Caliper Life Sciences, Inc.    Hopkinton, MA 01748
Jan 09, 2008 Zephyr SPE Workstation automates Solid Phase Extraction (SPE) analysis by amplifying chemical analyte isolation increasing sample throughput. Unit is suitable for applications including drug abuse screening, and drug metabolism testing, contract research screening and forensic sample screening. Features include 96-well plate format and clog detection ensuring sample reliability.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Jan 09, 2008 Designed for processing structural fiberglass-reinforced composite materials, 66 x 60 in. cabinet is fitted with 8 suction-blast guns mounted on adjustable telescoping brackets. Each gun can be locked in fixed position at offset and angle to direct blast stream at portion of target surface. With blast patterns of multiple guns overlapped, solution provides uniform 360° coverage of workpiece. Entry and exit side of finishing enclosure have rubber-flapped vestibule to isolate blasting process.

Material Flow & Conveyor Systems    Donald, OR 97020
Jan 09, 2008 Strong enough to handle heavy loads, yet light enough to be set up by one person, Collapsible Wire Containers feature electro-galvanized finish and are stackable up to 4 units high with closed foot design that provides stability. Built-in drop gate facilitates loading and unloading, while latching system prevents gate from opening accidentally.

E-Z Hook, Div. of Tektest, Inc.    Arcadia, CA 91066
Jan 09, 2008 Available with various lead or cable interface options, XB insulation-piercing wire clamp features thumbscrew that locks down bed of nails and V-Groove that centers wire in order to provide optimal stability. Interior brass housing holds 34 heat-treated steel needles, and chemical-resistant nylon exterior housing limits exposure of metal parts when engaged. Clamp accepts max wire diameter of .150 in. and is available in black, red, and yellow.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 09, 2008 Suited for applications where minimal protrusion is required, Metric Size Steel and Stainless Steel Folding Handles are retained by spring-loaded detent pin in both protruding and folded positions. Steel versions have handle assembly made of steel with chrome-plated finish, and washers and hex nuts are zinc-plated blue passivated steel. Stainless steel versions have handles of American Standard 303 series stainless steel, with 304 series stainless steel used for washers and hex nuts.

Schunk    Morrisville, NC 27560
Jan 09, 2008 Driven by brushless servo motor, PEH Series servo-electric 2-finger parallel grippers come with integrated controller that enables programming, pre-configuration, and commissioning. With maximum stroke of 100 mm/finger for PEH 50, they are suited for large parts spectrum, ranging from small components to large workpieces. Gripping force can be adapted to broad application spectrum, and is as high as 1,400 N for PEH 50, with maximum finger lengths of up to 250 mm.

Bergquist Co.    Chanhassen, MN 55317
Jan 08, 2008 Two-component Gap Filler 1500 is silicone based liquid solution suitable for filling unique and intricate air voids and gaps in applications requiring thermally conductive vibration dampening. High shear thinning characteristics support optimized control during dispensing, which can be manual or automatic. Providing 1.8 W/m-K thermal performance, material is dry when cured. It is available in 50 cc and 400 cc cartridges as well as 1200 cc and 10 gal kits.

Advance Lifts, Inc.    St. Charles, IL 60174
Jan 08, 2008 Once placed on concrete, lagged down, and plugged into electrical power source, Model 6568 provides instant top-of-ground dock lift. Unit is equipped with self-contained 5 hp power unit and 6 x 8 ft platform, providing lifting capacity of 5,500 lb. It is suited for locations that do not have dock area.

Haydon Switch & Instrument, Inc.    Waterbury, CT 06705 3910
Jan 07, 2008 Using precision leadscrew assembly to provide controlled positioning along axis of linear slide, Linear Rail Systems consist of stationary base with load bearing cartridge that travels along custom-extruded, wear-resistant aluminum rail. They use size 17 hybrid external linear actuator or optional size 17 hybrid double stack external linear actuator integrated into slide. Designed to metric global engineering standards, systems include T slots to accommodate various mounting options.

AirLoc Products    Franklin, MA 02038
Jan 07, 2008 Type PRS and PRSK Jacmount® levelers meet precise positioning requirements and vibration isolation of fully automated equipment, such as injection molding; grinding and milling; and cutting and piercing machines. Ruggedly designed units feature adjustable load plate that will not come apart during installation or relocation of machinery. Integrated components are interlocking and well suited for applications with high horizontal forces.

