Compressed Air Dryers

Fluid & Gas Flow Equipment, Cleaning Products & Equipment

Stand-Alone Refrigeration Dryers have compact footprint.

September 2, 2014

Operating on compressed air flow rates from 12.3–159 cfm, ultra-compact KRYOSEC direct expansion refrigeration dryers provide dependable and efficient performance with minimal pressure differential. Footprint for smallest TAH models is 0.18 m², which have overall size of 386 x 473 x 440 mm. With performance made possible via heat exchanger dimensions, refrigerant liquefaction surfaces, and dedicated cooling air flow, dryers suit applications with ambient temperatures up to +50°C.

Read More

Fluid & Gas Flow Equipment

Pulse Dryer suits ultra high-purity products.

December 3, 2013

Instead of burning fuel in combustion chamber, indirectly heated Pulse Combustion Dryer employs either electric heating element or air-to-air heat exchanger to heat drying gas. Drying gas is pure air, CO2, or N2, with no combustion byproducts, and no potential for flame contact with products to be dried. Suited for high-purity and solvent-based applications, system provides gas-dynamic atomization and rapid drying with low degradation of delicate products. Read More

Fluid & Gas Flow Equipment, Green & Clean

Refrigerated Dryers have modular, high-capacity design.

July 16, 2013

Intended for large compressed air systems, water-cooled TK-TM series utilize digital scroll refrigeration technology to conserve energy. Air-side isolation valves, cooling water control valve, and cooling water isolation valves on each module allow independent service without disrupting system air flow. Service panels on top, front, and back facilitate maintenance, and flow capacities can vary from 1,250–12,500 scfm as based on combinations of 2,500 and 1,250 scfm modules. Read More

Textile Industry Products, HVAC, Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Machinery & Machining Tools, Cleaning Products & Equipment

Air Blower/Dryer comes in stand-alone and stackable versions.

April 10, 2013

Used to dry carpets, upholstery, and other surfaces, Windshear™ Storm is offered as stand-alone system for drying carpets in small to medium-sized rooms or another version that allows stacking of multiple units for increased power and performance. This 120 V, 22 x 16.5 x 11.5 in. unit runs on 2.4 A max, weighs 17.75 lb, and has rated air velocity of 3,400 fpm. Suited for disaster and restoration cleanup operations, dryer provides 0°/30°/90° airflow direction and has 24 ft power cord. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Dynamic Drying Unit features closed-loop regeneration.

September 17, 2012

In line with IPC/JEDEC-J-STD-033C standard, Model U-5002 achieves air moisture levels less than 0.5% RH, even at temperatures of 60ºC. During cabinet door opening, air moisture levels barely rise above 5% and sink within 4 min to <1%. Microprocessor and solid state sensor monitor state of desiccant and compare it with set point values. When moisture content in cabinet exceeds absorption capacity of drying substance, thermal regeneration begins. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Non-Desiccant Resin Dryer targets medical molders.

May 29, 2012

Specifically designed for processing small quantities of material up to 5 lb/hr, Model NDM-5 utilizes compressed air and proprietary membrane, instead of dusty desiccant beads, to draw moisture out of polymers. Materials can be changed by removing integral glass hopper and replacing it with spare hopper containing another material. To operate, user turns dryer on and sets temperature on microprocessor control, which is equipped with 12 ft long pendant for remote mounting. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Hopper Mounted Dryers handle low-throughput materials.

March 15, 2012

Using plant air to dry material, Hopper Mounted Compressed Air Dryers are available for process rates up to 15 lb/hr. Units provide drying temperatures from 90-350°F and can handle diverse range of conditions without cooling water or after coolers. To assure resin is properly dried, Dri-Pak membrane provides continuous stream of -49°F dew point air regardless of conditions. UDC controller is standard and can be calibrated for ISO 9000 and 9002. Read More

Fluid & Gas Flow Equipment

Refrigerant Dryers offer flow capacities from 10-5,000 cfm.

July 8, 2011

With standard pressure dew point of 37°F, RA Series offers efficient method of drying compressed air. Aluminum heat exchanger features vertical profile that allows force of gravity to result in maximum droplet separation and self-cleaning. Varioflow hot gas bypass valve, which utilizes gas charged capsule that operates independently of power or electronic support, provides user with 100% stable dew point, no maintenance, and zero freeze-ups. Read More

Fluid & Gas Flow Equipment

Refrigeration-Compressed Air Dryer prevents condensation.

December 3, 2010

Supplied in metal housing with electronic level controlled condensate drain and dew point indicator, Buran dryers refrigerate compressed air to consequently prevent condensation and corrosion damage. Aluminum heat exchanger includes functions for air to air heat exchanger, refrigerants to air heat exchanger, and water separator. Suited for industrial areas where compressed air is used to run plant, systems offer control panel for at-a-glance monitoring of operating status. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Green & Clean

Desiccant Air Dryers achieve low dew points down to -70°C.

