Eagle MHC    Clayton, DE 19938
May 23, 2006 Snap-n-Slide(TM) system incorporates heavy-gauge stainless steel shelf that slides onto die-formed stainless steel mounting brackets. Shelves can be positioned anywhere on wall brackets, without need for fasteners or tools, while brackets can be mounted directly to wall studs, allowing shelf to be adjustable on brackets. With rolled front edge, shelves are 12 in. wide and are available in lengths ranging from 24-72 in.

QC Industries    Batavia, OH 45103
May 23, 2006 Available in 5 standard configurations of movement, 125Z Series conveyors fit within space constrained areas and provide tight product transfer. Z-Track(TM) component allows users to control belt tracking at fixed angles ranging from 30-90° of incline/decline and adjustment settings can be locked-in to ensure long belt life. Belt widths of 8-24 in. are available in lengths up to 20 ft, with load carrying capacity of up to 125 lb and speeds to 225 fpm.

Heinrich Co.    Racine, WI 53403
May 23, 2006 Offered in jaw widths of 2, 6, and 8 in., self-centering vises handle stock sizes from ¼-9 in. Maximum jaw opening can be adjusted via stops, and set of hardened and ground horizontal v-jaws is offered with each size. Operated with double-acting piston type air cylinders that produce from 15-33 times power factor, vises have recommended max air pressure of 120 psi. Gear and rack assembly in bottom of each unit moves jaws together with ±.0001 in. accuracy.

H2W Technologies, Inc.    Santa Clarita, CA 91350
May 22, 2006 With up to 2 in. of travel and no force or velocity ripple, voice coil stages suit precise motion control applications such as scanning, lens grinding, and laser and mirror positioning. Direct drive, zero backlash stages have no moving cables and are available with acceleration rates to 10 g, 0-50 lb continuous force, and 150 lb peak force. Closed loop products exhibit smooth motion and require linear servo amplifier.

Anver Corp. - Anver.Com    Hudson, MA 01749
May 22, 2006 Ring Vacuum Cups for Optical Storage Media include full range of single cup, bellows, half ring, and closed or full ring cups, molded from silicone. Units provide suction while protecting delicate coated surfaces of CDs, DVDs, BDs, and other optical storage media. Suited for pick-and-place robotic systems, vacuum cups are offered in variety of styles for use with EAM, Heino Illsman, Gima, and Kyoto automatic packaging machines.

Igus, Inc.    East Providence, RI 02914 0349
May 22, 2006 With ball-and-socket style design, Triflex® R Light 6-axis cable carrier moves multi-dimensionally on x, y, and z axes, and twists up to 380°/yd, enabling movement around complex configurations. Open style links provide constant viewing and inspection, while fan-like supports create 3 compartments for cables and hoses, enabling separation of electrical, fluid, and pneumatic cables. It offers uniform bend radius of less than 4½ in. in every direction and short pitch for tight installations.

Anver Corp. - Anver.Com    Hudson, MA 01749
May 22, 2006 Offered in electric or air-powered models, 4-Pad ET Series lets one person lift flat, non-porous loads and attach and release them in vertical or horizontal plane. Featuring fully adjustable cross beams and spring suspended vacuum cups, below-the-hook lifter/tilters are suited for gently handling window casements and architectural panels. They come in 200, 500, 1,000, and 2,000 lb capacities with various suction cup materials to match application.

SP3 Inc.    Mountain View, CA 94041
May 19, 2006 Hot filament Model 650 CVD Diamond Deposition System features fully integrated process control that allows unattended operation and external monitoring. It can be configured to produce finely tuned deposition processes in nano-crystalline or micro-crystalline structures from submicron to 50 micron plus in thickness. Model 650 addresses applications such as diamond on wafers in sizes up to 300 mm, wear coatings, substrates for thermal management, and electrodes for water treatment.

Vibra Screw, Inc.    Totowa, NJ 07511
May 19, 2006 Suited for large-scale industrial applications such as cereal production, Loss-In-Weight (LIW) Feeder Systems are single units that combine refill hopper and feeder. This eliminates need for connecting interface and related valves and seals. In terms of overall height, Vibra Screw LIW units measure 10-12 ft.

Raymond Corporation, The    Greene, NY 13778 0130
May 18, 2006 Available in 36 or 48 V configurations, 4-wheel, sit-down Series 4700 offers roomy operator compartment with intuitive, ergonomic controls. Steering system, with dual powered, counter-rotating ac drive motors, gives 5,000 lb Model 4700 C50HM advantage of Perfect Circle Steering(TM). To fit most any operator, semi-suspension seat adjusts for back tilt, operator weight, and lumbar support. Fingertip controls and bi-directional floor-mounted pedals suit high-shuttle operations.

