Komatsu America Corp.    Rolling Meadows, IL 60008
Mar 21, 2008 Powered by 84 hp Komatsu engine, Model SK1026 features 2,650, 5,300, and 5,400 lb of rated operating capacity, tipping load, and bucket breakout force, respectively. Equipped with Automatic Power Control (APC) and standard 2-speed transmission, 4 ton skid steer loader comes with high flow hydraulic system that helps increase available oil flow for attachments from 21-34 gpm and auxiliary hydraulic circuit with maximum flow of 21.0 gpm.

Michigan Manufacturing Service, Inc.    Wixom, MI 48393
Mar 20, 2008 Suited for metalworking and metalforming operations, Jet Pack Automotive Lubrication System automatically sends low-pressure spray of high-viscosity lubricant to required areas. Control system timer regulates duration of spray for each machine cycle, while controlled air logic ensures clean, fogless application, and quick disconnect design speeds nozzle changeover. Virtually maintenance free, Air Assist helps optimize tool life and minimize lubricant usage.

Safe Rack, LLC    Sumter, SC 29150
Mar 20, 2008 SafeRack G4 Gangways are constructed of aluminum parts that are stamped out in tool-and-die process, allowing reproducibility yielding accurate replacement parts that can be bolted into original product. They include 90 shared parts that fold or unfold as gangway is used. Other features include slip-resistant tread on stairs, powder-coated handrails and midrails, heavy-duty bumpers, durable springs, and 4-rail design for fall protection.

Advanced Machine & Engineering Co.    Rockford, IL 61103
Mar 20, 2008 Developed to provide power-off clamping of rods and shafts, AMLOK® Hydraulic Series RCH Rod Clamps are actuated by spring/collet mechanism and unclamped by hydraulic pressure. With ability to lock reciprocating motions only, units are designed to clamp components after motion has stopped and to hold position securely as long as forces do not exceed table values. Clamps consist of alloy steel housing containing special locking mechanism actuated by set of disc springs.

Telect Inc.    Liberty Lake, WA 99019
Mar 20, 2008 Supplied in kit that enables assembly of 4 ft high system, Knock-Down Channel Rack offers weight capacity of 500 lb. It includes 2-post assembly with steel base and aluminum uprights. Extension kit, comprised of 1 and 2 ft channel extensions, link plates, and required hardware, can increase rack height to 5, 6, or 7 ft. Vertical rails, cross bars, and bases bolt together for assembly.

Bimba Manufacturing Co.    Monee, IL 60449 0068
Mar 19, 2008 Designed to facilitate machine changeovers, EFP Extruded Flat MultiPosition Cylinder provides 3 positions in one package, while EFQ Extruded Flat MultiForce Cylinder features 2-piston design that eliminates need for higher pressure systems or unique configurations. To save air volume, only one piston is pressurized on return stroke. Both double-acting, single rod end cylinders can connect to and operate application's pneumatic logic.

SmartMove(R) Conveyors    Fall River, MA 02720
Mar 18, 2008 Available in belt widths from 12-24 in., All-in-One Wave Exit Conveyor features full ribbed belting, which transfers 450 degree circuit boards. Gradient Cooler uses 130 cfm of ambient airflow parallel to belt travel for stress relieved cooling. Holding zone utilizes brush belting formulated of non-abrasive Polypropylene with ESD and Teflon® additives. Molded to belting in varying height scheme, thin bristles provide minimal surface contact with transferring boards.

PermaFlex Engineering    Orange, MA 01364
Mar 18, 2008 Configured vertically or horizontally, AccuNip® Nip Stations with aluminum frames offer nip loads up to 2,000 lb, while cast iron and steel frame units produce up to 25,000 lb of nip load. Stations can be customized with doctor blades, dual-roll gear drives, heating or cooling rolls, and adjustable nip pressures and gaps. Light- and medium-duty models are suited for laminating, thermal bonding, web heating/cooling, and web pulling or squeezing.

GaleWrap    Douglasville, GA 30134
Mar 18, 2008 Offering alternative to conventional hand wrapping, Model GW-3500(TM) combines pallet wrapper and pallet jack in one unit that runs at 11 rpm and can handle 70 in. diagonal loads. System includes manually adjustable film tension, up/down wrapping cycles, independent top and bottom wrap pattern selection from 1-9 wraps, and splash-proof wrapping mode. Minimizing wasted film and worker injuries, pallet wrapper prevents failures by securely wrapping each load.

Schleuniger, Inc.    Manchester, NH 03103
Mar 18, 2008 Designed for use with automatic Cut Strip Terminate machines, PreFeeder 60 features controlled roller drive that feeds wire into accumulator to reduce tension before it is pulled by feeding mechanism. Wire line height can be adjusted, and wire end detection sensor is optionally available. PreFeeder 60 helps maximize productivity of processing machine, especially when it comes to wire packaging that might be problematic such as wire barrels, loose wires, and cardboard boxes.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Mar 18, 2008 PowerLift® Rare Earth Lift Magnets incorporate handle with positive lock-on and lock-off mechanism that requires operator to manually switch between those 2 states. This prevents false sense of security derived from incomplete handle turn and also indicates if mechanism is accidentally bumped to off position. Used on 220-6,600 lb flat or 110-3,300 lb round non-flexing surfaces, these permanent magnets have on/off functionality but do not require any electricity.

Esco Micro Pte Ltd    Singapore 486777  China
Mar 18, 2008 Labculture Class II Biological Safety Cabinet features tri-wall construction that surrounds work zone with negative pressure plenums to ensure safety. It comes with single piece stainless steel work tray, narrow profile front grille, lower drain pan with angled sides, single-piece work zone liner, angled front, raised armrest, and frameless sash. Available for 230 Vac 50 Hz electrical operation, low noise unit comes in sizes of 0.9, 1.2, 1.5, and 1.8 m.

Anver Corp. - Anver.Com    Hudson, MA 01749
Mar 14, 2008 Offered in 2-15 mm dia sizes in 0.5 mm increments, Miniature Vacuum Suction Cups are suitable for handling fine objects. Materials include heat-resistant FDA-approved silicone, non-marking silicone-free Nomathane(TM), general-purpose nitriles, abrasion-resistant polyurethane blends, and anti-static ESD silicone for electronics. Designed for use with push-in, flanged, or barbed fittings, cups target pick-and-place systems, micro-electronics assembly, and packaging equipment.

North Safety Products, Inc.    Cranston, RI 02920
Mar 14, 2008 With 3-stage Portable Filtration Panels, users can convert shop air used for pneumatic tools and equipment into breathable clean air. Panels purify compressed air by removing oil, water, and particulate contaminants. Carbon monoxide monitor activates audible and visual alarms when CO concentration exceeds 5 ppm in Canada and 10 ppm in U.S. Panels are suited for painting, asbestos abatement, cleaning, maintenance, sandblasting, construction, and municipal applications.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)    Buffalo, NY 14206-2665
Mar 14, 2008 With ability to clamp to the grating without penetrating steel or supporting members, GrateFix is designed to secure steel, aluminum, or fiberglass grating. Featuring corrosion-resistant, galvanized finish, Model GF1 G10 ASSY is offered with stepped malleable iron body, 3/8 in. dia screw, and saddle clip. Including 5/16 in. dia screw, Model GF1 S08 ASSY is constructed of 316 SS, while Model GF3 S08 ASSY is constructed of 304 SS.

Jungheinrich Lift Truck Corp.    Houston, TX 77043
Mar 14, 2008 Featuring 24 V, 3-phase AC-drive technology, Model EKS 110 enables operators to pick stocked items from 1st, 2nd, or 3rd level of racking. Truck offers lifting capacity of 2,200 lb, and can pick up pallets or crates both longitudinally and crosswise. With L version, platform and load section can be raised up to 118 in. allowing items to be picked from heights up to 15 ft. Auxiliary lift, or Z version, allows forks to be positioned at ergonomically correct height for operator.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Mar 12, 2008 Rotationally molded of 100% polyethylene, reusable Ship Shape(TM) Bulk Container features 48 x 40 in. footprint, enabling professionals to eliminate pallets and unitize loads. Container also eliminates potential for phytosanitation contamination and supports environmental efforts to safeguard forest resources and minimize landfilling of failed pallets. Providing lift truck access from 2 sides, container is weatherproof and impervious to chemical attack, rust, and corrosion.

North Safety Products, Inc.    Cranston, RI 02920
Mar 12, 2008 Featuring mechanism that provides one ear plug at-a-time, single plug dispenser works with DeciDamp2 and Deci4200 Earplugs. Machine is available with bucket containing 500 pairs of ear plugs as well as wall mount. Table stand is optional.

Hardigg Industries, Inc.    South Deerfield, MA 01373
Mar 12, 2008 Measuring less than 24 in. wide, SuperMAC(TM) enables 2 cases to fit side-by-side in most military vehicles. Unit includes Comfort Grip Handles(TM), molded-in lid hangers, and molded-in rib design for secure stacking and interlock. Available with removable rack that allows full access to equipment, SuperMAC is suited for field-deployed equipment and sheltered applications that require medium-duty shock and vibration protection. Lock N Load(TM) latch system locks racks securely into place for transit.

Hardigg Industries, Inc.    South Deerfield, MA 01373
Mar 12, 2008 Offering light to medium duty protection, BlackBox(TM) is suited for field-deployed and sheltered applications up to 100 lb. Case uses recycled materials in shell and steel frame for equipment mounting. Measuring 24 in. deep, unit features one 2 in. front lid, one 5 in. rear lid with edge casters, molded-in rib design for secure stacking, and automatic pressure relief valve. BlackBox meets ANSI/EIA 310-C standards for universal rack mounting and exceeds ATA's Spec 300, Cat 1 requirements.