Anver Corp. - Anver.Com    Hudson, MA 01749
May 27, 2005 Molded from black Delrin®, Small Foam Seal Vacuum Pads feature interchangeable foam inserts that are offered in various softness grades to conform to rough plastic, fiberglass, or wood surfaces. Vacuum lifting suction pad assembly is designed for lifting steel and aluminum treadplate. Available in 3.78 in. dia. size with 35 lb load capacity at 22 in. Hg vacuum, pads come with double female NPT 1/8 in. or G 1/8 in. coupling.

Elscint Automation    Pune 411026  India
May 27, 2005 Sprayable ElscintPUL, used with stainless steel, mild steel, or cast aluminum bowls, can be formulated to provide smooth or rough texture. Smooth formulation reduces noise level by eliminating metal to metal contact, and rough formulation increases friction for oily components to reduce friction between components and bowl track. Offered in thicknesses from 0.40–2 mm and above, green polyurethane lining is US FDA approved.

Ortronics, Inc.    New London, CT 06320
May 27, 2005 Featuring steel knock-down design that can be assembled onsite, Mighty Mo 6 is compliant to Telcordia GR-63-CORE Zone 4 standards, with load rating of 510 lb. Unit is 7 ft high with 10.5 or 16.25 in. channel depth and full 45 rack units of mounting space. Suited for high-density cabling system applications, rack features vertical management cage with individual 1-rack unit fingers and double-hinged door that can open to left or right.

Rousseau Metal    St. Jean-Port-Joli, QC G0R 3G0  Canada
May 26, 2005 Computer Cabinet includes fan with filtration screen to minimize dust infiltration while cooling down cabinet. Back panel facilitates installation of system and access to computer's components. Offered in mobile or stationary models, cabinet is equipped with keyboard drawer that provides wrist support, and shock-resistant, demagnetized polycarbonate window that avoids image distortion. It can be personalized with fixed or roll-out shelves.

Speedline Technologies Inc.    Franklin, MA 02038
May 25, 2005 XyflexPro+ features advanced composite gantry design structure and linear drive system utilizing motion control drive technology. Platform, available as standalone or in-line system, offers flexibility to be configured for various dispense applications within electronics, automotive, and medical industries.

Parker Fluid Control Division    New Britain, CT 06051
May 24, 2005 Available fully assembled or as modular components, Car Care Solenoid Valves are offered with various pressure vessels and epoxy-encapsulated coils. Line includes 2-, 3-, and 4-way, NO and NC models with brass or stainless steel construction, variety of seal and disc materials, and orifice and port sizes from 1/8-2 in. Three- and 4-way models can be used to provide pneumatic cylinder control of brushes and tire scrubbing assemblies.

UFP Technologies, Inc.    Georgetown, MA 01833 2107
May 24, 2005 Reusable containers, available with or without foam dunnage, are suited for intra/inter-plant handling of component parts and sub-assemblies. With modular design, products can be collapsible and customized to suit specific distribution environment. Weather-resistant, waterproof containers withstand harsh conditions and can be cleaned of dirt or grease. Options include metal bar sonically welded to edges, and plastic rivets to snap box together.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
May 24, 2005 Micro-Meter® 2 Servo applies precision beads and metered shots of precisely mixed resins. Servomotor design provides consistent and repeatable bead profiles and variable flowrate metered shot volumes. Control can be preset to vary flow rate and change bead profile or fill rate during process, and can also accept commands from automation. Positive-displacement, 2-component system features Snuf-Bakâ„¢ or No-Drip® dispense valve and disposable No-Flushâ„¢ mixers.

LNS America Inc.    Cincinnati, OH 45245
May 24, 2005 Using oil-based, hydrostatic support system, Quick Six handles 18 in. to 6 ft long bar stock ranging from 5/16–3 1/8 in. diameter. Menu-driven remote control prompts users through setups, and program data is stored on smart media cards. Standard chain magazine holds 8 pieces of bar stock, and optional side load rack and bar elevator holds up to 50 6-ft bars.

ID Technology Corp.    Fort Worth, TX 76106
May 24, 2005 Model 250 linerless print apply system integrates cutter into print engine to cut material at specified length before label is dispensed onto tamp pad. Label length is specified using label creation software that also allows user to select cutter option. Print engine features coated rollers and label contact surfaces that ensure linerless material will not stick or jam inside printer. Direct thermal material is available.

