Touchstone Semiconductor    Milpitas, CA 95035
Mar 26, 2012 Fully specified to operate at 0.8 V, Models TS1002 and TS1004 are dual and quad single-supply operational amplifiers, respectively. Devices are unity gain stable with 0.5 mV offset voltage, low TCVOS of 10 µV/°C, and no output phase reversal. Operating over industrial temperature range of -40 to +85°C, Model TS1002 is available in 8-lead MSOP surface-mount package, while Model TS1004 comes in 14-pin TSSOP package.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Mar 23, 2012 Supplied in 3 x 3 mm MSOP-10 (DGS) package, automotive-qualified ADS1115-Q1 supports up to 860 samples/sec and integrates low-drift reference, programmable gain amplifier (PGA), 4-channel mux, and oscillator. For applications such as battery monitoring systems in HEV/EV vehicles and fuel/oil pressure sensing, integrated programmable comparator allowing over- or under-voltage threshold monitoring. Consuming 150 µA at 2 V, ADC has 2-5.5 V supply range and -40 to 125°C operating range.

MagnaChip Semiconductor    Cheongju-si,Chungbuk   Korea (south)
Mar 23, 2012 Able to support wide voltage ranges, 0.13 µm triple gate oxide CMOS process is fully compatible with standard CMOS process and designed to keep all device parameters unchanged within process variation ranges. Additional layer of gate oxide introduces 1.8 V CMOS into standard 1.2/3.3 V CMOS array on 0.13 µm technology. Using modular characteristic for IC design provides flexibility, allowing selection of 1.2/3.3 V or 1.2/1.8/3.3 V CMOS processes without design reverification.

IXYS Corp.    Santa Clara, CA 95054 2704
Mar 22, 2012 Operating from supply as low as 2.7 V, CPC5903 isolates 2 open-drain logic signals while providing 3,750 Vrms of galvanic isolation. Product enables isolated bidirectional I²C data signal and unidirectional clock signal, supports standard- and fast-mode I²C data rates, does not require any internal clocking, and supports direct static-state buffering without refresh clocks. Solution can also function as logic level translator for levels from 2.7-5.5 V.

Broadcom Corp.    San Jose, CA 95110
Mar 22, 2012 With integrated power management controller that lowers stand-by power to less than 100 mW, 40 nm Broadcom® BCM7574 helps operators transition directly from analog to all-digital basic HD cable TV services. CPU, graphics, video, and audio processing enables advanced Digital Transport Adapter (DTA) UIs. Device incorporates FastRTV® fast channel change technology and switchable cardless security is included for Cisco and Motorola head-end networks.

Broadcom Corp.    San Jose, CA 95110
Mar 22, 2012 Featuring MoCA 2.0 support and 7,000 DMIPs dual-core/quad-thread application processor, BCM7435 shows video broadcast content streaming simultaneously (with transcoding) wirelessly to multiple devices, while concurrently supporting secure web applications. CPU Core Web Domain Security secures web browsers and app stores to be delivered together with premium broadcast content while protecting overall core functions. Security is provided for up to 22 simultaneous video streams.

Kemet Electronics Corp.    Greenville, SC 29606
Mar 21, 2012 Suited for common applications in industrial, lighting, consumer, and alternative energy markets, SMT and miniature radial aluminum electrolytic capacitors are available in various configurations. There are 3 low-profile SMT series offered in voltages up to 450 Vdc, including low-impedance models with up to 5,000 hr life at 105°C. Also available, 7 radial-lead versions are offered with up to 10,000 hr life and voltages to 500 Vdc.

Blockmaster Electronics, Inc.    Elk Grove Village, IL 60007
Mar 20, 2012 With MPT Panel Feed Through Terminal Blocks, field wiring is outside enclosure and product circuits are inside shielded cabinet or box, enabling designers to isolate circuits from interference. Ten modules are available with ratings from 24 A/450 V to 150 A/1,000 V and pitches from 7.5-18.8 mm. Variety of push-on tab, solder, and screw terminations are offered. Mounting to panels is accomplished with knurled-nut, snap-on wedges or mounting screws depending on current rating of module.

Phoseon Technology    Hillsboro, OR 97124
Mar 20, 2012 Based on SLM(TM) Semiconductor Light Matrix technology, FirePower(TM) Lamps deliver total UV power up to 960 W and pure UV output of 380-420 nm. Water-cooled units offer advanced capability for new applications in flexographic and wide-format digital printing while also allowing system builders to optimize speed in other applications. Available in 3 curing options of 150 x 20, 225 x 20 and 300 x 20 mm, RoHS-compliant lamps are mercury and ozone free.

