bins. Built-in front slot holds part identification cards or other bin labels. Lowered front edge allows visibility of parts.

Toyota Material Handling U.S.A., Inc.    Irvine, CA 92623-7419
Apr 28, 2004 Series 7 Electric Reach Trucks feature multifunction control handle and electronic power steering to provide maneuverability in confined work environments. SepExâ„¢ drive motor delivers precise speed and torque control. TACS control unit enables accurate truck positioning and placement while enabling unit to be customized for different work environments and operator skill levels. Trucks are suited for retail operations, general warehousing, and storage.

Elscint Automation    Pune 411026  India
Apr 28, 2004 Feeding, Orientation, and Elevating Pump feeds and orients taper rollers for taper roller bearings. It utilizes Model 250 or 400 vibratory bowl feeder to feed parts to set of powered gauge rolls. Inclination of rolls, plus adjustable roll spacing, enables parts to travel rapidly into desired position. Counter-rotating rolls will not bind or grip parts. Pump unit elevates rollers to desired height from where they can be gravity-fed to work station.