|
|
|
|
|
Electronic Components & Devices
(Showing headlines 5181 - 5200) << 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 ...
|
High-Side Power Monitor measures current and voltage.Linear Technology Corp.
Milpitas, CA 95035
Feb 20, 2008
Offered in MSOP-10 and 3 x 3 mm DFN-10 packages, LTC4151 utilizes internal 12-bit ADC to continuously measure high-side current and input voltage from 7-80 V to give true power reading. Single-chip solution has 2-wire, I²C-compatible interface that reports input power data, which can be delivered continuously or via no-latency single snapshot mode. Third low-voltage input can be used to measure voltage from thermistor/fuse, and max total unadjusted error for measurements is ±1.25%.
|
Hall-Effect Sensors suit automotive applications.Micronas GmbH
Frieburg D-79108 Germany
Feb 20, 2008
Housed in TO-92UT package rated for -40 to +140°C, HAL 28xy Series integrates microcontroller, temperature sensor, and digital interface. Microcontroller performs spinning-current offset compensation, as well as first-order temperature compensation for Hall offset error and second-order temperature compensation for overall Hall-effect sensitivity. Digital interface makes sensors suited for applications such as seat-track position and fuel-level sensing.
|
 PCIe Quad Equalizer extends backplane and cable reach.National Semiconductor Corp.
Santa Clara, CA 95051-0695
Feb 19, 2008
Consuming of 100 mW (typ) per channel, PowerWise DS50EV401 supports PCIe Gen1 (2.5 Gbps), PCIe Gen2 (5 Gbps), and PCIe Gen3 (8 Gbps) data rates. Solution compensates for transmission medium losses, reducing deterministic jitter on 4 data transmission channels. Receive boost of 20 dB equalizes up to 10 m of PCIe cable or 40 in. of FR-4 PCB at data transmission rates up to 5 Gbps, with less than 0.2 unit intervals of residual jitter at equalizer output.
|
 Amplifier-Digitizer handles large strain gage applications.Pacific Instruments, Inc.
Concord, CA 94520
Feb 19, 2008
Designed for Series 6000 DAQ System, Model 6037 is 8-channel strain gage and transducer signal conditioning-amplifier-digitizer that automatically ranges gain according to signal level. Excitation is programmed in 1 V steps from 0-12 V, while 4-pole, low-pass filter provides bandwidths from 1 Hz to 1 kHz with programmable selection of filtered or wideband output. Unit features 16-bit Adc that digitizes transducer signals at programmable sample rates up to 10,000/channel.
|
 Wire Connector feautures push-in spring-cage technology.Phoenix Contact
Harrisburg, PA 17111 0100
Feb 19, 2008
FKCN 2.5 spring-cage plug connector allows rigid and flexible wires with ferrule to be connected quickly without any tools. Large wire entry supports flexible wire ferrules, and wires can be disconnected using orange actuation levers. Measuring 19 mm high, accompanying CCDN 2.5 is double-level, pin-in-paste base header. When used together, FKCN 2.5 and CCDN 2.5 support trend of smaller electronics components by creating free space on board.
|
IC enables short-range wireless services on mobile devices.STMicroelectronics
Lexington, MA 02421
Feb 19, 2008
Implimented in 0.13 micron embedded non-volatile memory EEPROM technology, ST21NFCA integrates all necessary hardware and software for complete NFC (Near Field Communication) system, including support for all NFC proximity and vicinity standards. It enables contactless communication at 14.56 MHz and integrates Host Controller Interface (HCI) functions as well as interfaces for I2C bus and SPI bus. System also includes ST21 smart card microcontroller.
|
Access Flow Processor is dedicated for PON OLT line cards.Ethernity Networks Ltd
San Francisco, CA 94129
Feb 19, 2008
Together with XAUI 10G for backplane/uplink connectivity, ENET4000 FPGA Access Flow Processor comes with user side interface selection of 8 x 1 Gbps SGMIIs for EPON or 4 x 2.5G SGMII for GPON. ENET architecture enables support of full PON OLT line card solution on one FPGA. Furthermore, solution supports all required networking and traffic management functionalities at 15 Gbps and includes SERDESs for direct connectivity to fiber transceivers.
|
Demodulator IC meets Chinese digital TV standards.Maxscend Technologies Inc.