Igus, Inc.    East Providence, RI 02914 0349
May 23, 2005 System E3 Energy Chain® all-polymer cable carriers are designed with pitch that enables smooth, quiet operation and minimal vibration. Comprised of link, spring connector strip, and opening zipper, system is available with 10, 15, and 22 mm inner heights. Zipper design facilitates closing of link on outer radius for cable access and installation. Applications include drawer slides, enclosures, and pick and place robots in various industries.

Sealed Air Corp.    Saddle Brook, NJ 07663-5291
May 20, 2005 Suited for shipping sensitive, small parcels, TuffGard Extremeâ„¢ products combine protection of 5/16 in. Bubble Wrap® cushioning with multi-layer, co-extruded film that is moisture-, puncture-, and tear-resistant. Mailers, available in 5 sizes from 7¼ x 12 in. to 14¼ x 20 in., feature fully laminated construction and tamper resistant, self-seal closure. Fine, textured surface can be printed with up to 8 colors.

ID Technology Corp.    Fort Worth, TX 76106
May 20, 2005 Model 250a can change from apply-only to variable print and apply labeling. Featuring standard label roll size of 12.5 in. OD x 3 in. ID, unit applies labels from 1–7 in. in top, bottom, side, and corner wrap configurations. Apply-Only Module offers high tack drive roller to prevent label slipping and ensure precise label dispensing at high speeds. It takes place of print engine and is affixed to base unit using standard bolt-on structure.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
May 20, 2005 Stainless steel 1-quart siphon feed cup and 3 pressure assist cups are designed to provide precise fluid pressure control with conventional spray guns. They incorporate air regulator, flare lip cup, and flattened bottom cup design. They also feature proprietary check valve and vent design as well as lid, yoke, and lever design. Interchangeable parts include stainless steel cups, lids, lid gaskets, fluid tube, and yokes.

Electrodyne Co., The    Batavia, OH 45103 9736
May 20, 2005 Offering total elongation up to 250%, Reanceâ„¢ SF neodymium iron boron magnet holds tight radiuses without cracking, breaking, or losing magnetic properties. Unit can be produced as thin as .012 in. making it suited for use in cordless power equipment, sensors, guitar pick ups, and xerographic equipment. Reance SF may be custom-formulated to particular magnetic requirements, as well as slit, drilled, die-cut, or punched to customer specifications.

SMC Corporation Of America    Indianapolis, IN 46226
May 19, 2005 Model ASR Pressure Valve consists of regulator with check valve and speed controller, while Model ASQ Flow Valve combines quick supply/exhaust valve and speed controller. Body and one-touch fitting allow 360° rotation. Fixed set pressure type and variable set pressure type are available. Both valves can cut air consumption by operating return stroke at minimized pressure, preventing jerky movement of working stroke and operation delay in return stroke.

Alemite LLC    Fort Mill, SC 29715
May 19, 2005 Made of die-cast aluminum, hose reel contains powder-coated aluminum and corrosion-resistant internal components. It is effective in high-moisture areas, including marine and paper mill applications. Stainless steel reel is suited for areas involving food handling, corrosive environments, metals processing, mines, and general manufacturing. Additional reels include hand-crank reel, electric cord reels, and standard-duty light reel for illuminating work areas.

Stafford Mfg. Corp.    Wilmington, MA 01887
May 18, 2005 Accu-Flange can be machined by user for applications as pulley, cam, or component mounting device, enabling designers to develop custom solution from standard product line. Featuring integral clamp that incorporates double-split design and relief groove, product retains perpendicularity and will not mar shafts. Adjustable unit, available in 6 bore sizes from ½â€“1½ in. ID, can be supplied in steel, stainless steel, and aluminum, with or without keyway.

Flexco    Downers Grove, IL 60515-4200
May 18, 2005 Developed for heavily loaded mainline and panel belts in underground and surface mining, Flexco® R9S fasteners are stamped from 0.135 in. thick 300 Series stainless steel and accommodate belt thickness from 5/8–1 in. Fasteners, part of SRâ„¢ Scalloped-Edgeâ„¢ rivet-hinged conveyor belt fastener system, feature 8-rivet attachment and suit belts with mechanical fastener ratings up to 2,000 PIW running on conveyors with end-pulley minimum diameters of 42 in.

MK Automation Engineering Inc.    Bloomfield, CT 06002
May 17, 2005 Flat Top conveyor, SBF-P 2254, is assembled using rolling and gliding (90° and 180°) curves, straights, inclines, declines, and transfer segments. Offered in 100 and 130 mm widths, product can be reconfigured to handle changing production and product handling needs. Conveyors are available with 3 chain materials, including Acetal glass reinforced polyester and FDA approved Kevlar® reinforced Delrin. Choice of motors and speed control are available.