E-Switch Inc.
Brooklyn Park, MN 55428 1514
Oct 15, 2009 Operating at temperatures of -20 to +85°C, ST3 series toggle switch features UL approvals, and tab, screw, and solder terminal options. It has contact rating of up to 24 A/2 hp, maximum contact resistance of 50 mW, insulation resistance of 800 MW minimum at 500 Vdc, and dielectric strength of 1,500 Vac for 1 min. Switch has rubber boot for water and dust protection and suits industrial applications, instrumentation, telecom, appliances, and medical equipment.

E-Switch Inc.
Brooklyn Park, MN 55428 1514
Sep 11, 2009 Featuring PVC cap for water protection, RRA series offers electrical life of 10,000 cycles. It has contact rating of up to 15 A, contact resistance of 35 mW max at 50 Vac, and insulation resistance of 100 MW min at 500 Vac. Dielectric strength is 1,500 Vac for 1 min and operating temperature is -20 to 105°C. Meeting UL standards for high power ratings, illuminated switch suits applications in audio/visual, lighting/ballast, medical equipment, and security panels.

NKK Switches
Scottsdale, AZ 85260-3420
Jul 09, 2009 Based on OLED SmartSwitch technology, IP64 rated OLED Rocker has electrical and mechanical life rated at one mil actuations minimum and OLED display features life of 52,000 hours minimum at 30% illumination. Monochromatic, multifunctional programmable display device has operating temperature range between -20°C to 70°C and panel cut out is 35.4 x 48.6 mm. Unit is suited for HMI and control systems to replace multiple switches and display.

Carling Technologies, Inc.
Plainville, CT 06062
Jun 30, 2009 Offering look and feel of electromechanical control coupled with built-in PCB, N-Series produces up to 144 individual switch IDs by using resistive ladder circuit and enables individual loads to be assigned to specific functions. Application software determines which load is being controlled as well as selected actuator position. While simplifying wiring harnesses, switch also enables specific loads to be controlled from any location within vehicle cab.

NKK Switches
Scottsdale, AZ 85260-3420
Jun 25, 2009 TV-8 rated to handle high inrush current, JWLW series snap-in mounted rocker switches are rated at 16 A at 125/250 Vac and 5 A at 72 Vdc for telecom applications. They are cULus recognized, dust-tight, and protected against effects of temporary water immersion to 15 cm. Mechanical and electrical life is rated at 25,000 operations minimum, while insulation resistance is rated at 1 GW at 500 Vdc. Housing and case are constructed with heat resistant resins meeting UL 94V-0 standards.

NKK Switches
Scottsdale, AZ 85260-3420
Apr 14, 2009 Designed with current ratings of 9 A at 125 Vac or 6 A at 250 Vac, miniature CWSC Series is available with full face LED illumination in red, green, or amber to give operators at-a-glance status indication. Mechanical life of 30,000 operations minimum is made possible by quick-make, quick-break contact mechanism, which limits arcing. Constructed with polyamide housing and polycarbonate rocker, switches have solder lug/.110 in. quick connect terminals.

Phaseda LLC
Beaverton, OR 97005
Mar 20, 2009 Compliant with UL, cUL, VDE, and European RoHS requirements, RL3-2 has UL rating at 16 A 125 Vac and 1/3 hp 125 Vac for high power and motor applications, and standard 10 A 125 Vac for small appliances and test equipment usage. VDE rating is 10(4) A and 6(2) A 250 Vac. Unit comes with PVC cap for dust and water protection and snaps into standard panel cut-out hole.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.
Maple Grove, MN 55369
Mar 12, 2009 UL/CUL recognized RC Series has switch function choices of OFF-ON or OFF-(ON) in single pole or double pole configuration. They are offered in 4 housing color choices, 8 actuator color choices, and with 8 different actuator markings. Terminals options include quick connect, solder lug, PC pins, right angle PC pins, and left angle PC pins. Illumination options include 2 choices of neon bulbs and 3 tungsten lamps. Electrical rating is 10 A at 125/250 Vac.

Cherry Electrical Products
Pleasant Prairie, WI 53158
Feb 13, 2009 Suited for panel-mount applications exposed to dust and water, KT and KM Series (lighted or non-lighted) as well as KS and KG Series (non-lighted only) are IP56-certified and offer 0.250 in. quick-connect tab termination. KS Series is rated of 16 A @ 125 Vac; KG, KT, and KM Series are rated at 20 A @ 125 Vac; and all 4 series are rated for 21 A @ 14 Vdc. While KS, KG, and KM Series switches fit panel cut-out of 36.8 x 21.2 mm, KT Series fits panel cut-out of 36.8 x 15.2 mm.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jan 19, 2009 Available in SPST, SPDT, DPST, and DPDT contact configurations, RoHS compliant PRC series power rocker switches are rated 20 A at 125 Vac and 10 A at 250 Vac. Actuation force is 400-2,900 g and operating temperature range is -20 to +80°C. Unit is sealed to IP66 and features snap-in mounting to a 21.2 x 36.6 mm panel cut-out. Switch provides protection against dust and liquids, and also offers screw, solder, or quick connect terminals as well as various rocker markings.

