Electrical Connectors

High-Current DC Jacks come in horizontal, vertical configurations.
Electrical Connectors

High-Current DC Jacks come in horizontal, vertical configurations.

Offered without locating peg, shielded DCJ250-15 (vertical) has thru hole design with 6.60 mm dia jack cavity, 2 conductors, 3 contacts, and 7.00 A rating. Mating plug has 2.55 mm ID and 5.50 mm OD. With locating peg, shielded DCJ250-20 (horizontal) has thru hole design with 5.30 mm jack cavity, 2 conductors, 2 contacts, and 8.00 A rating. Mating plug has 2.55 mm ID and 5.50 mm OD. Both jacks are...

Read More »
Electrical Connectors

Convenience Power Outlet features snap-in mounting.

Designed to work with 0.8–1.8 mm panel thicknesses, Model 739W-X2/50 is rated up to 20 A at 125 Vac. NEMA 5-20 R outlet features Insulation Displacement Connections, which eliminate need for special tools and are designed to be used with 12 AWG solid copper conductors. During installation, line, neutral, and ground conductors feed through side of outlet, offering different options to mount...

Read More »
Harsh Environment Connectors feature IP68 and IP69K ratings.
Electrical Connectors

Harsh Environment Connectors feature IP68 and IP69K ratings.

Constructed of lightweight plastic, 12-pin Harsh Environment Connectors are designed with 3-point bayonet locking mechanism. UL and VDE approved units are resistant against climatic conditions as well as industrial and chemical substances.- Using crimp contacts to ensure shock- and vibration-resistant termination, connectors are available with silver or gold contacts that accept 26–18 AWG...

Read More »
Power Entry Module can be used in Protection Class II equipment.
Electrical Connectors

Power Entry Module can be used in Protection Class II equipment.

Designed according to IEC 60320-1 (style C18), Class II KMF supplied without ground pin and suitable for- medical equipment used in residences. Double insulation between energized components and exposed parts is tested with 4,000 Vdc. Available with 2-pole line switch and 1- or 2-pole fuse holder, module supports current ratings from 1–10 A at 250 Vac and features 4.8 x 0.8 mm...

Read More »
Wall-Plug Adapters support consumer electronics. .
Electrical Connectors

Wall-Plug Adapters support consumer electronics. .

Limited power source rated for 100–240 Vac input and 5 Vdc output, 10 Watt PSM10A Series is suited for wireless communications equipment, peripherals, portable equipment, and personal electronics.- Fixed-blade adapters measure 2.82 x 1.77 x 1.21 in. and feature 2.1 x 5.5 mm center positive DC output connector. With Class II double insulation and Class B EMI, series is certified to UL/cUL...

Read More »
Multipole Connector Panel Supports increase versatility, access.
Electrical Connectors

Multipole Connector Panel Supports increase versatility, access.

COB (connector on board) series does not require metallic enclosures to use multipole connectors inside electric panels; protection is provided by electric panel itself. While interchangeability of connector inserts increases- versatility, rear access to inserts via turnover device facilitates wiring inspection and tests with coupled connectors. Mobile parts are prearranged for clamping of...

Read More »
DC Power Jacks span current ratings from 1.5-8.0 A.
Electrical Connectors

DC Power Jacks span current ratings from 1.5-8.0 A.

Available in surface mount and through hole models with 0.65, 2.00, 2.35, and 2.50 mm center pin diameters, DC Power Jacks span current ratings from 1.5–8.0 A. Units come in shielded variations in both straight and right angle orientation. All jacks are tested to 5,000 mating cycles and offer operating temperature range of -25 to 70°C.

Read More »
IEC Appliance Outlet features IDC terminals.
Electrical Connectors

IEC Appliance Outlet features IDC terminals.

Featuring insulation displacement contact terminals, Model 4710 is a J style outlet according to IEC 60320, rated 20 A at 250 Vac by UL/CSA and 16 A at 250 Vac by ENEC. Unit provides IDC terminals for 10 AWG/6.0 mm-² in addition to 12 AWG/4.0 mm². Able to fit panels from 0.8–3 mm thick, snap-in outlet is qualified for use in applications designed to IEC/EN 60950, including power...

Read More »
Rugged Floating Board-to-Board Connector has self-aligning design.
Electrical Connectors

Rugged Floating Board-to-Board Connector has self-aligning design.

Providing ±0.6 mm floating in X and Y axis, FX20 Series absorbs mounting misalignment from multiple stacking connectors- and PCB shrinkage. Double beam contact structure provides shock and vibration resistance; each beam has unique vibration characteristic and contact force (0.5 and 0.35 N). Construction is resistant to sulfur dioxide, and operational range reaches 105°C. Parallel stacking...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics