New Bushings Products

Splines and Splined Bushings fit shafts from 11/32-3/4 in.

Splines, offered as carbon steel C-12L14 Series A 1C25 or stainless 416 annealed A 1Y25 Series, permit sliding between mating members in axial direction. Shafts contain 16 external spline teeth, and stock lengths of splined shafts range from 1-6 ft. Splined bushings contain 16 internal teeth and are offered as carbon steel A 1C26 Series or stainless 416 annealed A1Y26 Series. Bushing ODs range...

Plastic Bearing tolerates extreme temperatures and loads.

Operating in temperatures to 500Ã-

Bearing Assemblies offer high temperature solution.

Operating under extreme temperatures ranging from -400 to +1,000Ã-

Plane Bearings are suited for food and pharma processing.

Plane bearings, offered in straight and self-aligning configurations, are available as unmounted bearings and in pillow block assemblies in single, twin, and flange block types. TeflonÃ-®-lined bearings can be operated without lubrication, are resistant to chemicals, and have stainless steel body. Suited for vacuum applications, ceramic-coated bearings must be lubricated and withstand rapid...

MAXPRO® High-Pressure Custom and Standard Systems

At MAXPRO® Technologies, we welcome the opportunity to design a system to meet your specific system requirements. From boosting gas pressure for molding baby bottles to scavenging helium gas from decommissioned missile tubes to research laboratories, our team of high-pressure engineers and technicians bring a wide range of experience to the table when developing solutions for your high-pressure challenges.

Snub Bushings protects cable from rough panel edges.

SC Snub Bushing series protects cable bundles from rough panel edges and provides light strain relief. With flexible inside diameter, users can slide cable into grommet and press part into mounting hole. Interior diameter material closes firmly against cable. Parts accommodate 1/32, 1/16, 3/32, and 1/8 in. panel thicknesses. Available in 3 sizes of cable holding diameters from 1/8-Ã-¼ in.,...

Plastic Bearings replace sintered-bronze bushings.

Self-lubricating iglideÃ-® M250 self-lubricating bearings, suited for low- to medium-load applications, provide vibration dampening and are resistant to impact, dirt, and chemicals. Developed using thermoplastic alloy modified for general load and wear resistance, products employ mix of solid lubricants that provide self-lubricating effect during dry operation. Bearings feature quiet...

Self-Clinching Bearings withstand temperatures to 540-

Featuring self-clinch, self-align design, high-temperature plain bearings are available in Graphite Bronze and TeflonÃ-® Bronze for commercial ovens in food operations and institutional kitchens. Bearings withstand shock, vibration, and side load and have Ã-

Hydro-Dynamic Pressure Bearings offer quiet operation.

Suited for light application use, S99HDPM Series is formed by stacking petal-shaped, laminated Aluminum-Silicon alloy plates housed in Stainless Steel case with polyurea-thickened grease containing antioxidant and anticorrosion additives. When shaft rotates, fluid between shaft guide and shaft generates pressure because of squeeze effect. Series include 7 bearings with IDs from 1-6 mm and max...

Alloy Coating eliminates bushing turns.

Intended for dozer undercarriages, SC-2 coating combines wear-resistant and corrosion-resistant properties. Extended-Life Undercarriage, featuring coated bushings uses GOPALITE(TM) process, which produces water-based slurry from heavy alloy-metal powder and several organic additives. Slurry formula suspends alloy powder and is used to apply coating to part surface, producing coating that is...

Split Platen Bushings facilitate worn part replacement.

Made of 660 bronze, Split Movable Platen Bushings enable replacement of machine's platen bushings without requiring removal of tie bonds. This helps prevent machine problems cause by worn platen bushings, such as sagging, lubrication problems, clamp ram packing leaking, and platens out of parallelism. Included weld rings come drilled, tapped, and assembled.

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.