Pudong,Shanghai China
Feb 19, 2008
Suited for TV and set-top box manufacturers addressing China's digital terrestrial television requirements, MXD1320 exhibits full compliance with GB20600-2006 national standard by supporting defined single- and multi-carrier modes. It achieves maximum resource sharing via algorithm and architecture design as opposed to placing 2 demodulators on one chip. Power consumption is rated at 170 mW.
|
Audio Line Driver has power supply range of 1.8-4.5 V.Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Feb 19, 2008
Available in 4 x 4 mm package, Model DRV601 2VRMS DirectPath(TM) integrates charge pump to allow complete audio output signal chain to run from single 3.3 V power supply. It features 2VRMS/channel output voltage into 600 W at 3.3 V, independent right and left channel shutdown control, greater than 105 dB dynamic range, short-circuit and thermal protection, and pop reduction circuitry. It is suited for television peripherals such as set-top boxes, HDTV receivers, and DVD players.
|
Transformers are for inverters used in LCD backlights.TDK Corporation of America
Mount Prospect, IL 60056
Feb 19, 2008
To meet demands of harsh automotive environments, IVT Series construction characteristics include high temperature resistant winding wire, laser welds, and sectionless bobbin. Leakage inductance is 150-300 mH, operating temperature range is -30 to 130°C, and devices measure 39.0 x 9.0 x 4.8 mm (max). Units are suited for LCD backlights used in car navigation systems, notebook personal computers, and other electronic devices.
|
 Variable Resistor Module simulates PT100 and PT1000 RTDs.Pickering Interfaces Inc
GRANTS PASS, OR 97526
Feb 18, 2008
Combining fine and coarse control mechanisms with calibration system, 18-channel PXI Model 40-262 provides resistance setting resolution of better than 10 mW over entire resistance range and accuracy of better than 0.1% for all resistance settings. Requested resistance value is provided by use of resistance calls to module. Calibration port can be used to calibrate resistor channels while unit is connected to UUT in test system using external DMM.
|
RF Power Amplifier is engineered for 2.3-2.4 GHz band.Anadigics, Inc.
Warren, NJ 07059
Feb 18, 2008
Supplied in RoHS-compliant 4.5 x 4.5 x 1.4 mm SMT package, AWM6422 is designed for WiMAX and WiBro applications. It supports IEEE 802.16e-2005 wireless standard as well as IEEE 802.16d-2004 and ETSI EN301-021 standards. Along with InGaP-Plus(TM) technology, solution integrates 25 dB attenuator, output power detector, and 50 W matched RF ports. It exhibits 30+ dB RF Gain and offers EVM contribution from 2.5%-4% at 22-25 dBm with +3.3 or +4.2 V supply.
|
Voice Processor mimics human hearing system.Audience
Mountain View, CA 94041
Feb 18, 2008
Housed in 2.7 x 3.5 mm package, A1010 Voice Processor IC integrates audio acceleration logic, custom DSP, audio peripherals, and control interfaces. Based on intelligence of human hearing system, unit enables instantaneous noise suppression of 25 dB for both stationary and non-stationary noise. Regardless of whether noise is local to caller or remote over mobile network, processor uses several grouping cues to group all sound sources instantaneously, delivering voice of interest clearly.
|
Reference Design Platform enables HEDGE smartphones.Broadcom Corp.
