Aven, Inc.
Ann Arbor, MI 48108
Apr 28, 2008 Targeting telecom and electronics technicians, Model 10140 Crimping Tool for Micro Connections is capable of crimping 1.25-2.5 mm narrow pitch connector pin wires, and handles D-Sub connector contacts from variety of manufacturers. Pliers are made of S55C with Teflon coating, and feature oil-resistant elastomer handles, locking latch, and coiled spring. Measuring 6.8 in. long, tool allows for fatigue-free work.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Apr 25, 2008 Made of adhesive-backed polyolefin, QSW Wraparound Sleeves permit permanent repair of minor damage to cable insulation without requiring connector to be removed from cable. Products are available in flat sheets with widths of 60 or 100 mm and lengths of 100, 200, 300, and 400 mm. With continuous operating temperature of -45 to 110°C, sleeves have minimum shrink temperature of 70°C, with full recovery at 130°C. They install with small propane torch, heat gun, or production oven.

Weidmuller, Inc.
Richmond, VA 23236
Apr 18, 2008 Measuring 250 mm in length, Weidmuller crimper features hard/hard handle combination that withstands exposure to oils and lubricants. Leverage system ensures that fingers are not inadvertently squeezed together, decreasing hand fatigue. Made from hardened steel, crimper is equipped with integrated ratchet that allows it to open only when crimping process is fully completed. Tool meets requirements for hand crimping tools per DIN 41 641 Part 1.

Waytek Inc.
Chanhassen, MN 55317
Apr 10, 2008 Supplied with Mobile Crimp Tool Kit, crimp tool frame facilitates exchange of snap-in dies and eliminates need for buying multiple tools. Seven snap-in dies work on variety of applications including insulated, non-insulated, heat shrink, and Weather Pack terminals and splices. All dies come standard with interlocking holder and are pinned together so that pieces do not get lost.

Weidmuller, Inc.
Richmond, VA 23236
Apr 08, 2008 Including depot that allows storage of plotter pens directly on machine, MCP Plus Plotter provides custom printing on complete range of MultiCard tags/markers for terminal blocks, wires/cables, and other electrical equipment. Compact and lightweight unit features positioning frame which can hold up to 5 card types at a time. It also comes with universal power pack (110 Vac/240 V, 50-60 Hz), software CD, cables, frame, marking pen, and manuals for both hardware/software.

Greenlee Textron, Inc.
Rockford, IL 61109
Apr 03, 2008 Able to cut copper and aluminum cables up to 2/0 AWG, 727M Cable Cutter has molded grips with hard underside for strength and soft, slip-resistant, ergonomic outside for comfort. Grip width optimizes load bearing area to facilitate handling, and hot riveted joint provides smooth opening/closing action. Product uses forged steel blanks that are heat-treated and precision-ground for extended life and cutting capability. Black oxide finish provides additional safeguard against rust.

Greenlee Textron, Inc.
Rockford, IL 61109
Apr 03, 2008 Designed with 2 die positions, KP1022 Crimper is capable of crimping insulated and uninsulated terminals and splices from 10-22 AWG. Elongated nature of curved handles and double-cushioned grips optimize leverage and operator comfort. Smooth pivot action enables single-handed use, and precision-machined and hardened cutter blades at nose facilitate cutting of copper and aluminum wire.

Thomas & Betts Corp.
Memphis, TN 38125
Apr 02, 2008 Colored UV-stabilized Ty-Rap® cable ties are designed for outdoor applications subject to ultraviolet (UV) ray exposure, which can degrade strength of untreated nylon. UL®-Listed and CSA-certified products will blend in with cabling colors and not stand out where cables are in plain view. In addition to oval-shaped cable tie head, elements of construction include rounded body that does not cut into cables, and ribbed design that minimizes slippage along cable.

Richco, Inc.
Morton Grove, IL 60680
Apr 01, 2008 RoHS-compliant WIT-40LAR series eliminates need for multiple parts by incorporating cable tie and holder into one part. Able to be reused multiple times, products press and lock into pre-drilled holes and remove from panel when wings are pinched. Retaining tab secures any unused strap, eliminating need to cut off excess. Measuring 7.677 in. long, series accommodates bundles diameters up to 1.97 in. and offers minimum loop tensile strength of 40 lb.

Del City
Milwaukee, WI 53209
Mar 31, 2008 Ergonomic ratchet crimp tool has 4 crimp stations, ranging from 22-8 gauge, and color-coded crimp nests that help user match correct terminal. Mating mechanism prevents jaw slippage and misalignment, while handle length facilitates crimping process by requiring minimal force application. Release switch near handle operates with one push towards crimp nest. Designed for heat-shrink terminals, tool also accommodates standard insulated terminals.

