HVAC

HVAC

Future Electronics Promotes Harsh Environment AC and DC Fans from Orion Fans

April 5, 2016

Pointe Claire, Quebec - Future Electronics, a global leading distributor of electronic components, recently announced immediate shipping availability of harsh environment AC and DC fans from Orion Fans. Orion Fans' harsh environment AC fans, DC fans, filter fan kits and accessories are designed and tested to perform in the toughest conditions and protect against dust, moisture, salt fog, salt... Read More

HVAC, Machinery & Machining Tools, Test & Measuring Instruments

Mechanical Refrigeration System provides subambient control.

April 4, 2016

ACS-2 Air Chiller System provides subambient temperature control for mechanical and rheological testing. Paired with Q800 DMA, Discovery Hybrid Rheometer, ARES-G2 Rheometer, or RSA-G2 Solids Analyzer, unit provides reliable temperature control as low as -55°C without use of liquid nitrogen. System can also be used to decrease cool-down time between experiments; typical reduction of total... Read More

HVAC

Air Filtration Systems aid laser materials processing.

April 4, 2016

Featuring 4-stage filtration, UAC 2000 and UAC 4000 extract particulates and fumes produced during laser system materials processing. Multi-sensor design continuously monitors performance at all stages, and variable speed exhaust blowers maintain constant airflow as particulate is captured in pre-filter and HEPA filter. Third and fourth filtration stages capture fumes in dual-carbon filter,... Read More

Controls & Controllers, HVAC

Integrated Temperature Control System meets NFPA 79 standards.

April 1, 2016

Combining circulating water system and Iceman chiller, Full Range provides heating and chilling from one self-supporting unit. Solution is available with heating capacities up to 96 kW, pumping capacities up to 120 gpm, chilling capacity up to 40 tons, and temperature range of -20 to +300°F. Along with stainless steel centrifugal pumps, standard features include brazed plate... Read More

Electronic Components & Devices, HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Temperature Sensors enable readings up to 20 in. away from IC.

April 1, 2016

Used for monitoring 2–4 channels, MCP990X System Management Bus (SMBus) temp sensor ICs exhibit ±1°C max accuracy over -40 to +65°C. Remote diode temperature measurement with resistance error correction compensates for voltage drops from connectors and long board traces, while sample-frequency hopping filter minimizes injected system noise from components. Package options include... Read More

HVAC

Efficiency-Optimized Heat Pump utilizes modulating technology.

April 1, 2016

By adjusting heating and cooling levels up or down, Champion® LX Series 16 SEER/9.0 HSPF heat pump provides only what is needed to condition space. This reduces noise and promotes efficient operation without over-cooling space. In colder weather, demand defrost feature minimizes heat pump operation. Other features include powder painted steel coil guards; balanced, direct-drive fan design;... Read More

HVAC

Direct Drive Plenum Supply Fans include make-up air models.

March 29, 2016

DGX-22-OpenGreenheck make-up air Models DGX and MSX can be configured with direct drive, backward-curved plenum supply fan. Both models offer operating range capable of 800–25,000 cfm and external static pressure up to 4 in. wg. DGX-P and MSX-P offer additional features for when applications require higher external static pressures. Along with factory-mounted VFD that provides... Read More

Architectural and Civil Engineering Products, Cleaning Products & Equipment, HVAC, Materials & Material Processing, Mining, Oil Drilling, Refining Products & Equipment

Coated Hydraulic Fracturing Sand suppresses dangerous dust.

March 28, 2016

Added to hydraulic fracturing operations' dust management systems, UNIFRAC® DUSTSHIELD™ minimizes airborne particles generated during proppant conveyance, mixing, and pumping. This non-toxic suppression system reduces overall job/well-site exposure to respirable silica dust by up to >99%. This dust suppression technology is exclusively coated on UNIFRAC northern white sand; proppant is... Read More

HVAC, Materials & Material Processing, Thermal & Heating Equipment

Inert Atmosphere Furnace operates up to 2,000°F.

March 23, 2016

Providing 36 x 60 x 36 in. workspace dimensions, No. 1039 is equipped with 73 KW ICA wire coils supported by vacuum formed ceramic fiber installed on all interior surfaces. System has roof-mounted, heat-resisting alloy circulating fan powered by 1 hp motor with V-belt drive, water-cooled bearings, and inert atmosphere shaft seal. Suitable for heat treating applications, furnace is constructed... Read More

HVAC, Thermal & Heating Equipment

Modular Mini VRF System combines efficiency and flexibility.

March 23, 2016

Supporting installation on ground, terrace/balcony, or roof, YORK® Mini variable refrigerant flow (VRF) cooling and heating system provides personalized comfort to residential or light commercial buildings with any floorplan. Modular design and flexible piping possibilities enable solution to be built room by room and floor by floor. These 3-, 4-, and 5-ton heat pumps provide VRF option... Read More

HVAC

Self-Adjusting Heat Pump promotes efficient space conditioning.

