Techno Linear Motion Systems    New Hyde Park, NY 11040
Sep 26, 2006 With max speed of 5 m/sec, 500 Series consist of 2 sets of double precision ground, 12 mm dia, Cf53 steel shafts hardened to RC 62 that accommodate roller and bearing carriages. Shafts are pulled together by support blocks, ensuring that they are parallel to less than 0.02 mm/1 m for precision motion in load positioning applications. Available in 16 sizes from 400-3,000 mm, products have middle cavity designed to house items such as wiring, cylinders, screws, or motors.

Techno Linear Motion Systems    New Hyde Park, NY 11040
Sep 26, 2006 Designed for load positioning applications, 400 Series features enclosed aluminum housing and max speed of 5 m/sec. Rails consist of double precision ground, 12 mm diameter, Cf53 steel shafts hardened to RC 62 ±2 that accommodate roller and bearing carriages. Shafts, pulled together by support blocks, are parallel to less than 0.02/m. Products are available in 16 sizes from 400-3,000 mm.

Techno Linear Motion Systems    New Hyde Park, NY 11040
Sep 26, 2006 Offering linear motion for variety of positioning applications, Series 300 features 2 hardened steel shafts spaced 50 mm apart, resulting in torsional stability and providing max linear speed of 10 m/s. Guide rails are available in 16 lengths, ranging from 400-3,000 mm, and can be extended to provide virtually any length of travel by staggering steel rails on base plates.

DIRAK    Chantilly, VA 20151-1220
Sep 26, 2006 SNAP-LINE mini compression latch provides secure closure for any sheet metal cabinet. Smooth function aligns cam behind frame, and integral red/green indicator shows if latch is closed or open position. Set of spring-loaded wings are inserted into channel in latch housing, allowing them to move freely for insertion into panel cutout. As wings retract after passing through cutout, latch is held securely in place. Latch provides up to 8 mm of compression.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Sep 26, 2006 Featuring 2 independently actuated dump carriages, Lift & Seal System(TM) accepts containers loaded with pallet jack at floor level and discharges product 69 in. above floor level. It hydraulically seals containers to pour hood, eliminating dust and product contamination. Custom-designed for size, weight, or discharge height requirements, construction elements include washdown-duty tubular carbon steel frame, Steel-It® epoxy finish, and 304 stainless steel product contact surfaces.

Thayer Scale-Hyer Industries, Inc.    Pembroke, MA 02359
Sep 26, 2006 Providing feed rates up to 3,000 t/hr, Heavy Industry Weigh Belt Feeders feature low deflection, non-wearing Force Measurement Suspension System weight sensing scale. Weight transducer is located outside feeder enclosure to prevent damage and tare build-up. Dead weight of weigh idler and belt is mass-counterbalanced for resolution and signal-to-noise ratio, and machines allow re-rating of feeder capacity for changes in material or density.

TKF, Inc.    Cincinnati, OH 45203
Sep 25, 2006 Utilizing mechanical linkage to guide lifting, Pop-Up Transfer Conveyor lifts items vertically, then conveys them 90° to adjoining conveyor. Strands are driven by motorized roller, eliminating chain drives and resulting in quiet operation. There are no vertical guides or cam ramps used for positioning, and no slides or bearings used in construction. To ensure non-contact product spacing, variable speed driver control card is included to control speed differential.

PAM Fastening Technology    Charlotte, NC 28208
Sep 22, 2006 Along with adjustable operating temperatures from 284 to 428°F, HB 220 applicator features mechanical stroke limitation mechanism that lets applicator control amount of adhesive applied and minimize waste. Adjustable trigger conform to user's hand size, promoting comfortable grip and limiting fatigue. Weighing 20 oz, product uses 220 W of power and has electronic temperature controls with thermometer on applicator tool. Unit accepts 10 in. glue stick.

Standard-Knapp, Inc.    Portland, CT 06480
Sep 22, 2006 Operating at speeds from 100 to 1,600 bottles/min, Zero-Gap infeed packaging machine incorporates precise geometry and sensors to ensure continuous container supply to downstream lanes and grouping section. Line pressure and handling properties make system suitable for compressible or hot-filled PET, lightweight glass, and aluminum. Compatible with variety of platforms, it can be programmed to handle round containers of all sizes.

Schunk    Morrisville, NC 27560
Sep 22, 2006 Used with SRU rotary actuator, Electric Feed-Through Unit enables digital signals to be conveyed to sensors and power to be supplied to digitally operated actuators. Using jumper, EDF-SRU can be reconfigured to Bus operation by routing power supply and Bus signal via feed-through. Input and output ends are equipped with housing connectors or sockets. For output end, users can choose between M12, M8, or miniature M5 connector.