October 22, 2010

Covering airflow rates from 1.2-13.3 m³/min, DC 12 to DC 133 Heatless Regenerated Dryers are supplied ready for use with upstream and downstream filtration. Generous volume of high-grade Sigma Dry desiccant, which saturates only in part during initial loading, helps to achieve low dew points. Two controls are available: Eco Control Basic allows flexible matching of regeneration period to varying load conditions, while Eco Control automatically adapts loading and regeneration periods to demand. Read More

Fluid & Gas Flow Equipment, Green & Clean

Refrigeration Dryer helps minimize energy consumption.

October 21, 2010

Operating with pressure differential of less than 0.19 bar, Model TF 251 provides capacity of 25 m³/min. Integrated Secotec cycling control comprises thermal mass that allows dryer's refrigerant compressor to operate at partial load for energy savings. Two operating hours counters, viewable through window in enclosure, enable user to directly track savings at any time. Available in air- and water-cooled models, unit includes condensate separation system to maintain compressed air quality. Read More

Fluid & Gas Flow Equipment, Green & Clean

Refrigeration Dryers provide 90 m³/min flow capacity.

October 20, 2010

Characterized by low pressure differential, TG and TI Series can be equipped for air or water cooling of refrigerant condenser. Control system combines refrigerant compressor with variable volume compression chamber, compressed air temperature sensors, and PLC. To save energy, consumption is directly proportional to airflow through dryer and sinks during time of reduced demand. Copper heat exchanger and condensate separator ensure that discharged air meets quality requirements of ISO 8573-1. Read More

Fluid & Gas Flow Equipment

Membrane Dryer is suited for automotive industry.

June 3, 2009

Designed for inline maintenance, AMD-035 SuperStar Membrane Dryer provides ultra-clean and ultra-dry compressed air. Dew point is lowered 20°F or more by continuously removing water vapor and venting into surrounding atmosphere, while contaminant- and particle-free air is ensured via coalescing filter integrated within pre-filtration system. Also, automatic float drain allows for discharge of moisture from Extractor/Dryer® while preventing any system air loss. Read More

Fluid & Gas Flow Equipment

Compressed Air Dryers feature explosion-proof design.

November 7, 2008

Suited for applications requiring -40°F dewpoint and flow rates up to 40 scfm, Balston 76 Series utilizes industrial membrane technology, which removes all humidity from compressed air without electrical components. Coalescing prefilters remove both liquid and solid contaminants down to 0.01 microns, providing instrument quality air downstream to critical applications in refineries, petrochemical plants, and anywhere hazardous environment exists. Read More

Fluid & Gas Flow Equipment

Air Dryers lower dewpoint without moving parts or electricity.

May 19, 2008

Suited for use in flammable and hazardous environments where explosions or fires are of concern, Balston IT Series Membrane Air Dryers produce dewpoint of 35°F and lower while removing all other compressed air contaminants down to 0.01 micron. Wall-mountable and explosion-proof units, used to dehydrate and purify compressed air, offer flow rates up to 100 scfm and are shipped with prefilters, auto drains, and membrane modules. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Dryer System delivers contaminant-free compressed air.

May 7, 2008

In conjunction with large air compressors and systems, SKF® SFD dryer system dries compressed air for pneumatic applications directly from tank. Compact device incorporates 3-in-1 system to remove oil, contaminants, and moisture, operating up to 175-200 psi. Installing on wall or directly to compressor top plate, it can be supplied for 12, 24, and 120 Vac, or fully pneumatic requiring no electrical connection. Basic flow rates up to 40 cfm can be achieved. Read More

Fluid & Gas Flow Equipment

Mini Dryer produces small volumes of dry, compressed air.

August 8, 2007

Designed for air flows up to 35 scfm, Mini Dryer MD-35 performs effectively in intermittent flow applications. It can be installed indoors or outdoors with only inlet and outlet air connections required. Dryer handles inlet air temperatures up to 120°F and supplies -40°F pressure dew point. Loose desiccant needs only periodic replacement. Read More

Fluid & Gas Flow Equipment

Compressed Air Dryer ranges from 150-1,000 scfm.

June 18, 2007

SRC Refrigerated Cycling Air Dryer utilizes Montreal Protocol-compliant R407C environmentally green refrigerant and features control system that monitors thermal mass and dewpoint temperature. System includes single panel for access to all components and condenser section positioned separate from main body of dryer, allowing proper air flow and condenser cooling during maintenance. Optional RS-485 connection enables remote operation of dryer. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Cleaning Products & Equipment

Membrane Air Dryers offer quiet operation.

May 1, 2007

RequBalston® IT Series Membrane Air Dryers provide pure, dry compressed air at dewpoint of 35°F and flow rates from 1 to 50 scfm. They remove all compressed air contaminants down to 0.01 micron in size. Without any moving parts, units come with prefilters, auto drains, and membrane modules, and require no electricity. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Cycling Air Dryers are energy efficient.

March 30, 2007

Available for flows from 20-885 scfm in pressures up to 230 psig, Secotec(TM) Refrigerated Dryers deliver optimal efficiency by using thermal mass medium for storage and operating refrigerant compressor only when necessary. Air-to-air heat exchanger minimizes load on refrigeration system by pre-cooling inlet air. Stainless steel separator and electric demand drain provide reliability, and dryer construction facilitates access to all components. Read More