March 23, 2016

Along with balanced direct-drive fan design that minimizes vibration and sound, Coleman® LX Series 16 SEER/9.0 HSPF heat pump uses modulating technology that contributes to even temperatures and minimized operating expense. Heating/cooling provides only what is actually needed to condition space, and reduced compressor speed and airflow also improves dehumidification. In colder... Read More

Green & Clean, HVAC, Thermal & Heating Equipment

Cambridge Engineering Fosters Culture of Efficiency in Production of Energy-Saving Heating and Ventilation Solutions

March 22, 2016

Manufacturer “practices what it preaches” by adopting and promoting Lean manufacturing procedures ST. LOUIS – Cambridge Engineering, the leading manufacturer of energy efficient high temperature heating and ventilation (HTHV) direct-fired gas products for commercial spaces demonstrates its commitment to efficiency by implementing Lean manufacturing practices that seek to eliminate key... Read More

Green & Clean, HVAC, Thermal & Heating Equipment

High Temperature Fluid Generator serves multiple industries.

March 18, 2016

With 5–200 MMbtu/hr output capabilities, GENESIS® provide users with any high-temperature thermal medium – oil, glycol-water mixture, water – at desired operating pressure. Complete membraned wall furnace provides gas-tight construction, and opposed corner headers allow equal tube lengths and even thermal expansion. Design also facilitates addition of condensing heat recovery modules,... Read More

Architectural and Civil Engineering Products, HVAC, Material Handling & Storage, Materials & Material Processing, Services

Lee Contracting Installs Structures and Systems for the First Kingfa (USA) Facility

March 17, 2016

Pontiac, Mich. – Lee Industrial Contracting, Inc., a premier company in “Providing TurnKey Solutions for Plant Projects”, completed manufacturing work for the grand opening of the first North American Kingfa Scientific and Technologies Co. (USA) facility in Canton, Michigan. Headquartered in Guangzhou, China, Kingfa is a global leader of the advanced material industry producing modified... Read More

Green & Clean, HVAC, Laboratory and Research Supplies and Equipment

Water-Cooled Centrifugal Chiller has energy-saving design.

March 11, 2016

Along with 2,500–3,500 ton capacity, YORK YK-EP (Efficiency Plus) features mechanical compression economizer cycle that optimizes performance. Energy conservation is fostered by YORK OptiSpeed™ variable speed drive, which accepts medium or high voltage power, as well as ability to operate with 50°F low entering condenser water temperature (ECWT). Further energy savings can be realized... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, Green & Clean, HVAC, Material Handling & Storage

Compressed Air Filters increase performance, energy efficiency.

March 11, 2016

Available for 20–500 scfm flows, compressed air filters deliver reliable compressed air quality with minimized pressure drop to help conserve energy. Products include liquid separator, particulate, coalescing, and oil vapor adsorbing filters. While particulate and coalescing filters feature deep pleated filter elements wrapped in stainless steel cages, vapor filters use carbon matting to... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Temperature Transmitter offers non-intrusive measurement.

March 11, 2016

Available in Rosemount 648 Wireless Temperature Transmitter and Rosemount 0085 Pipe Clamp Sensor Assembly, Rosemount X-well Technology offers surface sensing temperature measurement solution that eliminates need for thermowell or process penetration when measuring process temperatures in pipe applications. Users do not have to design, size, or maintain thermowells and Wake Frequency... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

High Temperature Sensors for Harsh Environments

March 11, 2016

Locon sensors are available for a wide range of purposes, including harsh environment high temperature uses. Our sensors can be used in a wide array of practical applications, including high-pressure environments or extreme temperatures. These high-quality sensors are available in a variety of threaded sizes to fit with the needs of your application. Backed by Locon’s guarantee to provide... Read More

Controls & Controllers, Green & Clean, HVAC

Slash your Parking Garage Energy Bills by Downshifting your Exhaust Fans Using Demand Control Ventilation Systems

March 10, 2016

Having a parking garage in your apartment or commercial building is very convenient and it will make your tenants happy. At the same time it will probably drive your utility bill way up. In a large office building and/or mixed-use development, parking garage ventilation can represent 30% or greater of the property’s total annual energy bill, consuming upwards of 400,000 kilowatt hours (kWh) per... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Digital Temperature Sensor is designed for high accuracy.

March 9, 2016

Based on CMOSens® technology, STS3x offers accuracy of ±0.3°C and comes in 8-pin, 2.5 x 2.5 x 0.9 mm DFN package that fosters application integration. Functionality includes enhanced signal processing, 2 distinctive and user-selectable I²C addresses, and communication speeds up to 1 MHz. Operating from 2.4–5.5 V supply range, calibrated sensor provides linearized,... Read More