Allegro MicroSystems Inc.    Worcester, MA 01615
Mar 19, 2012 Intended for analog and digital satellite receivers, Model A8299 is a monolithic linear and switching voltage regulator that provides power and interface signals to LNB down converter via coaxial cable. Unit requires few external components, with boost switch and compensation circuitry integrated inside. Housed in 5 x 5 x 0.90 mm QFN-28 package, regulator meets or exceeds OEM requirements for satellite set top box designs.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Mar 19, 2012 Measuring 5.7 x 5.0 x 2.1 mm, Model LXDC55B features input voltage of 2.7-5.5 Vdc and can support output currents up to 3.0 A. Single output models provide 1.2, 1.8, 2.5, 3.0, or 3.3 Vdc nominal output. Measuring 4.0 x 4.0 x 2.0 mm and operating as output boost converter, Model LXDC44A delivers up to 0.7 A at 5 Vdc from input of 2.7-4.5 Vdc. Both multi-layer devices are constructed on ferrite substrate with embedded inductor, power IC, and I/O capacitors.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Mar 19, 2012 Offered in molded package in 5 standard EIA-535BAAC case codes, TANTAMOUNT® TL3 Series features capacitance range of 0.1-470 µF over voltage ratings from 4-63 Vdc with capacitance tolerances of ±10% and ±20%. Designed to extend battery runtime in portable devices, surface-mount capacitors are suited for portable instrumentation, tire-pressure monitoring, medical instruments, local power supplies, hand-held instruments, and battery backup supplies.

Honeywell Advanced Circuits    Minneapolis, MN 55426
Mar 16, 2012 Housed in subminiature SOT-23 surface mount package, SS39ET Series monitors magnetic fields from permanent magnet or electromagnet. Devices respond to both North and South poles, and can be powered with voltages as low as 2.7 V with low current consumption of 6 mA at 5 Vdc. Operating from -40 to 212°F, ICs are suited for pump control, current sensing for motor load monitoring, handlebar/throttle position sensing, and anti-tampering magnetic field sensing in smart remote utility meters.

Larson Electronics, LLC    Kemp, TX 75143
Mar 16, 2012 Converting 3-phase 480 Vac power to single-phase 120 and 240 Vac, 30 KVA Model MGS-30KVA-6X120-2X240 allows operation of equipment such as motors that require linear current and lighting/computers that require non-linear current. Portable unit distributes power through seven 120 V receptacles and 2 Hubble 50 A/240 V twist lock receptacles. Mounted on 1/8 in. thick diamond plate platform, system features weatherproof construction, heavy gauge square steel support frame, and integral skid pockets.

Alcatel-Lucent    Paris 75008  France
Mar 16, 2012 Designed for optical communications networks, PSE Photonic Service Engine can be deployed in range of configurations - from metro to regional to ultra-long haul - and transmit wavelengths over existing or new photonic lines. Intended specifically for use with 1830 Photonic Service Switch, chip enables more than 23 Tb of traffic to be transmitted along single optical fiber. Configurable design let operators adjust optical parameters to produce best performance for varying conditions in field.

Maxim Integrated Products    Sunnyvale, CA 94086
Mar 15, 2012 Designed to handle up to 3 A of continuous current, Models MAX14606/MAX14607 utilize reverse bias blocking to protect portable devices from damage caused by multiple power sources supplied simultaneously. Two integrated back-to-back FETs prevent voltage applied at intended output from feeding back into input. Housed in 1.3 x 1.3 mm WLP package, ICs protect systems against voltage faults up to +36 V and are suited for tablets, smartphones, and portable media players.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Mar 14, 2012 Featuring capacitance range from 1-70 µF and voltage ratings up to 350 V, Model MKP1847 is optimized for AC filtering in UPS systems, power supplies, inverter grid interface, and welding equipment. Device provides capacitance tolerance down to ±5%, low self inductance of less than 1 nH/mm of lead spacing, peak current capabilities up to 750 A, and RMS current up to 32 A. Offered in flame-retardant plastic case with resin seal, RoHS-compliant capacitor operates to +105°C.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Mar 14, 2012 Offered in 0805 and 1206 case sizes, D..EN802 and CRCW....EN802 devices come in 2 versions: approved to EN 140401-802, Version A, and approved to EN 140401-802, Version E. RoHS-compliant CRCW....EN802 features pure tin termination plating on nickel barrier, while D..EN802 has SnPb termination plating on nickel barrier and min lead content of 10%. Values include TCR of ±200, ±100, and ±50 ppm/K; resistance range of 1 W to 1 MW, and resistance tolerances of ±5% and ±1%.

Xilinx, Inc.    San Jose, CA 95124 3400
Mar 14, 2012 Incorporating single 28 nm Virtex®-7 HT FPGA and Xilinx Gearbox IP cores, Dual 100G Gearbox solution connects 100G interfaces with high-density 100 Gbps CFP2 optical modules. Product maps data between 10 and 4 serial lane interfaces, in both ingress and egress directions. Device converts data streams of either CAUI or OTL4.10 to 4 lanes of proposed CAUI4 or OTL4.4. In case of 100GE, original 20 PCS lanes are reconstructed internally, allowing per-lane debug, skew insertion, and data manipulation.

Supertex Inc.    Sunnyvale, CA 94619
Mar 13, 2012 Suited for use in portable medical diagnostic ultrasound devices and NDT testing applications, 4-channel HV7331 brings together controller logic interface circuitry, level translators, MOSFET gate drive buffers, as well as high-voltage and high-current P- and N-channel MOSFETs as output stage for each channel. Other features include ±2.5 ns matched delay, guaranteed output of over 2.0 A for each channel with ±70 V pulse swing, and up to 20 MHz operating frequency.