Stanley Vidmar    Allentown, PA 18105 1151
Jun 08, 2006 HazMat Storage and Control Center combines spill response cabinet and hazardous Safety Cabinet. Painted HazMat yellow for quick identification, spill response unit comes with drum puncture repair kit, gloves, boots, absorbent pads, safety goggles, non-sparking shovel, and Tyvek® suits. Suited for acids/corrosives, paint/ink, or flammable liquids, hazardous storage Safety Cabinets can be configured with shelves for storing up to 60 gal in various container sizes.

PKG Equipment Inc.    Rochester, NY 14624
Jun 07, 2006 Rhino seamless, spray-on, polyurethane linings help extend maintenance cycles by protecting against impact, abrasion, permeation, and corrosion. They also provide safety attributes such as vibration dampening, sound attenuation, and slip resistance. Non-porous linings are 100% solids tack-free within 40 sec, and adhere to various substrates regardless of shape or size. Flexibility prevents splitting, cracking, and de-lamination.

Schunk    Morrisville, NC 27560
Jun 07, 2006 TRIBOS Mini Toolholders and SVL Extensions can hold circuit board tools with straight shanks, eliminating need for special cutting tools with larger tool shanks. Clamping process can be done in 30 sec by means of manual SVP-2 clamping device or automatic SVP-3 clamping device with corresponding reduction inserts. Run-out accuracy and repeatability is less than 3 microns, and with rotational symmetric design, basic counter balance of less than 4 g/mm is guaranteed.

Bondhus Corp.    Monticello, MN 55362 9347
Jun 07, 2006 Available with Ballpoint, straight hex, Star, and ProHold® tip styles, T-handle products have handle welded to blade and dipped in cushioning plastic to impart strength, comfort, and grip. All tools are made with Potanium® steel and feature Proguard(TM) finish.

Lechler, Inc.    St. Charles, IL 60174
Jun 07, 2006 Part of modular, self-contained Portable Spray Platform, Lechler Spray Controller offers various functions and timing modes that can be selected by operator to customize spray performance. It controls performance of spray headers such as for coating applications on food and pharmaceutical lines. When connected to controller, AirMist(TM) and ViscoMist(TM) air atomizing nozzles offer optimized precision.

Keytroller Inc.    Tampa, FL 33614
Jun 06, 2006 Clamping over fork heel and elbow area, FORK PROTECTOR has sacrificial steel alloy casting that wears in place of fork. Tightened side screws and casting's internal radius prevent slippage of device, and it can be used until both sides of sacrificial alloy wear out. Model R comes with rubber bumper, Model M with low profile metal top, and both are available in 4, 5, and 6 in. widths. Protector can be installed on any internal combustion or electric forklift.

Elscint Automation    Pune 411026  India
Jun 06, 2006 Available in PLC and non-PLC controlled versions, Pneumatic Take-up Unit feeds engine valves with diameters from 20-50 mm and between 30-200 mm long at speeds from 40-100 pieces/min. Valves are transported in head up orientation from ground level up to height of 2 m for further feeding at that height. Increased heights are also available to meet application requirements.

Superlift Supension Systems    West Monroe, LA 71292
Jun 05, 2006 MegaCab 4 and 6 in. lift kits include engine-specific front coils for Hemi and Cummins/V-10 applications, polyurethane compression travel stops, track bar bracket, and Superide shock absorbers at all 4 corners. Replacement upper and lower trailing arms maintain alignment specifications and handling, while dropped pitman arm keeps steering linkage geometry within spec. Four-inch kit fits 35 in. tires, and 6 in. system clears 37 in. tires.

Walls & Forms Inc.    Dallas, TX 75374
Jun 05, 2006 Designed for hanging wall-mounted or suspended signage in windows or on walls, EuroSign(TM) GraphicHolders No 225, 150, and 75 feature hanger hook tab slot on back and Grip Strip 2-part co-extrusion that securely holds sign material. Models 225 and 150 measure 48 x 2¼ in. and 96 x 1½ in., respectively, and hold materials up to .08 in. thick. Designed for quick sign change, No. 75 measures 96 x ¾ in. and holds sign materials up to .04 in. thick.

Durham Manufacturing Company, The    Durham, CT 06422-2108
Jun 05, 2006 Available in 8 models from 5-12 ft long, Bar Cradle Trucks are 28 in. wide with 3, 4, or 5 cradles, determined by length. All are elevated to accommodate forklift loading. Featuring all welded steel construction, models rated at 4,000 lb have 3 in. C channel frames with 10 x 2 ½ in. center phenolic load wheels and 6 x 2 in. phenolic bolt-on swivel casters. Models rated at 10,000 lb have 4 in. C channel frames, 12 x 3 ½ in. load wheels, and 8 x 2 ½ in. phenolic bolt-on swivel casters.

