Micro Air Clean Air Systems    Wichita, KS 67205
Aug 13, 2007 Powered by EPACT motor, Model XA46 Extreme Air Downdraft Table offers solution to indoor air pollution problems such as welding smoke and fumes, grinding dust, and process powders. Portable unit features self-contained design that eliminates need for ducting and operates with quiet sound rating that exceeds OSHA standards. Cartridge filters are cleaned by Roto-Pulse(TM) system. Model XA34 is also available with 3 x 4 ft work area.

Toyota Material Handling U.S.A., Inc.    Irvine, CA 92623-7419
Aug 09, 2007 Suitable for general warehousing and retail operations, 8-Series includes walkie pallet truck, tow tractor, center control rider pallet truck, and end control walkie/rider pallet truck. Trucks use CAN-bus communication to control all functions, and include multifunction control handle that digitally displays hour meter, performance parameters, battery discharge, and fault code information. Soft-cushioned rider platform minimizes fatigue by dampening vibration.

FEI Co.    Hillsboro, OR 97124-5830
Aug 09, 2007 Vitrobot Mark IV cryo sample preparation tool physically fixates biological structures within ultrathin vitrified ice layers so samples can withstand high voltages such as those used in 3-dimensional transmission electron microscopy. Features include Linux operated touchscreen interface and robotics, and automated vitrification medium to liquid nitrogen atmosphere transfer.

Xtra Lease    St. Louis, MO 63146
Aug 09, 2007 Promoting fleet productivity and minimizing idle trailer time, customized version of QUALCOMM's T2 Untethered TrailerTRACS asset management system features landmarking tools and ability to isolate dormant trailers at said landmarks. Integral tools promote fleet visibility and tighten security with options for pinging trailers as well as monitoring cargo and door sensor events. With this solution, users can customize trailer tracking reporting based on freight patterns.

Ripley Company    Cromwell, CT 06416
Aug 08, 2007 Constructed with cast aluminum jaws, TC-1 is designed for use as tool stop when stripping and shaving large transmission cables. This bar style clamp with quick-release adjustment is suited for use on cables with ODs ranging from 2-5 in. Weighing 2.63 lb, tool measures 14.86 in. long.

Raymond Corporation, The    Greene, NY 13778 0130
Aug 08, 2007 With respective load capacities of 3,000-3,500 lb and 3,000-5,000 lb, models 4100 and 4200 feature 3-wheel stand-up design that facilitates handling in tight spaces. Quick-disconnect couplings are provided for attachments, aiding change from forks to attachments such as drum clamps or slipsheets. When switching attachments, anti-drip no-leak valves eliminate hydraulic fluid spills. Single-axis multifunction control handle includes 4-way switch for sideshifting forks and tilting mast.

Aremco Products, Inc.    Valley Cottage, NY 10989
Aug 07, 2007 Available in pint, quart, gal, and 5 gal pails, Corr-Paint(TM) CP3015-AL, ultra-high temperature coating is used to inhibit oxidation of carbon steel and cast iron exhaust headers used in automotive, truck, and industrial applications to 1400°F. It is formulated with advanced, waterborne silicate binder system filled with blend of aluminum and ceramic corrosion inhibiting pigments. Product is supplied in ready to use viscosity of 250-450 Cp and solids of 71.0% by weight.

Simplex Conveyor LLC    Murrieta, CA 92563
Aug 06, 2007 Designed for package handling industry, MDR Docksider features continuous roller surface and comes in 6 ft 6 in. and 9 ft 0 in. extensions with BF dimensions up to 48 in. and speeds to 328 fpm. Motor Driven Roller (MDR) single-stage conveyor uses same Holjeron 24 Vdc High Torque MDR in all applications, and dual operator controls and reversing capabilities are standard. Solution has 5 ft long belted entry section and remaining rollers can be optionally coated.

Standard-Knapp, Inc.    Portland, CT 06480
Aug 03, 2007 Engineered to eliminate line jams during packaging process, Zero-Gap II(TM) Infeed monitors and controls product movement to maintain constant low line pressure and optimize machine uptime. Complete product conveyor assembly, installed between upstream product conveyor and original infeed of machine, features flexible design and gentle handling capabilities. It distributes product from nested position to multiple lanes at speeds up to 2,000 bottles/min with zero gaps.

Sentry Group    Rochester, NY 14625
Aug 03, 2007 Sentry®Safe Fire-Safe® Fingerprint Safe DA3930 protects digital assets and security-sensitive documents. Operated with fingerprint swipe or programmable electronic code, fire- and water-resistant safe is ETL verified for 2 hr fire protection of digital media up to 1,850°F. Biometric lock features tubular key and backlit electronic LCD keypad, and enables storage of up to 14 fingerprints. For added protection, DA3930 comes with hardware to bolt safe to floor.

