Linear Technology Corp.    Milpitas, CA 95035
Jan 08, 2009 Driving external N-Channel MOSFET, LT3751 can charge 1,000 µF capacitor to 500 V in less than 1 sec, suitable for applications such as professional photoflash systems, RF security, and high voltage power supplies. It can be configured for primary-side output voltage sensing, without needing optocoupler. Unit features boundary mode control, VCC input voltage range of 5-24 V, programmable input over/under voltage lockout, and selectable 5.6 or 10.5 V internal gate driver.

Linear Technology Corp.    Milpitas, CA 95035
Jan 08, 2009 Meeting EMI and multi-gigabit SERDES specifications, LTM4606 and LTM4612 attenuate both radiated energy and conducted wideband harmonic energy. LTM4606 operates from 4.5-28 V input supply, regulates outputs from 0.6-5 V, and delivers up to 6 A to load. Operating from 5-36 V input supply, LTM4612 regulates output voltage of 3.3-15 V and delivers up to 5 A to load. Units are housed in 15 x 15 x 2.8 mm LGA package, weigh less than 2 g, and operate at temperature range of -55 to 125ºC.

EIC Solutions, Inc.    Warminster, PA 18974-1157
Jan 08, 2009 Built to NEMA 4/4X construction standards in steel and stainless steel, DVR Cooler suits indoor/outdoor applications. It can house and protect DVR, as well as other 19 in. rack-mount electronics such as servers, routers, modems, switches, amplifiers, network gear, and communication equipment. Equipped with companion cooling system to provide protection for electronics, enclosure is customizable to accommodate different mounting requirements.

Linear Technology Corp.    Milpitas, CA 95035
Jan 08, 2009 Operating on wide input range from 3.6-36 V with input transient protection up to 60 V, LT3682 is suitable for load dump and cold-crank conditions found in automotive applications. Switching frequency is user programmable from 250 kHz to 2.2 MHz, while 1.5 A internal switch can deliver up to 1 A of continuous output current to voltages as low as 0.8 V. Unit features low ripple below 15 mVP-P, Burst Mode® operation, and comes in 10-pin thermally enhanced 3 x 3 mm DFN package.

Linear Technology Corp.    Milpitas, CA 95035
Jan 08, 2009 Featuring 48 dBm OIP3 (output 3rd order intercept) at 200 MHz, LT5554 enables high dynamic range performance in ADC systems. It settles in less than 5 ns from gain change, while gain is digitally controlled from 2-18 dB by 7-bit parallel word, producing 0.125 dB steps gain control granularity. Powered from single 5 V supply, unit draws nominal supply current of 200 mA, has gain accuracy of ±0.1 dB from -40 to 85°C, and comes in 32-lead, 5 x 5 mm QFN surface mount package.

Wolfson Microelectronics plc    Edinburgh EH11 2QB  United Kingdom
Jan 08, 2009 Complementing WM8350 integrated power management device, WM8351 and WM8352 integrated high fidelity audio CODEC and power management ICs deliver 98 dB SNR performance. They include 6 analog inputs, 2 stereo analog outputs and 2 mono line outputs, and can drive headphones directly. Model WM8351 incorporates 4 DC-DC converters while 6 DC-DC converters are found in WM8352. Programmable on-chip amplifiers allow direct connection of headphones and microphones.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 08, 2009 Offered in 2020 case size, IHLP-2020CZ-11 has inductance range of 0.10-22 µH, saturation current of 1.7-25 A, typical DCR from 2.6-250.0 mW, and maximum DCR from 2.9-260.0 mW. It is suited for voltage regulator module and DC-DC converter applications in mobile devices and automotive systems. Packaged with RoHS-compliant, 100% Pb-free shielded, composite construction, unit operates from 55-125°C and is resistant to thermal shock, moisture, mechanical shock, and vibration.

AutomationDirect.com    Cumming, GA 30040-9905
Jan 07, 2009 Designed for optimal conservation of space, ZIPLink connection system reduces time to wire DirectLOGIC and CLICK PLC I/O modules to terminal blocks via 2-step process that takes 5 sec. Selection of connection cables for discrete and analog modules is available in 3 pre-wired lengths. Feedthrough, fused, interposing relay, sensor, and transient voltage suppression connector modules offer flexible options for field wiring termination.

3M Co., Electronic Products Div.    Austin, TX 78726
Jan 07, 2009 Series 95X Board-to-Board Stacking Connectors and Box Headers offer 10 µin. gold solutions for high-volume applications with less-stringent requirements for number of mating cycles, no exposure to temperature extremes or hostile atmosphere, and relatively short service life. Qualified in accordance with European requirements for IEC Performance Class 3 items, 2 mm products meet requirements of EU and China RoHS legislations and are compatible with lead-free processing up to 260°C.

Omega Engineering, Inc.    Stamford, CT 06907
Jan 07, 2009 Suited for bringing thermocouple probes to PCBs, PCC-OST and PCC-SMP Series attach directly to circuit board and are offered in 2 sizes to mate with standard or miniature connectors. Products are offered with J, K, T, E, and U calibrations, while N calibration is available in mini-SMP style connector. Able to be mounted horizontally or vertically, products come with mounting clip and are available with optional retainer clip for TO-92 style transistor.

