Creform Corp.    Greer, SC 29652-0830
Jun 12, 2007 Designed for use at workstations, assembly points, machine loading positions, or kitting locations, dual angle flow rack gravity feeds containers to their point-of-use. Angled conveyor-type aisle slopes lengthwise to allow containers to flow from load end to picking end, then second angle tilts container to lower one end of box. Units can be constructed to specified, fixed height to accommodate one person, or as height adjustable structures for use with multiple personnel.

Nu-Star, Inc.    Shakopee, MN 55379
Jun 11, 2007 Designed for wide variety of load moving needs, Power Pusher® material handling equipment is designed for pushing or pulling wheeled or semi-wheeled loads up to 150,000 lb. Pedestrian-operated, battery-powered unit relocates railcars, drums, or paper finishing rolls, and suits cleanroom, Class I Div. I, and washdown areas. Sealed unit, constructed of stainless steel, is also available in model that withstands harsh washdown environments.

Integra Companies, Inc.    Devens, MA 01432
Jun 08, 2007 Constructed of stainless steel, ergonomic JO DOLLY has greaseless, non-bearing casters and low-profile design that minimizes tip-over potential, even across thresholds and up ramps. Cradle-style base creates low center of gravity for safely carrying 100-140 high-purity liter tanks, and handle is directly connected to dolly base. Custom casters eliminate need to remove tank for autoclave and custom built area in base allows for bottom port on tank.

Abresist Corp.    Urbana, IN 46990-0038
Jun 08, 2007 Made of hard aggregate material, cement binder, and micro and nano silica, KALCRET features mixing time of 5 min and can be applied overhead. Hard aggregate provides wear protection, while micro and nano silica fill pores between cement portions. Suitable for temperatures up to 2,192°F, KALCRET reaches high strength and wear resistance after 8 hr. It is available in troweled, cast, or sprayed-on versions for lining components with horizontal, vertical, inclined, curved, and flat surfaces.

Robert Bosch GmbH    Waiblingen D-71332  Germany
Jun 08, 2007 Model FLT1020 vial filling system processes vials from 16-52 mm in diameter, 25-95 mm in height, and with 13-22 mm neck finish for pharmaceutical packaging. Requiring no sized parts for different vial diameters, system offers variable tray size options of 8-15 in. width and 12-18 in. length. Other features include maximum throughput of 30 vials/min, linear table top design, and compatibility with feeding systems, isolators, tray on and tray off stations.

LM-76 Linear Bearings    East Longmeadow, MA 01028
Jun 08, 2007 Ready-to-run linear positioning stages are available with 6 mm lead anti-backlash lead screws or 4 mm lead heavy duty ball screws. Lead Screw versions are available in 10, 30, and 40 mm travel lengths and feature 0.03 mm repeatability; 0.03 mm/full step resolution; 100 mm/sec max speed; and 4.9 N max load. Ball Screw versions come in 40, 60, 120, and 200 mm travel lengths and feature 0.01 mm repeatability; 0.02 mm/full step resolution; 120 mm/sec max speed, and 39.2 N max load.

New Pig Corporation    Tipton, PA 16684 0304
Jun 08, 2007 Designed for compliant storage of multiple IBC units, expandable PIG® Multi-IBC Modular Spill Pallet system features flow-through connections that let individual components share sump capacity. Heavy-duty pallet sections support up to 9,000 lb UDL and have profile height of 8.75 in. to facilitate loading. Constructed of 100% polyethylene, system accommodates all 275 gal IBC units. Additional pallet sections and expansion tanks can be connected to system for increased sump capacity.

Flexicon Corporation    Bethlehem, PA 18020 8006
Jun 08, 2007 Featuring stainless steel contact surfaces, Weigh Batching System discharges material from bulk bags, de-lumps product, and feeds it gravimetrically into rigid bins. Bulk-bag-to-hopper interface consists of manual Spout-Lock® clamp ring at top of pneumatically actuated Tele-Tube® telescoping tube. Pneumatically actuated Power-Cincher® flow control valve cinches bag spout concentrically, while Flow-Flexer® bag activators raise and lower opposite bottom edges of bag, loosening compacted materials.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jun 07, 2007 Featuring remote power station, hoist-based VB-Series lets one person pickup and rotate cylindrical objects from side for stacking and loading operations. It offers variable speed control from creep to 115 fpm, and has 2 foam vacuum pad attachments to accommodate ribs and moderately uneven surfaces. Designed with lightweight aluminum and steel frame assembly, lifter-rotator comes with fingertip controls on handlebar, vacuum gauge, quick-release, and check valve.

National Vinyl Products, Inc.    Sainte Genevieve, MO 63670
Jun 07, 2007 Manufactured from high-quality leather-like vinyl, Deluxe Real Estate Pouch measures 16 in. wide and 9¾ in. folded. It includes 1 clear card holder in front and 2 under flap with Velcro closure. Available in various colors, legal size pouch can be customized with agency name using silk screen, foil stamping, and debossing decorative techniques.

