Bobcat Company    West Fargo, ND 58078
Jan 14, 2008 Available for use only on Bobcat 316 compact excavator, Model HB280 meets 60 ft-lb impact energy class, has CIMA rating of 59 ft-lb, and provides 1,120-1,290 blows/min through hydraulic flow of 3.4-6.1 gpm. Approved for use on large-frame loaders and 442 ZTS excavator, Model HB2380 meets 1,000 ft-lb impact energy class, has CIMA rating of 700 ft-lb, and offers 600-950 blows/min through hydraulic flow of 19.8-33 gpm. Units have internal design with few moving parts.

Microflex Corporation    Reno, NV 89533
Jan 14, 2008 Cuff First(TM) glove dispensing unit comes packed with either 20 Supreno® SE (standard exam) gloves or 10 Supreno® EC (extended cuff) gloves. Optionally available clips and holsters securely fit dispensing unit to belts, cots, or visors, and clips can be mounted to any surface for minimizing storage space.

DJ Products, Inc.    Little Falls, MN 56345
Jan 11, 2008 Suited for manufacturing, distribution, hospital, and office environments, WagonCaddy can haul loads up to 2,500 lb and can push or pull other equipment up to 10,000 lb. Variable speed twist grips allow operator to travel at speeds of 0-3 mph forward or backward and 36 V motor is powered by 3 x 12 V batteries. Options include rotating electric scissors lift, push pad, and pintle hitch for pushing or pulling other heavy carts or equipment.

Shelving, Inc.    Auburn Hills,, MI 48326
Jan 11, 2008 Record storage units help prepare for upcoming 07-08 file clean-up at end of fiscal year by organizing and archiving numerous documents that accumulate over life of business. Two versions are available: one which uses particle board decking to support archive boxes, and all-steel unit. Each storage unit is expandable and designed to incorporate standard archive box size of 16½ x 2½ x 10½ in. Tee post design allows new units to be snapped into place as storage needs change.

Aerotech, Inc.    Pittsburgh, PA 15238
Jan 11, 2008 Available in 3 models with tabletop diameters of 100, 150, and 200 mm, ABRT series rotary stages provide up to 70 kg load capacity with bidirectional repeatability to less than 1 arc-sec and calibrated angular accuracy to ±2 arc-sec. Manufactured from aluminum, they include assortment of mounting holes, T slots, and connector block for motor power and feedback connectors. Units are suited for high throughput manufacturing and inspection applications.

Herkules Equipment Corp.    Walled Lake, MI 48390 1662
Jan 10, 2008 Designed for positioning carts, 100% air-operated Lift Systems feature 1:1 lift ratio, eliminating stress on lifts' scissors, minimizing maintenance and downtime. Built to customer specifications, units accommodate low-clearance carts and provide wide range of ergonomically correct worker heights.

Metallized Carbon Corp.    Ossining, NY 10562
Jan 10, 2008 Metcar grades M-161 and M-162 mechanical carbon/graphite Babbit impregnated materials are suited for lubricating in submerged low viscosity fluids such as water and fuels. For dry environments, self-lubricating materials provide oil-free lubrication at high temperatures. Materials are utilized for moderate loads at medium and high speeds and bearings manufactured from them are low in friction and will not score mating shaft.

Portec, Inc., Flomaster Div.    Canon City, CO 81215
Jan 10, 2008 SB Merge is high-speed, low-angle induction conveyor with positive drive that pulls rather than pushes to keep product oriented. Designed for easy maintenance and reliability, conveyor has low profile for limited space and its dimensions can be custom-sized to fit most applications. It is available in 20°, 30°, and 45° angles.

Applied Robotics, Inc.    Glenville, NY 12302
Jan 10, 2008 Smart Gripper(TM) 2.1 intelligent closed-loop direct-drive gripper features built-in controller, encoder, and programming interface. Utilizing universal operating platform and closed-loop encoder-based positioning of robotic fingers, it is operated using 24 Vdc discrete signals. Motions are preprogrammed into non-volatile memory. Up to 32 programs can be selected using 5 discrete input lines and system can provide status back to robot controller via 3 discrete output lines.

Asymtek    Carlsbad, CA 92008
Jan 10, 2008 With 750 mm/sec speed and 1 g peak acceleration, Select Coat® SL-940E accommodates product sizes up to 500 mm. Welded 1-piece structure of frame enables high acceleration and velocity with up to 2.5 kg payload, while rotary encoders ensure positional accuracy for precise coating operations. Conformal coating system has dispensing area of 19.7 x 18.7 in. which enables flexibility during production to add multiple board arrays or to coat large substrates.