Amulet Technologies    Santa Clara, CA 95050
Jan 07, 2009 Graphical OS Chip(TM) includes all hardware and software needed to create and drive color-rich GUIs (graphical user interfaces) for LCDs and touch panels. GUI creation is performed in dynamic HTML with drag-and-drop authoring tools, and built-in microprocessor manages all GUI functions. Integrated LCD controller supports 24-bit color and alpha-blending on active and passive displays up to 12 in. Along with power management controller, chip offers multiple interface options.

Advanced Analogic Technologies Inc.    Sunnyvale, CA 94085
Jan 07, 2009 Single-output AAT1185, fabricated in Modular BCD process, offers high- and low-side pins to drive external N-Channel MOSFETs. Supporting fully synchronous and non-synchronous operation, device enables development of solutions for disparate applications. Input range is 6-24 V, output voltage is adjustable from 0.8-5.5 V, and output current ranges from less than 1 A to 10 A. Controller has 490 kHz switching frequency and constant frequency voltage mode control.

Diodes, Inc.    Westlake Village, CA 91362
Jan 07, 2009 Supplied in one 3.0 x 3.0 x 0.6 mm leadless package, SBR05M100BLP integrates 4 SBR® diodes and achieves continuous forward current up to 0.5 A. It is used in applications requiring full wave bridge rectifier to convert low-voltage ac power signal to usable dc signal for power devices. Nominally, ac signal is directly supplied from RJ45 Ethernet cable and rectified through bridge rectifier to dc signal that can be used to power device. Typ forward voltage drop is 0.67 V @ 0.5 A.

Diodes, Inc.    Westlake Village, CA 91362
Jan 07, 2009 Dedicated synchronous controller, ZXGD3101, drives MOSFETs to perform as ideal diodes in synchronous flyback converters employed in external power adapters, servers, LCD monitors, and STBs. Leveraging zero point detector driver platform, device produces source/sink currents up to 2.5 A and offers 180 V blocking capability to ensure reliable operation. Proportional gate drive improves turn-off time to minimize shoot through as well as prevent premature turn-off of MOSFET at low loads.

Atmel Corp.    San Jose, CA 95131
Jan 07, 2009 Featuring gold-bumped pads for direct bonding of copper antenna coil, 363-bit read/write transponder IDIC® ATA5577M2 provides unique ID that guarantees access to secured areas and enables product traceability. It operates according to ISO 11784 and ISO 11785 (FDX-B) standards and, including optional trimmed 250 or 330 pF on-chip capacitors, measures 1 mm wide. With integrated LC-tank-capacitors trimmed to ±3% tolerance, antenna coil is only external component needed.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 07, 2009 Supplied in PowerPAK® SO-8 package, SiR476DP Gen III TrenchFET® power MOSFET features max on-resistance of 2.1 milliohm at 4.5 V gate drive and 1.7 milliohm at 10 V gate drive. This 25 V n-channel device, featuring on-resistance times gate charge of 89.25 nC at 4.5 V, is used as low-side MOSFET in synchronous buck converters and in secondary synchronous rectification and OR-ing applications. Construction is lead (Pb)-free, halogen-free, and RoHS-compliant.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 07, 2009 Supplied in PowerPAK® SO-8 package, SiR440DP Gen III TrenchFET® power MOSFET is 20 V n-channel device offering max on-resistance of 2.0 milliohm at 4.5 V gate drive and 1.55 milliohm at 10 V gate drive. On-resistance times gate charge is 87 nC at 4.5 V, and construction is lead (Pb)-free, halogen-free, and RoHS-compliant. Product is used as low-side MOSFET in synchronous buck converters and in secondary synchronous rectification and OR-ing applications.

TE Connectivity Ltd.    Berwyn, PA 19312
Jan 07, 2009 Intermateable with I-PEX Co., Ltd. CABLINE®-VS products, 0.5 mm LCD Coaxial Embedded Display Interface Connectors replace existing LVDS 6/8 bit single/dual channel signal transmission. Units accommodate consistent digital data transmission through 1, 2, or 4 DisplayPort lanes at reduced bit rate of 1.62 Gbps or high bit rate of 2.7 Gbps through each lane. They offer high density for notebook PC applications, minimizing space and accommodating future pin out for LED backlight technology.

Semtech Corp.    Newbury Park, CA 91320
Jan 07, 2009 Supplied in 5 x 5 mm package, SC417 high-current POL voltage regulator achieves optimal power density through power circuit layout and matching of driver to internal power switches. It has 3-28 V input range and programmable 150 mA LDO that can be used to provide 5 V for gate drive bias, allowing operation from one rail. Other features include internal crossover circuitry, pseudo fixed frequency adaptive on-time control, SmartDrive(TM) technology, and selectable ultrasonic power save.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 07, 2009 Packaged in PowerPAK® SO-8, p-channel TrenchFET® power MOSFETs with ±20 V gate source voltage can be used as adaptor switch and for load switching applications in notebook computers and industrial/general systems. Model Si7633DP 20 V MOSFET offers ultra-low on-resistance of 3.3 mW at 10 V and 5.5 mW at 4.5 V, while 30 V model Si7135DP offers on-resistance of 3.9 mW at 10 V and 6.2 mW at 4.5 V. Devices are 100% Rg- and UIS-tested and are halogen-free.