Mitee-Bite Products Inc.    Center Ossipee, NH 03814
Aug 03, 2007 Consisting of a steel wedge in an aluminum channel and a screw, Mitee-Bite Uniforce clamp wedge-style edge clamp has ability to hold 2 workpieces while exerting equal pressure on each piece. By tightening screw, wedge is lowered in channel, expanding channel to exert holding force on side of 2 workpieces. Clamp can hold flat or round workpieces, and holds most shapes either vertically or horizontally. Compact design allows increased load density.

Ripley Co.    Cromwell, CT 06416
Aug 02, 2007 Ruggedly built with lightweight cast aluminum jaws, TC-1 Transmission Cable Clamp is designed for use as tool stop when stripping and shaving large transmission cables. Bar-style clamp features quick release adjustment and is used on cables ranging from 2-5 in. OD.

AGI - American Grippers Inc.    Trumbull, CT 06611
Aug 02, 2007 Available in 10 sizes, AGW Parallel Grippers provide 50-150 lb of gripping force and come in 6 strokes of 0.75, 1.00, 2.00, 2.50, 4.00, and 6.00 in. Sealed design repels chips and contaminates from internal mechanism. Each jaw is supported by 2 full shafts through length of body. Featuring rack and pinion design, grippers are offered in synchronous or non-synchronous models with independent jaw motion for non-centering applications. All include dowel pin holes for gripper mounting alignment.

Erie Plastics    Westborough, MA 01581
Aug 02, 2007 Available in 26 mm size, Pop N' Shake(TM) closure allows consumers to create their own blended drinks on demand. Ingredients dispense with one turn of tamper-evident dust cover and subsequent pop of inner-cap chamber, allowing consumers to watch flavor, vitamin, or mineral of choice fuse with their preferred bottled drink. PET chamber works with liquid and powder, and moisture/oxygen barrier provides secure separation from active and inactive ingredients.

Navman    Foothill Ranch, CA 92610-2807
Aug 02, 2007 Navman Wireless Fleet Manager allows users to map vehicle and driver locations, analyze vehicle and driver activity, define driver territories, and communicate directly with vehicle operators. Offered as optional add-on, wireless Mobile Data Terminal 860 lets fleet managers send secure 2-way text messages to vehicle operators, who can then respond using customizable, pre-programmed replies. Solution also incorporates features for driver management as well as driver-specific PINs.

Flexicon Corporation    Bethlehem, PA 18020 8006
Aug 01, 2007 Bulk Bag Conditioner-Unloader System loosens bulk solid material solidified during storage and shipment, allowing material to discharge through bag spout. While integral configuration of conditioner eliminates time, labor, and equipment needed for separate loading of bulk bags into standalone conditioner, design also minimizes floor space requirements. System employs 2 hydraulic rams with contoured end plates and electric hoist, which includes motorized trolley for loading/unloading.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Aug 01, 2007 Designed to work with Unilock Clamping System, 210 mm Adapter Kit mounts to any rotary table with T-slot faceplate, enabling operators to quickly unlock Unilock chuck and change setups or workpieces. Clamping system preserves repeatable accuracy of .0002 in. or better with retention force greater than 11,000 lb. Since it only takes seconds to open chuck and swap out workpiece or fixture, Unilock optimizes productivity of machine tools running rotary indexing tables.

Ammeraal Beltech Modular (Uni-Chains)    Reading, PA 19611
Aug 01, 2007 Open top uni SNB M2 20% includes lockpin feature for cleanability and has flat surface allowing gentle transport of sensitive products. Suited for incline conveyors, 1 in. pitch belt has products supports with slotted/open hinges for drainage. Applications include meat cooling and freezing lines, pasta blanchers, pasteurizers, can mass handing, and bakery.

J. W. Winco, Inc.    New Berlin, WI 53151
Aug 01, 2007 Available in inch and metric sizes, Heavy Duty Adjustable Levers are offered in tapped and stud versions constructed of carbon steel with black oxide finish or stainless steel (American standard 303 series) with sandblasted satin finish. Both versions have black phenolic plastic ball knobs and are suited for applications in which parts must be clamped in confined space or where particular lever position is required.

Polar Ware    Sheboygan, WI 53082
Aug 01, 2007 Suited for foodservice operators and their kitchen staff, The Edge(TM) is formed with ½ in. raised rim all way around pan to provide means with which personnel can grab, hold, and handle pan for setting it into or removing it from 12 x 20 in. well. Grip-N-Lift(TM) feature eliminates need to remove pan by prying it up with utensil and promotes safe handling around hot steam. Simultaneously, rim or edge design provides pan-to-table seal for optimal energy efficiency and corner strength.