PHD, Inc.    Fort Wayne, IN 46899
Jan 10, 2007 To support diverse applications, Series SFM Multiple Position Slide is equipped with modular multi-position stop system that includes optional mid-position actuators and adjustable end stops. Stainless steel band and saddle seal protect bearing system from dirt and contaminants, while optional adjustable cushions offer precise control of slide deceleration. Optional cap-mounted shock absorber is available to absorb end-of-travel kinetic energy.

Flexicon Corporation    Bethlehem, PA 18020 8006
Jan 10, 2007 Hydraulic Bulk Bag Conditioner loosens bulk solid material that solidifies during storage and shipment, facilitating subsequent material discharge. Available as stand-alone unit or integral component of bulk bag discharger, machine uses 2 hydraulic rams with contoured end plates to press opposing sides of bulk bags. Optional hydraulically actuated, variable-height turntable allows in-frame bag rotation and conditioning of bulk bags at varying heights.

Advance Lifts, Inc.    St. Charles, IL 60174
Jan 09, 2007 Closed-loop Position Control option can move platforms to multiple positions with precision and repeatability to ± 1/16 or ± 1/32 in. It requires continuous-duty-rated power unit and consists of linear displacement transducer, proportional hydraulic valve system, PLC, necessary supporting hardware, and proprietary software program. Operation can be initiated automatically or via operator, machine inputs, or network connection.

VACUUMSCHMELZE GmbH & Co.    Elizabethtown, KY 42701
Jan 09, 2007 Designed for use in wind generators, NdFeB-based permanent magnets offer temperature stability up to 230°C and minimal variation in magnetic properties. Products are resistant to demagnetization and exhibit corrosion stability in salty air and damp atmosphere. Use of permanent magnets in rotor of generator minimizes power loss and maintenance, while high pole numbers enable generators to be adjusted to low rotation of rotor blades.

Beyond Products Inc.    Milford, CT 06460
Jan 08, 2007 Electronically powered Mule(TM) Hand Lift maneuvers in tight areas and fits through 28 in. doorways, allowing it to go where forklifts cannot. It provides screw-driven lift of 48 in. with lift speed of 1.5 ips or 27 seconds from bottom to top. Operating from 12 V rechargeable battery that lasts for 90-110 lift cycle per charge, truck is designed to transport and lift up to 350 lb of material while serving as work positioner and customizable workbench.

Thermo Electron Corp.    Waltham, MA 02454
Jan 08, 2007 Suited for life science, clinical, and industrial applications, +4ºC refrigerators and -20ºC freezers come in storage capacities from 700-1,500 L. All units use polyurethane foam insulation and forced-air evaporators to maintain efficient temperature regulation and promote environmental stability. Along with anti-condensing heaters, storage solutions feature digital displays, over/under temperature alarms, battery back-up, internal lighting, and clear glass doors.

Thermo Electron Corp.    Waltham, MA 02454
Jan 08, 2007 Designed for safe cold storage of precious samples, +4°C blood banking refrigerators and -20 to -45ºC plasma freezers feature solid steel construction and incorporate over/under temperature alarms, battery back-up, and key lock security. Refrigerators come in 8 models, from 130-1,500 L, and offer internal waterproof lighting and anti-condensing heaters. Available in upright and chest models, 113-760 L plasma freezers maintain stable temperatures and provide rapid temperature recovery.

FKI Logistex North America    St. Louis, MO 63132
Jan 08, 2007 Using automated storage and retrieval, picking system offers continuous replenishment, dynamic pick faces, and consolidated trash removal. It is designed for less-than-full-case picking and uses FKI Logistex mini-load cranes. Manual labor of split-case picking is minimized via demand-based replenishment, and order fulfillment is optimized for speed and accuracy. System also integrates with pick-to-light, EASYpick GoKart, RF devices, Accuzone® 24 V conveyors, and Warehouse Optimizer(TM).

Anver Corp. - Anver.Com    Hudson, MA 01749
Jan 05, 2007 Anver VT-PLA Pallet Lifting Attachment fits VT-series tube lifters to let 1 person lift and stack multiple pallets using vacuum up/down controls. Unit features lightweight aluminum extruded forks with adjustable balance point fitting pallets up to 48 sq in. Interchangeable with adjustable quick-connect vacuum pad attachments, device includes built-in handle controls, vacuum gauge, and 360º swivel top for unrestricted rotation.

J. Schmalz GmbH      Germany
Jan 05, 2007 Used for handling steel sheets of all sizes and shapes, VacuMaster Eco is comprised of basic modules such as ergonomic operator handles, main and cross-beams of various lengths, and suction pads. It uses power of lifting tackle to generate vacuum needed to facilitate lifting/lowering and handling of all types of loads. Without requiring electricity or compressed air, units are available for max load capacities of 250, 500, and 750 kg.