Phaseda LLC
Beaverton, OR 97005
Dec 31, 2008 Offered in single and double pole versions and compliant with UL, cUL, European ENEC, and RoHS requirements, HY60 Series provides IP54 protection against dust and water. It includes ON.OFF, ON-OFF-ON, and momentary functionality, and has power rating of 20 A and 2 hp at 125 Vac, making it suited for motor control applications. Switch uses glass fiber reinforced nylon and comes with 0.250 quick tab terminals or screw terminals.

Cherry Electrical Products
Pleasant Prairie, WI 53158
Dec 08, 2008 Suited for panel-mount applications in which switches will be exposed to dust and water, IP56-rated KS Series has rating of 16 A at 125 Vac, while KG, KT, and KM Series are rated 20 A at 125 Vac. All are rated for 21 A at 14 Vdc. KT and KM Series are available in lighted and non-lighted versions, while KS and KG Series are non-lighted. Offering 0.250 in. quick-connect tab termination, all switches are UL approved on AC loads.

Phaseda LLC
Beaverton, OR 97005
Oct 30, 2008 With VDE rating of 10(4) A and 6(2) A 250 Vac, RL3-6 series oval rocker switch has UL rating at 16 A 125 Vac and 1/3 hp 125 Vac for high power and motor applications, and standard 10 A 125 Vac for small appliances and normal usage. It has UL, cUL, and VDE approvals, and is fully compliant with European RoHS requirement. Available with standard and custom markings, switch features illuminations in red, green or amber.

Cherry Electrical Products
Pleasant Prairie, WI 53158
Oct 28, 2008 Fully-enclosed and IP65-compliant, KR Series suits applications where switch is exposed to fluids, weather, or other harsh conditions. It features silicone rubber actuator and snap-fit mounting and uses heavy-duty silver alloy contacts to achieve current rating of 20 A at 14 Vdc (16 A at 125 Vac). Offered in lighted and non-lighted versions, switch comes in maintained-action and momentary function options. Single- and double-throw designs are available.

NKK Switches
Scottsdale, AZ 85260-3420
Oct 27, 2008 Constructed of heat-resistant resin meeting UL94V-0 flammability ratings, WT, WR, and WB Series feature single-unit construction for protection from harsh elements. Available in single or double pole models, WT Series Toggle Switches are rated 10 A at 125 Vac and 6 A at 250 Vac or 10 A at 30 Vdc. WR Series Rocker Switches, available in single pole only, are rated 15 A at 125/250 Vac and 15 A at 30 Vdc. Single pole WB Series Pushbuttons are rated 6 A at 125 Vac and 3 A at 250 Vac or 6 A at 30 Vdc.

Schurter, Inc.
Santa Rosa, CA 95403
Oct 23, 2008 Available in 1-, 2-, or 3-pole versions and 5 illuminated rocker colors, TA35 Series features extended operating temperature of -30 to +60°C and conditional short circuit I_nc of 2,000 A. Units combine switching and thermal overload protection over current range of 0.05-20 A for 1- and 2-pole types, and 0.05-12 A for 3-pole version. Dead Man Switch remains ON while actuator is depressed, and turns OFF when released, making breakers suited for equipment where danger of injury exists.

Cherry Electrical Products
Pleasant Prairie, WI 53158
Oct 06, 2008 Designed with silicone rubber actuator and snap-fit mounting, single-pole KC Series and double-pole KD Series comply with IP56 standards and are suitable for applications requiring resistance to dust and water intrusion. Both types use heavy-duty silver alloy contacts to achieve current ratings of 20 A at 14 Vdc and 16 A at 125 Vac. Available in lighted and non-lighted designs, switches fit industry-standard panel cut-out of 20.2 mm in diameter.

Del City
Milwaukee, WI 53209
Oct 01, 2008 Designed to protect circuits from harsh environmental conditions, 12 V Toggle and Rocker Switch Panels are crafted to withstand marine settings but are resilient enough to tolerate various applications. Six-position toggle models are furnished with rubberized boots for extra protection, while 6-position rocker switches are also equipped with LED lights to indicate when they are activated. Four-position rocker models are secured with rubber gasket molding that redirects water away from switches.

C&K Components
Newton, MA 02458
Jul 22, 2008 Available in SPDT/On-On or SPST/On-Off configurations, CR Series panel-mount switches feature round body and choice of circular, oval, or paddle actuator styles. They fit 20.2 mm dia panel cut out, with behind-panel-depth of 22.6 mm, and can be illuminated in white, red, amber, or green. Max current rating is 16 A @ 125 Vac and 10 A @ 250 Vac, with VDE rating of 10 A @ 125 Vac and 6 A @ 250 Vac. Switches are available in black, white, and red opaque color combinations.

Phaseda LLC
Beaverton, OR 97005
Jul 17, 2008 Series KND2 snaps into industry standard panel cut-out size 0.862 x 1.169 in. and is equipped with 0.250 in. tab terminals for push-on assembly. Internal design allows protection against dust and water up to IP55 without external PVC cap. Functions include DPST On.Off, momentary (On).Off; DPDT On.On, On.Off.On, (On) ON, and two sides momentary. Switch has ac/dc rating and is UL approved at 20 A 125 Vac and 20 A 36 Vdc.