Leyman Mfg. Corp.    Cincinnati, OH 45242
Jun 05, 2006 Designed for heavy-duty truck and trailer applications, LH Hide-A-Way(TM) is offered in lifting capacities of 1,850, 2,500, 3,000, and 3,500 lb. It features 80 x 45 in. platform plus wedge platform. Suited for low floor applications, LLB Hide-A-Way offers 80 x 35 in. platform and lifting capacities of 1,850 and 2,500 lb. Both include steel cabinet to protect motor and pump, spring assisted opening and closing of platform, and pressure-compensated flow controls.

PIAB Vacuum Products    Hingham, MA 02043
Jun 05, 2006 Featuring COAX® multistage ejector technology, IC Series is completely enclosed, protecting users from inhaling potentially harmful ingredients and preventing materials from damage due to external elements. Constructed of high-grade steel, units come in 3 different diameters and can convey up to 2 tons of material per hour. Conveyors are suited for transporting flakes, pellets, and powders in painting, textile coloring, water purification, rubber mixing, and tile molding.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jun 02, 2006 Powered by direct drive pump operating with 100% duty cycle, VT-Series Vacuum Lifter is designed to handle rubber sheet, coated carpet, and other flimsy materials as large as 72 x 48 in. Foam seal vacuum cups can be adjusted without tools and quick-connect couplings accommodate variety of pad attachments. Lifter features rugged wire-reinforced tube with a protective cover, vacuum gauges, and up/down controls built into ergonomic handle.

J. W. Winco, Inc.    New Berlin, WI 53151
Jun 02, 2006 Two-Way Connector Clamps are available in aluminum with matte shot-blasted finish or black powder coat finish, as well as in stainless steel. Bores of flanged clamps are machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395, and DIN 2462. Hexagon nuts are either zinc plated or stainless steel to suit screws. Clamps may be ordered with socket cap screws, hex cap screws, or adjustable clamping levers.

Sennebogen North America    Stanley, NC 28164
May 30, 2006 With operating weights under 55,000 lb, rubber-tired 821 M and track-mounted 821 R are powered by John Deere engines and suited for scrap recycling yards, logging yards, and waste transfer stations. Both are equipped with one hydraulic axial piston pump as well as computer free load-sensing hydraulic system with flow on demand control and pressure cut off function. Machines feature hydraulic cab and 13 kW generator driven off front of engine.

Electro Standards Laboratories    Cranston, RI 02921 3403
May 30, 2006 Measuring 4 in. long, air-actuated Spruance Cord Clamp is suited for all models of tensile testers, and can be used for testing yarn, thread, cord, twine, and similar materials. Made of bronze and stainless steel, clamp offers max capacity of 75 lb, operating pressure of 50-70 psi, and max opening of 1/16 in. It maintains uniform holding pressure regardless of item being tested. Drums are made with progressive radius and quipped with horn-shaped projection to facilitate loading.

Cortec Corp.    St. Paul, MN 55110
May 30, 2006 Utilizing Vapor phase Corrosion Inhibition (VpCI(TM)), Cortec® Clean Protective Packaging keeps metal parts rust-free for periods of months to 2 years and ensures they are ready for immediate use. Parts do not require cleaning or degreasing after removal from sheets or bags, which are available in recyclable and degradable materials. Along with multi-metal components with ferrous and non-ferrous metals, packaging also protects electronic and electrical components.

Creform Corp.    Greer, SC 29652-0830
May 30, 2006 Constructed using ESD static dissipative components, Mobile Cart features shelf type work area plus conveyor-style tote box lanes to hold and present parts. Because unit is transportable, it can be taken to various assembly points or locations in need of electronics repairs. System consists of pipe sections and metal or plastic joints. Metal joints are available with nickel plating to dissipate static, plus selection of height adjusting feet, grounding end caps, and casters.

Standard-Knapp, Inc.    Portland, CT 06480
May 30, 2006 Powered by servo motor, Versatron Active Product Transport (APT) is suited for packing reverse tapered, locking shape, and personal-care containers; trigger and unstable bottles; flasks; and other difficult-to-handle containers. Sensors detect number of bottles for proper packing, and machine gently catches each container to eliminate damage. Available with non-indexing and indexing case feed, packer runs at speeds up to 75 CPM with 8 lanes (max) operating simultaneously.

Thermadyne Industries, Inc.    St. Louis, MO 63017
May 30, 2006 Air Acetylene Deluxe Tote Kits provide everything needed for brazing ¾ in. with MC Tank or soldering 2 in. tubing with B tank. Both feature Extreme® self-lighting tip and Extreme® standard tip in addition to ergonomic handle with quick disconnect and tank tote that stores hose as well as additional tips. MC Extreme Air Acetylene Kit, constructed of steel, fits MC tank or MT-1 Mapp® tank, while B-Tote Extreme Air Acetylene Kit features composite construction and fits B tanks.