Material Handling & Storage

Material Handling & Storage

Precision Vises provide repeatable clamping to .0002 in.

January 23, 2002

DoubleLock Vises offer 80,000 PSI ductile iron body and steel components. Self-adjusting over entire clamping range, they may be converted to single station configuration. Three models are available: DL430 (3 x 4 in. each station), DL640 (4 x 6 in. each station), and DL800 (6 x 8 in. each station). Jaw options include InnerLock(TM) and standard vise jaw plates. Three hydraulic models are also... Read More

Material Handling & Storage

Drum Discharging System includes volumetric feeder.

January 23, 2002

Lift & Seal System(TM) lifts and discharges product from drums loaded at floor level. Unit provides dust-tight seal to prevent product loss or contamination, while safety caging protects employees and equipment. Volumetric feeder delivers material at adjustable rates. System is available for any size or weight container with discharge heights up to 35 ft. Read More

Material Handling & Storage

Linear Motion Slide features toothed belt drive.

January 22, 2002

STAR Linear Motion Slide has steel-reinforced, polyurethane belt drive system for speeds up to 5 meters/sec with repeatability of ±0.1 mm. It is guided by 4 Super Linear Bushings that run on 2 hardened steel shafts. Slide is available with accessories such as mechanical switches, proximity switches, cable duct and wiring socket. Read More

Material Handling & Storage

Tool Cabinets form core of machining centers.

January 22, 2002

Tool storage cabinets and transporters are equipped with tool holder frames and tool holders to accommodate variety of standard-sized NC tools. Cabinet drawers and roll-out trays have 440 lb load capacity, while transporters have rigid steel frame and steel sheet side panels slotted at 1-in. intervals to accommodate trays, frames, shelves and other accessories. Fully loaded transporters and... Read More

Material Handling & Storage

Isolation Pads protect floors and reduce noise.

January 22, 2002

Series 400, 700 and 900 vibration control pads are offered in variety of configurations such as low frequency, high damping, high loading, level stability, and high coefficient of friction. Available from 2 to 25 mm thick with smooth or non-skid profiles, pads measure 500 x 1000 mm and handle up to 100 tons. They can be cut to fit special applications and combined with free-standing leveling... Read More

Material Handling & Storage, Packaging Products & Equipment

Floor Pads reduce noise and vibration.

January 21, 2002

Nomad padding is available for floor and counter units, in 1/2 and 1 in. thicknesses. Pad material is resilient and will not lose its shape or deteriorate when heavy equipment is placed on it. It uses coated vinyl loop construction called that absorbs sound and vibration. It is resistant to fungus, mildew, acids, and organic solvents and will withstand bleach and other chemical bases such as... Read More

Material Handling & Storage

Cable Carriers can be used on variety of machinery.

January 21, 2002

E2 E-Chain mid-size cable carriers guide and protect moving cables and hoses up to 1.5 in. OD and travels up to 150 ft. They have large pivot points, strong side links, snap-open crossbars, and many accessory components. Applications include machine tools, material handling, and packaging and assembly. Read More

Material Handling & Storage, Mechanical Components and Assemblies

Slide incorporates ball-bearing system.

January 17, 2002

Magnetically-coupled High Load Ultran Slide provides high-load carrying capability within Ultran Slide rodless cylinder. Bore sizes are 1 1/16, 1 1/4 and 1 1/2 in. Prelubricated unit provides maintenance-free, leak-free travel. Transition Plates couple rodless cylinders to Linear Thrusters to create multi-axis configurations. Options include stroke adjustment, bumpers, seals for low-pressure... Read More

Material Handling & Storage

Filter and Lubricator come with NPT or BSPP threads.

January 17, 2002

Hi-Flow PL602 Series Filter offers flow rates up to 380 SCFM, providing excellent water removal efficiency. It includes 32 oz metal bowl with twist drain, and is available in 1, 1-1/4 and 1-1/2 in. port sizes. PL606 Series Lubricator provides proportional oil delivery and has choice of 32 or 64 oz bowls that can be filled while under pressure. It is available in 1, 1-1/4 and 1-1/2 in. port sizes,... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

FRL Units are constructed of stainless steel.

January 17, 2002

Prep-Air® II units include filters, coalescing filters, regulators, piggybacks and lubricators. They are available in 2 basic body sizes: 3/8 in. body with 1/2 in. ports and miniature 1/8 in. body with 1/4 in. ports, with either NPT or BSPP threads. Individual units can be piped together using stainless steel pipe nipples. All units meet NACE specifications. Read More

Material Handling & Storage

Collapsible Container uses warehouse space efficiently.

January 17, 2002

Reusable ROPAK 3230, with 32 x 30 in. footprint, folds to one-third of its assembled height. Container is available in 25 and 34 in. heights, with choice of standard, 4-way or conveyable, 2-way fork-entry base. Weight capacity of 2,000 lb makes it suitable for high-density small to medium-size parts such as automotive components, bearings, hardware, metal parts, plastic and rubber, stampings,... Read More

Material Handling & Storage

Cable Blowing Machine quickly installs cable into ducts.

January 17, 2002

Incorporating aluminum air box and cable pusher, machine uses compressed air to install cable. Hydraulically-powered, belt-driven system controls 0.23 to 1.25 in. diameter fiber-optic cable, as compressed air propels it into duct at speeds up to 300 ft/min. Monitoring system provides readouts of speed and distance, protects against dust obstructions, and has emergency stop. Tubular-steel frame... Read More

Material Handling & Storage

Hoist Ring lifts from any direction.

January 17, 2002

Side-pull hoist ring pivots 180 degrees, swivels 360 degrees, and is suitable for side mounting and for loads that need to be lifted and turned over. Alloy-steel ring can be used for stamping and injection molding machines, tooling fixtures, and containers. Read More

Material Handling & Storage

Mini Slides provide precision in handling and assembly.

January 17, 2002

SLF low profile slides employ integral, parallel pneumatic actuator and double-row cage ball bearings. They are available with 6, 10 and 16mm bore sizes, and stroke range of 10 to 30mm, 10 to 50mm and 10 to 80mm, respectively. SLS slides can be installed in tight spaces, due to narrow design and centerline thrust configuration. Twin piston style SLT slides utilize inline, double-row ball bearings... Read More

Material Handling & Storage

Stopper Cylinders manage conveyor workflow.

January 17, 2002

STA Series stops carriers, pallets, or packages containing workpieces. They are available in three models and 16 configurations, including: trunnion rod that stops workpiece carriers weighing up to 330 lb by protruding rod directly into path of carrier; roller style cylinder with piston rod that can stop carrier or allow it to roll at controlled speed; and toggle lever style that can stop load up... Read More

Material Handling & Storage

Pallet Forks prevent damage.

January 17, 2002

Heavy-duty, steel pallet forks are recessed to prevent damage to pallets, boxes, and other bulky materials. Adjustable forks allow operators to adjust spacing between fork tines from 9 to 45 inches. Load-rating capacity is 4,700 lbs at 24 inches. Guard plate prevents objects from sliding off, while maintaining visibility. Universal mounting system offers quick attachment to old and new generation... Read More

Material Handling & Storage

Aluminum Framing can be assembled quickly.

January 14, 2002

Only rubber mallet is require to assemble Quick Frame tubular aluminum framing system. Boltless structural system is lightweight, easy to use, quick to assemble, and available with different mounting choices and accessories. Applications include acoustic enclosures, light duty shelving, display cases, safety guards and conveyor covers. Read More

Material Handling & Storage

Fork Extensions are available with retainers.

January 11, 2002

Fork Extensions with Push Block Spacer are designed to make loading pallets on back of truck quicker and more convenient. They are available in lengths of 48, 54, 60, 72, 84, and 96 in. Extensions accommodate existing fork widths of 4, 5, and 6 in. that are up to 2 in. thick. Block allows pallets to be pushed 2 or 3 deep into truck. Read More

Material Handling & Storage

Storage Racks are available in two versions.

January 11, 2002

Husky Invincible Storage® Rack Beams are available for light duty and high capacity applications. Beams are available in 2-6 in. heights in nine standard clear span lengths from 48 to 144 in. long. The 2-1/2 and 3 in. beams are suitable for hand loaded rack applications; 6 in. beams handle higher capacity storage requirements. All beam sizes meet RMI standards. Beams are fabricated from high... Read More

HVAC, Material Handling & Storage

Rotary Air Compressor reduces energy consumption.

January 11, 2002

Compressor's hybrid permanent magneto HPM synchronous motor features independent coil modules that can be removed and serviced. HPM motor directly drives compressor, eliminating need for motor bearings, gears, pulleys, belts, couplings, or motor shaft seals. With fewer components to wear out, leak or get out of alignment, compressor offers increased reliability and simple maintenance. Read More