San Jose, CA 95110
Feb 18, 2008
Manufactured using 65 nm process geometry, Model BCM92153 integrates HSDPA baseband modem and Category 8 HSDPA modem on single monolithic chip. Power management unit supports dynamic voltage management with 2 programmable step-down regulators. Chip incorporates Bluetooth®, Wi-Fi®, GPS, and FM radio technology, along with digital image processing with support for up to 3.2 megapixel camera. CellAirity(TM) 2.0 software includes pre-ported applications for HEDGE-based multimedia handsets.
|
Power Amplifier suits 3G wireless handsets and equipment.Anadigics, Inc.
Warren, NJ 07059
Feb 18, 2008
Designed to meet requirements for GSM and EDGE mode operation with WCDMA and HSPA chipsets, quad-band AWT6155 Polar EDGE Power Amplifier delivers full power output in Polar EDGE Mode with 5 x 5 mm footprint. RoHS-compliant device includes separate amplifier chains, one to support GSM850/900 bands and another for DCS/PCS bands. Internal reference voltage and integrated power control scheme facilitate GMSK operation.
|
Diode Array features thyristor-based design.Littelfuse, Inc.
Des Plaines, IL 60016
Feb 18, 2008
Capable of protecting telecomm and datacom interface circuits from ESD and other overvoltage threats, SP725 Series of SCR Diode Array features 2-30 V operating voltage range, 14 A surge current with 8 x 20 µs waveform, 2 nsec rise time, 5 pF max input capacitance, and 5 nA typical, 20 nA max leakage current. RoHS-compliant unit meets IEC 61000-4-2 test requirements for 8 kV direct discharge and 15 kV air discharge as well as MIL-STD-3015.7 for 25 kV testing.
|
OCXO measures 1 x 1.4 in.MtronPTI
Orlando, FL 32804
Feb 18, 2008
Suited for applications in microwave radios, base stations, and test and measurement equipment, XO5120 Series OCXO offers -155 dBc phase noise performance at 10 kHz offset and 10 MHz nominal frequency. It also provides ±2 and ±3 ppb stability performance over commercial and industrial temperatures, respectively.
|
DC/DC Converter features output disconnect and LDO.Linear Technology Corp.
Milpitas, CA 95035
Feb 15, 2008
Model LTC3537, 2.2 MHz current mode synchronous boost regulator features internal 600 mA switches that deliver output voltages as high as 5.25 V from input voltage range of 0.68-5 V. At 3.3 V, it can deliver up to 100 mA of continuous output current from single alkaline cell or 300 mA from dual cell input. With input range of 1.8-5.5 V, 100 mA LDO can deliver outputs as low as 0.6 V. When both channels are operating, Burst Mode® operation or Boost Channel lowers quiescent current to 30 µA.
|
SMPS Stacked Capacitors meet military specifications.Kemet Electronics Corp.
Greenville, SC 29606
Feb 15, 2008
Intended for Switch Mode Power Supply (SMPS) and pulse energy applications, military-grade ceramic stacked capacitors are qualified to MIL-PRF-49470 and DSCC Drawing 87106. ESR and ESL values make them suited for power supply I/O filtering as well as snubber applications. Available in case codes 3, 4, and 5, solutions offer X7R dielectric, voltage ratings from 50-500 Vdc, and capacitance values to 47 µF. Chip stack is horizontal, and leadframe attachment is high-temperature solder.
|
Chipsets promote mobile consumer device functionality.Qualcomm, Inc.
San Diego, CA 92121
Feb 15, 2008
Along with 528 MHz ARM11(TM) applications processor, QST1000(TM) integrates various audio and video codecs; gpsOne® engine with support for Standalone-GPS and Assisted-GPS modes; and Bluetooth, Wi-Fi, and FM radio support. Multimedia features include camera, video playback up to VGA resolution, and TV-out. Also available, QST1100(TM) adds WAN connectivity for voice and data, while QST1105(TM) has hardware-accelerated 2D/3D graphics core that performs up to 2.8 million triangles/sec.
|
(Showing headlines 5181 - 5200) << 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494
|
|
|