Thomas & Betts Corp.
Memphis, TN 38125
Mar 27, 2008 Offering UL94 Flammability Rating of V-0, Ty-Duct® Wiring Ducts are suited for high-temperature applications up to 203°F or where specifications call for products that will not emit toxic or corrosive gases. Units provide complete solution for routing and concealing wiring in control panels. Smooth corners and edges prevent damage or disfigurement of wires, while V-shaped slot lead-in facilitates wire insertion.

Thomas & Betts Corp.
Memphis, TN 38125
Mar 03, 2008 Once in place, Catamount® Twist Tail(TM) does not require any tools for removal of excess length. Tail is removed via bend-bend-twist motion that does not leave behind any sharp edges. Suited for installation in tight spaces with no room for cutoff tool, product comes in 7, 11, and 14 in. sizes in either white or UV-resistant black.

Quick Cable Corp.
Franksville, WI 53126
Feb 26, 2008 With Battery Relocation Kits, users can relocate their battery in another area of their vehicle or boat for better weight distribution or traction, to create more room, or to facilitate access. Available in 5 versions, kits include all parts need to relocate or add another battery, and allow for top post or stud batteries.

Richco, Inc.
Morton Grove, IL 60680
Feb 26, 2008 WITBH series can be inserted into threaded, non-threaded, drilled, or punched holes. While barbed mounting head grips to inside of hole, ribs deflect when pushed into hole then spring back for secure lock. RoHS-compliant series, offering 50 lb of tensile strength, comes in standard Nylon 6/6 and Heat Stabilized Nylon 6/6, serviceable to 286°F. Products mount to range of materials, including wood, threaded metal, particleboard, plastic, foam, and rubber.

Richco, Inc.
Morton Grove, IL 60680
Feb 26, 2008 Pressure hold cable tie holder Model FTH-33 allows pre-assembly of cable tie into holder and secures it in position. Cupped mounting base prevents dust ingress while providing tight grip to board in environments prone to vibration. Part accepts all Richco QTE-30/50 and WIT-30/50 cable ties.

Network Technologies, Inc. (NTI)
Aurora, OH 44202
Feb 26, 2008 Designed for rackmount transmitter/receiver modules, which are interconnected via CAT5/5e/6 cable, XTENDEX ST-C5RCK-12 allows up to 12 extender modules to be mounted in 2RU shelf. Tray is equipped with 11 blank front panel covers to hide open slots on tray and to prevent change in airflow through rack cabinets.

Commscope, Inc. of North Carolina
Hickory, NC 28602
Feb 26, 2008 Designed for enterprises that have mission-critical network needs, SYSTIMAX® iPatch® M4200i 24-Port Intelligent Universal Modular Panel uses patching technology to provide insight into physical layer. Panel comes in 2 configurations such as bare panels without modules or pre-configured panels with 24 GigaSPEED X10D FTP M-Series outlets. It mounts in 19 in. rack with universal hole spacing and incorporates rear cable management and grounding studs for FTP applications.

Lapp USA
Florham Park, NJ 07932
Feb 21, 2008 With 20 different tubing and sleeving options in variety of sizes, colors, and lengths, OLFLEX® tubing and cable management solutions suit virtually any application or environment. Products offer insulation as well as chemical and temperature resistance for flexible and non-flexing cable in extreme environments. Offered in shrink ratios of 2:1, 3:1, and 4:1, tubing comes in dual wall, adhesive-lined, permanent bonding, and polyolefin type for liquid tight sealing.

Klein Tools, Inc.
Lincolnshire, IL 60069
Feb 19, 2008 Including Models K90-10/2, K90-12/2, and K90-14/2, Bent-Nose NM Romex® Strippers feature tool steel black oxide finish, precision ground stripping holes, shear type cutting blades, and Klein-Kurve® handles. Units eliminate need to angle tool, wire, or hand, enabling precise removal of outer jacket of non-metallic cable. They strip, cut, and loop 10, 12, or 14 AWG solid wire, and cleanly shear 6-32 and 8-32 screws. Models K90-12/2 and K90-14/2 also strip 18 AWG stranded wire.

Igus, Inc.
East Providence, RI 02914 0349
Feb 19, 2008 Guide troughs enable Energy Chains and Energy Tubes to operate with reduced friction over long travel lengths exceeding 16 ft. Available in steel or aluminum, corrosion-resistant aluminum troughs are suited for outdoor and wash down applications, while steel troughs are suited for lighter loads. Troughs are offered as separate components or fully assembled systems, come equipped with glide bars, and can be custom designed for specific application.