Physik Instrumente (PI)    Auburn, MA 01501
Jan 07, 2008 Available in 6 closed loop and open loop models for mirrors up to 50 mm dia, S-330 platforms provide precise angular tip/tilt motion of top platform around 2 orthogonal axes. Flexure-guided, piezoelectrically driven systems feature optical beam deflection to 20 mrad and greater than 3 kHz resonant frequency for sub-millisecond step response. Single pivot-point design prevents drawback of polarization rotation, which is common with 2-axis stacked systems.

ACI Hoist & Crane, Inc.    Fort Lauderdale, FL 33316
Jan 07, 2008 Operating from any standard 110-120 Vac power outlet, Mechanics Hoist(TM) is available in ¼, ½, and 1 ton capacities. Unit combines regenerative and mechanical braking, ensuring safe operation under full load. Applications include boat docks, auto body shops, manufacturing facilities, warehouses, and material handling facilities.

Schunk    Morrisville, NC 27560
Jan 04, 2008 Intended for use in clean to slightly dirty environments, JGP parallel grippers are available in sizes 64-160. Compact, universal grippers include oval pistons, wedge-hook kinematics, and sturdy T-slot guidance, enabling them to achieve gripping forces of 56.2-537.3 lbf at weight of 0.6-7.3 lb, depending on size. Stroke ranges from 0.24-0.63 in./finger. Recommended workpiece weights are 2.8-18.1 lb in standard cases.

Eriez Magnetics    Erie, PA 16506
Jan 04, 2008 Able to transfer steel and iron without use of slings, hooks, or cables, SafeHold® EPL Series turns on and off manually to provide smooth operation for lifting and positioning applications in machine shops. Electricity is not needed, so power failures will not interrupt operation, and products will not cause surface marring. Series offers continuous magnet power until turned off, and several magnets can be combined to conform to shape and weight of complex workpieces.

Konecranes Americas, Inc.    Springfield, OH 45502
Jan 03, 2008 Manufactured for industrial 1- and 2-ton lifting applications where smooth, trouble-free performance is required, CXT1® maximizes use of existing building space and hoist lift. Large-diameter drum and true lift reeving promote cable life and load positioning accuracy. Lifting motor comes with class-F insulation, 60% effective-duty rating, heavy-duty DC hoist brake, and 2-speed operation of hoist and trolley. Unit offers 6:1 hoist motor speed ratio and near true vertical lift.

O.BERK Co.    Union, NJ 07083
Dec 31, 2007 Made of polypropylene, Low-Profile Jars are offered in 1, 2, 3, and 4 oz sizes with 70 mm neck finishes. Jars are suited for cosmetic, personal care, healthcare, and cosmeceutical products including creams, lotions, bath gels, scrubs, and body smoothers. Frosting, custom colors, and other decorating features are optional.

Carlton Industries    La Grange, TX 78945
Dec 27, 2007 Able to be installed in seconds (both openings in less than 30 sec), Universal Drum Lock secures around lip and has no contact with chemicals. Reusable design allows access to drum contents as needed, and non-sparking metal construction has melting temperature lower than steel. Containing devices for both openings of one standard metal or plastic 55 gallon drum, each set accommodates tags and locks through locking pen for safety and security.

Durham Manufacturing Company, The    Durham, CT 06422-2108
Dec 27, 2007 Featuring all-welded, steel construction, modular literature racks come in models with 45, 30, 15, 12, or 9 openings that measure 11 5/8 x 11 x 3 in. and offer space beneath for identifying labels. All models measure 11 11/16 x 33 13/16 in. but range from 10 13/16-53 ¼ in. tall. They can be stacked vertically using mounting holes and provided hardware, and rubber feet are furnished for desktop mounting. Optional base raises units 3 1/8 in. off surface for floor mounting.

Thomas & Betts Corp.    Memphis, TN 38125
Dec 24, 2007 Supplying grounding for coaxial, telephone drop wire runs and other grounding needs, Blackburn Intersystem Bonding Termination Meter Box Ground Clamp is available in 2 sizes with adjustable ranges from 7-10¼ in. and 11½-15¼ in. Two-piece clamp can mount vertically on side or horizontally across top of any meter box in service. Steel clamp brackets are mechanically galvanized to ASTM B695 with stainless steel hardware for corrosion resistance.

Spraying Systems Co.    Wheaton, IL 60189
Dec 21, 2007 Designed for applying heated viscous coatings, AccuCoat® Heated Spray System uses closed-loop temperature control to maintain liquid temperature and eliminate waste caused by coatings that are too warm or too cool. Controller monitors multiple temperature sensors, making automatic adjustments as needed; automatically adjusts for line speed changes; and allows multiple batch modes to be preset. Liquid lines and spray nozzles are fully jacketed; air lines can be heated if required.