PXI RF Switch targets military ATE systems.

PXI RF Switch targets military ATE systems.

Available in 2 different versions based on electro-mechanical relays, Model 40-755 Multiplexer Module supports up to 10 off SP4T RF switches. High-density version occupies 1 slot of 3U PXI chassis and uses high-density multi-way connector that is suitable for switching frequencies to 500 MHz. Using SMB connectors, higher frequency version is suited for switching signals to 1.8 GHz.

Read More »

Triple SPDT Switch enables smaller, lighter 3D goggle designs.

Supplied in 1.8 x 2.6 mm miniQFN-16 package, DG9454 ensures 1.8 V logic compatibility over operational voltage range of 2.7-13.2 V at V+ and 2.5 to +5.5 at VL and features power consumption down to less than 1 Â-µA without need for extra logic translation circuit. Switch offers bandwidth to 540 MHz, charge injection over full signal range of less than 0.9 pQ, switch capacitance of 2 pF typ,...

Read More »
CAT5 RJ45 AB Switch is controlled via Ethernet or RS232.

CAT5 RJ45 AB Switch is controlled via Ethernet or RS232.

PathWayÂ-® Model 7294 16-Channel, CAT5 RJ45 A/B Switch with Ethernet and RS232 Remote Control allows sharing of single-port interface device, connected to common port, among 2 other devices connected to A and B ports for each channel. Remote control is via Ethernet 10/100 Base-T connection and either Telnet commands or GUI through RJ45 remote port. All 16 channels are switched simultaneously...

Read More »
Fiber Optic Switch/Converter allows fiber-to-copper network connection.

Fiber Optic Switch/Converter allows fiber-to-copper network connection.

Providing A, B, and cut-Off positions, Model 7263 fully complies with 802.3u 100Base-TX/FX standard and supports 100 Mb data rates. Internal data interface conversion circuitry allows fiber optic-to-copper network interconnection, and operation is transparent in terms of service protocol, bit-rate, and data. Along with optical throughput scalability, switch features A and B ports that are ST...

Read More »
Smart Efficiency with HARTING Smart Power Networks

Smart Efficiency with HARTING Smart Power Networks

The HARTING Technology Group at Hannover Messe 2011 Espelkamp,- The 64th HANNOVER MESSE takes place in Hanover from April 4 to 8, 2011. This year's overall theme is Smart Efficiency, and companies will be presenting solutions for the intelligent interplay between costs, process and resource efficiency at 13 international sector shows along the industrial value creation chain. France will be the...

Read More »
Westermo Devices Comply with ATEX, DNV, Industrial IT, UL and CSA Specifications

Westermo Devices Comply with ATEX, DNV, Industrial IT, UL and CSA Specifications

Westermo Data Communications have announced that many of its industrial communications products now comply with international industry specifications. The approvals, which include ATEX, DNV, Industrial IT, UL and CSA, have been applied to a range of Ethernet extenders, switches and media converters. The ATEX and DNV approvals enable the products to be applied in potentially explosive atmospheres...

Read More »

DIP Rotary Switches feature shaft actuation.

With shaft-actuated option, 10 mm FR02 Series enables convenient hand actuation, while still retaining ability to be adjusted with flat-tipped screwdriver. Actuators are fully rotational and can be operated either clockwise or counterclockwise. Electrical rating is 100 mA at 5 Vdc while switching and 100 mA at 50 Vdc when not switching. Measuring 3.8 mm in height, surface mount switches allow...

Read More »
Current Sensing Line Expands with Ground Fault Sensors and DC Current Transducers and Switches

Current Sensing Line Expands with Ground Fault Sensors and DC Current Transducers and Switches

AutomationDirect's acuAMP(TM) line of current sensors now includes AC ground fault sensors and DC current transducers and switches. The GFS series of ground fault sensors monitors all current-carrying conductors in grounded single and three-phase delta or wye systems. Available in fixed-core models, the GFS series features jumper-selectable setpoints of 5, 10 or 30 mA. The sensors can accommodate...

Read More »

Smart Grid Power Switch includes voltage and current sensors.

IntelliRupterÂ-® PulseCloser features high-accuracy voltage and current sensors that enable unit to respond to self-healing and protection applications for smart grid. These sensors capture current and voltage data needed to support other smart grid applications such as volt/var control and circuit optimization. System has sensing accuracy of 0.5%, supporting capabilities such as overcurrent...

Read More »

All Topics