Interroll Corp.    Wilmington, NC 28405
May 18, 2006 HTBL (High Torque Brushless) ZPA (Zero Pressure Accumulation) DriveControl module suits HTBL RollerDrive conveying in any postal, distribution center, or manufacturing application. Module installs without external control PLC, but also allows use of external PLC for integration into existing control scheme. It interfaces with PNP and NPN style photo eyes, and offers diagnostic capability with indicators that identify system-specific faults without PLC monitoring.

MK Automation, Inc.    Bloomfield, CT 06002
May 18, 2006 With load capacity of 44 and 220 lb, respectively, PHM-1 20 and PHM-A 20 Parallel Actuators are designed for linear load raising/lowering within conveyor systems providing parallel, right angle, or directional load transfer capabilities. Mechanical linkages translate horizontal cylinder force into vertical stroke, and cushioned cylinder stroke ensures smooth actuator operation. Vertical lift is up to ¾ in., travel time is 1.5 sec, and cycle time is 4 sec.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
May 16, 2006 Designed to apply small precision beads and small metered shots of precisely mixed resins like epoxies, acrylics, urethanes, and silicones, See-Flo® 202 Air-Draulic(TM) 202 is PD, 2-component meter-mix dispensing system. AirDraulic drive control provides preset material-dispensing profile with consistent dispense results. Including Snuf-Bak(TM) or No-Drip® dispense valve with seals matched to each dispense fluid, it is suited for long life in high-cycle dispensing applications.

ConProTec Inc.    Salem, NH 03079 2060
May 16, 2006 Two-component MIXPAC Hand-Held Cartridge Dispensing System consists of manual dispensing gun, cartridge, and static mixer. Designed with air venting technology that facilitates insertion, preassembled pistons minimize entrapped air. Pistons can be incorporated into production, making them suited for semi-automation applications.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
May 16, 2006 Material Master(TM) unit features Type 304 stainless steel construction on all product contact surfaces to facilitate cleaning. Seal-Master(TM) bag spout access chamber provides ergonomic spout access, while Flo-Master(TM) massaging system promotes positive material flow. Fully integrated pivoting vibratory feeder, which delivers product to 2 existing process tanks, is pivoted into position with one hand and has variable speed controls.

Jesco Products Co., Inc.    Sterling Heights, MI 48314
May 16, 2006 Model N-5130 Series Bench Top Dispenser meters, mixes, and dispenses non-corrosive, non-abrasive, level seeking materials, including epoxies, acrylics, urethanes, and polysulphides. Requiring 12 x 22 in. area, unit features adjustable speed TEFC ac gearmotor, cycloidal gear reducer, NEMA 12 rated control panel, and 2 component air operated mix gun with disposable static mixer. It offers up to 2,700 cc/min mixed material delivery rate at 1:1 ratio on low viscosity fluids.

Dri-Air Industries, Inc.    East Windsor, CT 06088
May 15, 2006 Stand-alone system allows individual drying parameters for 3 components - such as virgin, regrind, and colorant - and then mixes and conveys components on demand. Equipped with 4-bed dryer and sealed mixing chamber, system offers individual temperature controls for each component material and includes volumetric mixing (variable and fixed rate) augers placed under each hopper. Changing colorant/regrind ratios is possible via 10-turn potentiometers in control panel.

Lista International Corp.    Holliston, MA 01746
May 15, 2006 Combining modular drawers, shelves, and roll-out trays that can be interchanged and re-configured within system at any time, Storage Wall® System optimizes space by allowing large, medium, and small items to be stored together. Drawers and roll-out trays extend 100% for complete access to items and hold up to 440 lb each. Wide span beams, designed for bulk items, hold up to 1,500 lb and are available with various deckings. System is offered in 2 depths.

HASCO Hasenclever GmbH + Co KG    Ludenscheid D-58513  Germany
May 15, 2006 In K101 Series compound clamping plates, thermal insulating sheet is located and protected between 2 steel plates in sandwich technique, and all components are firmly bonded by adhesive and pressure. Insulating sheet is available in mold sizes from 196 x 196 to 396 x 496 mm and in steel qualities 1.2085 and 1.2312. Suited for applications with hot runners or heated mold tools, clamping plate facilitates handling for clean-room environments and enables magnetic clamping.

Huot Mfg. Co.    St. Paul, MN 55104-1701
May 15, 2006 Cup shaped with screw-on domed cover, Bit Buddy clip-on drill index is made from high impact plastic with molded side hook that clips onto tool belt, 5 gal bucket, or tool caddy. It stores 29 fractional drills from 1/16-½ in. by 64ths, and comes in 2 models, one for mechanics and one for jobbers length drills. Bit Buddy is water resistant to protect drill bits from inclement weather.