THK America, Inc.    Schaumburg, IL 60173 5340
Apr 06, 2006 Interchangeable with conventional linear bushings, Power Linear Bush is engineered with cages made of synthetic resin that continually lubricates rolling elements. It exhibits smooth, quiet motion due to construction of ball retainer and outer sleeve. Convex shape of ball plate provides pivot point at center, allowing self-adjustment capability up to 0.5° that eliminates possibility of edge pressure caused by inaccurate machining, mounting errors, or shaft deflection.

Heyco Products    Toms River, NJ 08753
Mar 30, 2006 Designed for flat wires and cables ranging from 0.12 x 0.32 in. to 0.24 x 0.42 in., RDD Lockits(TM) fit into Double D holes, protecting current-carrying wires from twisting and other stresses that can cause electrical failure. Units and cord sub-assembly snap into place without any tools other than electrical pliers. Five-step locking mechanism allows range of panel thicknesses up to .157 in. and exceeds strain relief requirements of UL 35 lb pull test.

Zero-Max, Inc.    Minneapolis, MN 55441 5537
Jan 30, 2006 Providing frequent mounting/dismounting capabilities with one radial screw, ETP Express Bushings position and lock all types of gears, pulleys, sprockets, and other components in power transmission system. Units provide accurate mounting without axial movement of bushing along shaft and help provide runout control to minimize vibration and noise. Offered in full range of metric sizes, bushings offer concentricity to .001 in. TIR and are suited for tight areas.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Dec 07, 2005 Split square hole sleeve Series A 7C19 is suited for producing tooling such as milling cutters or boring bars without broaching equipment, while split square hole bushing Series A 7C18 fits any mating size collet or 3-jawed chuck. Sleeves are cold-rolled steel C1117 and range in length from ¾-5 in. Bushings are 4140 steel and hardened to Re 40-45. Broached square holes, which range from .128-1.260 in., accommodate 12 tool bit sizes from 1/8-1¼ in.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Dec 06, 2005 Splines, offered as carbon steel C-12L14 Series A 1C25 or stainless 416 annealed A 1Y25 Series, permit sliding between mating members in axial direction. Shafts contain 16 external spline teeth, and stock lengths of splined shafts range from 1-6 ft. Splined bushings contain 16 internal teeth and are offered as carbon steel A 1C26 Series or stainless 416 annealed A1Y26 Series. Bushing ODs range from .625 in. to 1.500 in., and bushing lengths range from .40-1.5 in.

Richco, Inc.    Chicago, IL 60680
Aug 24, 2005 SC Snub Bushing series protects cable bundles from rough panel edges and provides light strain relief. With flexible inside diameter, users can slide cable into grommet and press part into mounting hole. Interior diameter material closes firmly against cable. Parts accommodate 1/32, 1/16, 3/32, and 1/8 in. panel thicknesses. Available in 3 sizes of cable holding diameters from 1/8–¼ in., parts come in black, RoHS-compliant, nylon 6/6 material.

John Deere Harvester Works / Cylinder Division    Moline, IL 61265
Jun 21, 2005 Intended for dozer undercarriages, SC-2 coating combines wear-resistant and corrosion-resistant properties. Extended-Life Undercarriage, featuring coated bushings uses GOPALITEâ„¢ process, which produces water-based slurry from heavy alloy-metal powder and several organic additives. Slurry formula suspends alloy powder and is used to apply coating to part surface, producing coating that is uniform in thickness and consistency.

EPCO    Fremont, OH 43420
May 06, 2005 Made of 660 bronze, Split Movable Platen Bushings enable replacement of machine’s platen bushings without requiring removal of tie bonds. This helps prevent machine problems cause by worn platen bushings, such as sagging, lubrication problems, clamp ram packing leaking, and platens out of parallelism. Included weld rings come drilled, tapped, and assembled.

Heyco Products    Toms River, NJ 08753
Apr 07, 2005 Lay-In Lockitâ„¢ Bushings are suited for electrical housings, cabinets, and motor or pump chassis with split housing or slot-style power entry points. Units convert raw-edged electrical enclosure holes to smooth-edged, debris-proof insulated holes. They accommodate round or flat, individual or bundled cable with diameters up to .600 in., and self-lock onto cables without tools. Made from Type 6/6 nylon, bushings withstand temperatures to 125°C.

Micro Plastics, Inc.    Flippin, AR 72634
Mar 01, 2005 Standard Insulating Bushings meet UL and Canadian Standards Association temperature and pull-out tests. Units are available to fit ¼-2 in. hole sizes with various inside diameter openings. Multiple locks positively snap in panels ranging from 1/32-1/8 in. in thickness.