Schunk    Morrisville, NC 27560
Jan 10, 2008 Offered in sizes 80 and 160, EGN Series electric 2-finger parallel grippers have stroke/finger of 8 and 16 mm, respectively. Designed for high payloads, they feature gripping forces of up to 1,000 N, multi-tooth guide, wedge-hook kinematics, and integrated Bluetooth interface. Unit is controlled by MCS external controller which is used for standardized control of all servo-electric components from SCHUNK, and facilitates programming, pre-configuration, and commissioning.

Dorner Mfg. Corp.    Hartland, WI 53029 0020
Jan 10, 2008 Equipped with completely contained belt, Series 5200 QWIK Conveyor ensures worker safety by eliminating catenary sag and reducing pinch points of belt as it moves around pulley and along frame. UHMW plastic hold-down strips contain belt by wrapping around ends of conveyor, reducing chances of getting finger caught during operation. Suited for variety of industrial, automation, and packaging applications, conveyor comes in straights, curves, and cleats.

Steinmeyer Inc.    Bedford, MA 01730
Jan 09, 2008 Manufactured from anodized aluminum, model KT 310 - 210 - DC incorporates preloaded cross roller bearings, precision ground ball screws, limit switches, and dc motors with rotary encoders in 310 x 310 x 80 mm package. Travel in both axes is 200 mm, positioning accuracy is 5 µm, straightness/flatness is 3 µm, and repeatability is ±1 µm. With optional linear encoders, repeatability is ±0.1 µm. Motors, encoders, and cabling are all located inside table body.

Vergason Technology, Inc.    Van Etten, NY 14889
Jan 09, 2008 Designed for keeping synchronous pace with medium- to high-volume injection molding operations, Press Side® 3500 (PS3500) Rapid-Cycle Metalizing System is available with any combination of sputtering, thermal evaporation, or CatArc® cathodic arc deposition sources. It is capable of sub 4 minute cycle times for physical vapor deposition processes on plastic substrates and integrates data logging industrial PC. Modular design enables custom configurations.

Caliper Life Sciences, Inc.    Hopkinton, MA 01748
Jan 09, 2008 Zephyr SPE Workstation automates Solid Phase Extraction (SPE) analysis by amplifying chemical analyte isolation increasing sample throughput. Unit is suitable for applications including drug abuse screening, and drug metabolism testing, contract research screening and forensic sample screening. Features include 96-well plate format and clog detection ensuring sample reliability.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Jan 09, 2008 Designed for processing structural fiberglass-reinforced composite materials, 66 x 60 in. cabinet is fitted with 8 suction-blast guns mounted on adjustable telescoping brackets. Each gun can be locked in fixed position at offset and angle to direct blast stream at portion of target surface. With blast patterns of multiple guns overlapped, solution provides uniform 360° coverage of workpiece. Entry and exit side of finishing enclosure have rubber-flapped vestibule to isolate blasting process.

Material Flow & Conveyor Systems    Donald, OR 97020
Jan 09, 2008 Strong enough to handle heavy loads, yet light enough to be set up by one person, Collapsible Wire Containers feature electro-galvanized finish and are stackable up to 4 units high with closed foot design that provides stability. Built-in drop gate facilitates loading and unloading, while latching system prevents gate from opening accidentally.

E-Z Hook, Div. of Tektest, Inc.    Arcadia, CA 91066
Jan 09, 2008 Available with various lead or cable interface options, XB insulation-piercing wire clamp features thumbscrew that locks down bed of nails and V-Groove that centers wire in order to provide optimal stability. Interior brass housing holds 34 heat-treated steel needles, and chemical-resistant nylon exterior housing limits exposure of metal parts when engaged. Clamp accepts max wire diameter of .150 in. and is available in black, red, and yellow.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 09, 2008 Suited for applications where minimal protrusion is required, Metric Size Steel and Stainless Steel Folding Handles are retained by spring-loaded detent pin in both protruding and folded positions. Steel versions have handle assembly made of steel with chrome-plated finish, and washers and hex nuts are zinc-plated blue passivated steel. Stainless steel versions have handles of American Standard 303 series stainless steel, with 304 series stainless steel used for washers and hex nuts.

Schunk    Morrisville, NC 27560
Jan 09, 2008 Driven by brushless servo motor, PEH Series servo-electric 2-finger parallel grippers come with integrated controller that enables programming, pre-configuration, and commissioning. With maximum stroke of 100 mm/finger for PEH 50, they are suited for large parts spectrum, ranging from small components to large workpieces. Gripping force can be adapted to broad application spectrum, and is as high as 1,400 N for PEH 50, with maximum finger lengths of up to 250 mm.