Interroll Corp.    Wilmington, NC 28405
Jan 04, 2007 Designed for airport baggage handling industry, 1450 heavy-duty conveyor roller is available in 3.5 x .120 in. steel tube, polyamide Interroll housings with ABEC 1 6205ZZ precision ground chrome steel ball bearings. Shaft options include .687 in. hex shaft and robust 20 mm dia version that is end drilled and tapped for bolted construction.

Harrington Hoists, Inc.    Manheim, PA 17545 1754
Jan 04, 2007 Available in 2 standard lift lengths of 10 and 20 ft, Model CX features aluminum body with steel frame and grade 100, nickel-plated load chain with stainless steel hand chain for wear resistance. Load limiter prevents lifting loads over rated capacity, while metal chain guide allows for smooth operation. Model CX is recommended for light loads in high or difficult-to-reach places such as duct installation, automobile maintenance, and crane repair.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 04, 2007 CMD cable and wire marker dispenser is portable, pocket-sized, and reusable, and packs into tool boxes or bags. Featuring loop for connection to lanyards, hooks, or tool belts, it includes 32 x 6.4 mm markers made from Dupont Tyvek® with oil-resistant acrylic adhesive backing. Dispensers are available with numeric markers from 0-9, and color-coded markers in white, yellow, green, blue, orange, red, violet, brown, black, and gray.

Ingersoll-Rand Co.    Annandale, NJ 08801
Jan 04, 2007 Comprised of 5 models with rated capacities from ¾-6 tons, impact-resistant SLB Silver Series meets or exceeds all regional safety requirements and are CE-certified. Deep lug knobs and double reduction gearing allow for one-handed operation with minimal handle effort, while double chain guides ensure proper load chain tracking and smooth operation around load sheave. Design also incorporates alloy load chain, hardened swivel-latch hooks, and automatic inertia brake.

FKI Logistex North America    St. Louis, MO 63132
Jan 04, 2007 Offering layout flexibility, LS-4000E tilt-tray and LS-4000CB cross-belt sorters utilize linear synchronous motor that eliminates contact between moving parts and reduces noise down to 62 dBA max. Products provide full access to multiple floor levels with frame inclines up to 10° and track level changes up to 23 ft in straight and curved sections. While LS-4000E sorts single-tray, 110 lb items up to 39 x 39 in., LS-4000CB sorts 66 lb items up to 24 x 24 in.

Clean Air Products Clean Air Systems Div.    Minneapolis, MN 55445 1828
Jan 03, 2007 Available in 3, 4, 5, 6, and 8 ft lengths, Series 38ST Wire Hanger Racks come in single and double row models for access from both sides. Variety of hanger styles and options are available to suit specific application needs, including removable open-loop, non-removable closed-loop, no take removable, hangers with labels and hanger spacers.

Koch Knight LLC    East Canton, OH 44730
Jan 03, 2007 Suited for vessels in corrosive chemical processing and mining facility construction, PYROFLEX® Sheet Membrane System withstands extreme environment of autoclave service. System resists inorganic alkalines, such as caustic soda and salts, and does not experience thermal decomposition under 500°F. Sheets fuse directly to metal and concrete surfaces, and adjacent sheets are butted and fused together with joint strips for continuous uniform lining with no lap joints.

IAC Industries    Brea, CA 92821 2926
Jan 03, 2007 Offering custom configurations, Workmaster(TM) Storage Cabinet Workbenches come in 60, 72, and 96 in. lengths with depths of 30 and 36 in. and overall heights of 33 and 36 in. Work surfaces include standard, ESD laminate, solid maple, or stainless steel. Supporting 1,000 lb distributed static load, benches offer 9 drawer configurations and drawer heights of 3, 6, and 12 in. Weight capacity is 100 lb per drawer using Accuride® full ball bearing, 95% extension drawer slides.

Bosch Rexroth Corp., Pneumatics Div.    Lexington, KY 40511
Jan 03, 2007 Featuring die-cast zinc body, Series NL1 Mini FRLs offer transparent polycarbonate and solid metal bowls, and choice of 1/8 or ¼ in. NPT ports. Units provide filtration choices of 5, 0.3, or 0.01 micron with carbon filters for odor and vapor removal. Filter drain options include semi-automatic, float drain - normally closed, and float drain with overnight function. Regulators come in single and manifoldable designs, and adjustable lubricators provide micro-mist lubrication.

Tente Casters, Inc.    Hebron, KY 41048
Jan 02, 2007 Available in wheel sizes from 4 x 2 in. to 8 x 2 in., 3280 Industrial Series offers load capacities up to 1,000 lb. Wheels are made of polyamide with rubber tread, polypropylene with PUR injected tread, or solid polypropylene. Custom casters are also available.