J. W. Winco, Inc.    New Berlin, WI 53151
Nov 09, 2004 Suitable for holding, positioning, and clamping of workpieces, Side Thrust Pins feature knurled aluminum body that requires hole tolerance of H8. Available in light, standard, or heavy-duty end pressures, pins are zinc-plated hardened steel or Delrin plastic. Versions with NBR/perbunan rubber seal are gold-passivated and those without seal are silver-passivated. Made of steel with black oxide finish, Eccentric Bushings facilitate adjustment of side thrust pins.

Zero-Max, Inc.    Minneapolis, MN 55441 5537
Jul 21, 2004 Posi-Lok® bushings enable solid connection between shaft and mounted devices, providing keyless option for locking into position gears, pulleys, sprockets, and other components in mechanical system. Protected against corrosion, products feature socket-head cap screws that, when tightened, allow inner and outer hub to move along mutual contact surfaces. Bushings handle torque from 52–5,576 lb-in. and are available in bore sizes from ¼â€“1 in. and 6–35 mm.

Ringfeder Power Transmission USA Corporation    Westwood, NJ 07675
Mar 25, 2004 RING-lok(TM) keyless taper bushing system eliminates backlash by combining features of keyless locking device and steel taper bushing system into single unit. It is not influenced by reversing loads and will not vibrate loose. Suited for cast iron and steel hubs, product is used on V-belt and timing pulleys, couplings, and sprockets. Bushing sizes include 1108, 1210, 1610, 2012, 2517, and 3020 with inch sizes available on request for shaft diameters from .886-2.76 in.

Heyco Products    Toms River, NJ 08753
Mar 24, 2004 Round Double D Lockit™ series includes Models RDD101A, RDD401, and RDD501 to cover cables ranging from 0.125–0.600 in. in dia and accommodate various UL cable-type designations. With double flat sides, products fit into standard round or double-D holes to provide strain relief against twisting, pulling, cord pulsing, or gravity. Bushings have proprietary 5-step locking mechanism that accommodates chassis thicknesses to .125 in. and are available in 8 UL designation categories.

Heyco Products, Inc.    Toms River, NJ 08753
Feb 10, 2004 Bushings and Plugs are available in 10 sizes that fit ½â€“2 in. dia access holes for electrical and telecommunications cables, tubing, hose, rope, and utility lines. They fill un-used panel ports; prevent debris, insect, or moisture penetration; and provide abrasion resistance and vibration resistance to through-routed wires. Bushings and plugs snap into holes without using tools and withstand pushback forces up to 35 lb. They are constructed from high-impact Type 6/6 nylon.

Heyco Products, Inc.    Toms River, NJ 08753
Jan 06, 2004 Molded of type 6/6 nylon, Universal Bushings with Open/Close Rings mount around pre-assembled wires, cable, and hose bundles, routing and securing them inside electrical panels. They absorb vibration to cushion and insulate cables, tubing, hoses, or shafts. Products have split ring design and are offered in 9 sizes to fit ½â€“1½ in. dia holes. They snap into place with fingertip pressure and accommodate any shape to 1.062 in. dia.

Zero-Max, Inc.    Plymouth, MN 55441 5509
Dec 16, 2003 Suited for systems requiring frequent washdowns, stainless steel ETP Express Shaft Locking Bushings require no maintenance, handle temperatures from –22 to +180°F, and have sealed, clean lines that resist debris collection. Corrosion-resistant products provide concentricity to .001 in. TIR and handle torque from 40–1,500 lb-ft. They are available in 5/8–2 in. and 15–50 mm shaft sizes. Applications include food, beverage, and dairy processing equipment

EGS Electrical Group    Skokie, IL 60077
Aug 01, 2003 Series BLG Insulated Grounding Bushings provide means of grounding conduit and protect insulated conductors from abrasion during pulling and mechanical vibration. Thermosetting phenolic insulator is 150°C UL-rated. It will not soften, melt, burn, or dislodge during wire pulling, and will not shatter or shrink in sub-zero temperatures. Available in iron or steel with zinc plate or galvanized finish, and in aluminum or bronze, bushings range from ½â€“6 in.

GGB Bearing Technology    Thorofare, NJ 08086
May 23, 2003 LD(TM) heavy-duty, wear-resistant, bronze bushings feature perforated solid strip construction. Designed for use with oil, grease, and process fluid lubricants, products capture dirt and debris in perforations. Bearings are available as cylindrical and flanged bushings as well as custom parts. Maximum load is 43,500 psi static, 17,400 psi dynamic, and 5,800 psi rotating greater than 7 fps. Coefficient of friction is 0.065-0.15 with grease lubrication.

Heyco Products, Inc.    Toms River, NJ 08753
Apr 03, 2003 Double D Lockit seals electrical housing and chassis mounting and cord openings, while providing strain relief against wire or cordset twisting or pulling. Flat sides at both ends prevent bushing from turning in opening. Unit covers chassis ranges to 0.125 in. thick, with sizes to fit cords from 0.220–.430 in. dia. Bushing is high-impact Type 6/6 nylon with flammability classification of UL 94V-2, and withstands temperatures up to 125°C.