Schunk    Morrisville, NC 27560
Sep 22, 2006 Designed to fit O-rings not only to shafts, but also in holes, 6-finger Model ORG 85 features integral stroke and triple jaw sets that move independently from one another. O-ring is first released from first 3 fingers, and then released from last 3 fingers in controlled manner. Clamping width of diameter to be fitted ranges from 5-150 mm. Stroke of 2 sets of triple jaws range from 0-21 mm for triple jaw A and from 0-15 mm for triple jaw B.

Schunk    Morrisville, NC 27560
Sep 22, 2006 With MAGNOS Clamping System, 5-sided machining is possible at high holding forces, without any interfering contours of clamping device. Pole extensions that act as workpiece support allow user to position different workpieces rapidly and precisely. Uniform clamping force is possible due to poles' quadratic geometry. Pole sizes of 50, 75, and 100 mm are available, enabling holding forces to be tailored to individual requirements.

Schunk    Morrisville, NC 27560
Sep 22, 2006 With 0.005 mm repeatability, UNILOCK provides accurate set-ups of workholding fixtures for production run machining and grinding operations. Through its clamping system, workpieces can be set and moved through multiple machining operations with minimal resetting. Product consists of stationary modules, installed individually or in multiples, directly on machine's worktable or tombstone. Existing workholding devices mount on UNILOCK clamping plates that mate precisely to modules.

Schunk    Morrisville, NC 27560
Sep 22, 2006 Offering run-out accuracy of less than 3 microns and feed rate up to 20 m/min, TRIBOS-RM is designed for cutting speeds up to 50,000 rpm in applications that require low interference. Clamping process, which uses elastic forces of material to clamp tool shank, can be done within 30 sec via SVP-2 (manual) or SVP-3 (automatic) clamping device together with corresponding reduction inserts. Due to rotational symmetric design, basic counter balance of less than 4 g/mm is ensured.

EFD Inc.    East Providence, RI 02914-1342
Sep 22, 2006 Using precisely timed air pulse to determine amount of material to be dispensed, Model Ultra® 2415 Workstation is designed to deposit identical amount of adhesive on every assembly. Cyanoacrylate or super glue is dispensed from syringe barrel that can be hand-held or mounted on optional arm. Features include 0-15 psi pressure regulator, microprocessor-based digital timer, and simultaneous digital display of all dispensing parameters.

Goodyear Tire & Rubber Co., The    Akron, OH 44316
Sep 22, 2006 With chip- and chunk-resistant tread compound for enhanced toughness and tread wear, Wrangler® SilentArmor Pro-Grade tires are manufactured with 2 high-tensile steel belts and DuPont(TM) KEVLAR® layer to help absorb road noise. Rim Lock reduces rim slip to minimize balancing requirements, Rugged Rim Guard protects wheels from accidental curb damage, and rugged tread pattern provides consistent tread contact patch at various load and speed conditions.

ConProTec Inc.    Salem, NH 03079 2060
Sep 21, 2006 MIXPAC B System consists of manual dispensing gun, cartridge, and static mixer, all designed to work together as integrated system. Available in 50 mL, fully assembled, 1:1 ratio polypropylene cartridges, it features separate cylinders, pre-assembled pistons, and static mixer-cartridge-nose plug interface. Unique connection eliminates possibility of cross contamination and plugged cartridges. System also works with MIXPAC's DMA 51-00-10 manual dispenser.

Mayfran International    Cleveland, OH 44143-0038
Sep 19, 2006 ConSep single-platform chip conveyor/coolant separator removes chips and contaminates to 50 microns in size. Separator has internal chip handling (auger) system, which also handles fines and sediment, and backwash that automatically cycles to indexing filter drum's poly fiber media, making unit maintenance free. Clear access panel enables visual inspection of cleaning process, and filtered coolant is held in holding tank for return to machine tool.

PARI Respiratory Equipment, Inc.    Midlothian, VA 23112
Sep 19, 2006 When combined with LC Sprint nebulizer, PRONEB Ultra II enables treatment times of approximately 5 minutes for asthma, cystic fibrosis, and COPD therapies. Unit features carrying handle and changeable filter that lasts up to 500 hours. Compressor can be accessorized with PARI Baby Conversion Kit for treatment of babies and young children.

Lyndex-Nikken Inc.    Mundelein, IL 60060
Sep 18, 2006 Featuring 105 mm diameter table and max workload of 15 kg per spindle, multi-spindle Model 5AX-2MT provides rotational speed of 22.2 rpm and tilting rotational speed of 11.1 rpm. Both rotary and tilting axes can be controlled by machine's CNC control or via independent controllers. Included braking system produces 147 Nm clamping torque. Options are available to meet workholding, fixturing, and chucking requirements.