Green Valley Inc.    Mount Zion, IL 62549
Jun 06, 2007 Titan 2327 enables safe, efficient transfer of palletized steel coils to coil cart. Load deck rotates 90° to invert coil as well as facilitate extraction from manipulator and placement onto mandrel of coil feed system. Via pushbutton controls, operator turns on manipulator to pivot deck and bring coil to upright position. During process, palletized coil slides on flat deck until settling in tapered cradle lining. Coil cart then drives under tapered cradle and extracts coil.

Kinetic Systems, Inc.    Boston, MA 02131
Jun 06, 2007 Available in 4 standard configurations, breadboards provide flat, stable surface for mounting or assembling lasers/small optical systems, prototyping, and precise inspections. Each configuration features natural frequency, nominal broadband damping and flatness of ±0.004 in. over 24 x 24 in. area. Depending on series, nonmagnetic and ferromagnetic products feature extruded aluminum or honeycomb structural cores and anodized aluminum or stainless steel skins.

Creform Corp.    Greer, SC 29652-0830
Jun 06, 2007 Using Creform® System of pipe sections and joints, rack system consists of 5 level flow rack with each level being 2 lanes wide providing load capacity of 350 lb, totaling combined structure capacity of 1,750 lb. As each end of shelf supports can be adjusted independently, rack levels can be set for height settings and to modify incline angle for each layer to obtain proper material/container flow. It can be built with skatewheel style or full-width roller conveyor track.

DE-STA-CO Industries    Madison Heights, MI 48071
Jun 06, 2007 DCM series of conveyors are available in light, medium, and heavy duty specifications with pivotal motor mounts for continuous operation and fast belt changes. With compact design and integrated control, light duty conveyor can transport up to 44 lb of parts. Medium duty unit comes with 2.4-9.8 in. chassis widths, while heavy duty unit is available in widths from 7.9-31.5 in. and driven by 230/480 V spur gear motor that permits transportation of up to 275 lb.

J. W. Winco, Inc.    New Berlin, WI 53151
Jun 06, 2007 Arched Pull Handles are suited for applications where it is necessary for sliding folding doors or opening cabinet drawers to be accomplished with single finger. Offered in black powder coated pebble finish or bright tumbled finish, aluminum handles are available with tapped holes or counter bored holes for socket cap screws.

Pflow Industries Inc.    Milwaukee, WI 53209
Jun 05, 2007 Mounted on casters, vertical lift can be rolled into desired position, typically by fork trucks. Product offers vertical rise of up to 10 ft and can handle capacities up to 1,000 lb. Each lift is shipped, pre-assembled, with gates and safety enclosures.

Blue Giant Equipment Corp.    Brampton, ON L6W 3K2  Canada
Jun 05, 2007 Offering capacities from 25,000-40,000 lb, Mantis Series features yieldable lip that absorbs incoming trailer impact to prevent platform and trailer damage. Single pushbutton activation, for deck and lip, can be located on one remotely wall-mounted control station, complete with external reset button. Equipped with various safety features, series comes in 6, 8, or 10 ft lengths and 6, 6.5, or 7 ft widths. Working range is 12 in. above to 12 in. below dock level.

PARKER / PAGE International Hose    Fort Worth, TX 76106
Jun 05, 2007 Designed for food and beverage industry, PAGE-flex SBF(TM) hoses exhibit kink and vacuum resistance as well as optimized bend radius. Seamless tube resists collection of bacteria, while additional reinforcement helps withstand internal pressures. Along with helical wire for full vacuum capabilities, hoses feature weather- and abrasion-resistant cover. They handle temperatures from -40 to +325°F and comply with FDA, 3A, and USDA product standards.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jun 04, 2007 Equipped with FlexGrip(TM) vacuum pad attachment which conforms to curved surfaces, VT-Series Vacuum Tube Lifter lets one person handle large, bulky loads weighing up to 150 lb. Providing 100% duty cycle with instant attach and release, unit features adjustable up/down controls built into handle and has 360° swivel top for unrestricted rotation. It also includes vacuum pump and gauge, wire-reinforced tube, and disconnects for pad attachment.

Veri-Tek International Corporation    Bridgeview, IL 60455
Jun 04, 2007 Featuring crane with base rating of 50 tons at 6 ft radius, truck meets published road and federal bridge laws when configured with tag axle in addition to tandem driving axle. Other features include 4-section, 96 ft boom; free swing with pilot operated controls; ACCUSwing metering system; ROCSolid radio outrigger control; and CANbus Load Moment Indicator with wireless ATB. Area of operation includes over rear, 360°, and on rubber capacity.