Electronic Theatre Controls Inc.
Middleton, WI 53562
Jun 17, 2008 Designed to be scalable, Unison® Paradigm(TM) lighting control system fuses architectural and effects-oriented lighting control technologies to promote facility-lighting and building-systems integration. Energy saving management tools capitalize on daylight-harvesting, occupancy sensing, and time schedules, while library of lighting fixtures enable dynamic effects. Products include LightDesigner(TM) software, touchscreens and wall stations, as well as modular dimming and control enclosures.

Cypress Semiconductor Corp.
San Jose, CA 95134
Jun 10, 2008 EZ-Color(TM) LED controllers incorporate ColorLock(TM) feature, which allows use of optical feedback to automatically ensure precise color points over time/temperature. Supporting up to 16 LED strings, solutions let users complete designs without any C or Assembly coding. Along with tools for supporting white lighting design, solution enables calibration of color sensor and setting of color coordinates using 1976 CIELUV or 1931 XYZ color space charts as well as allowable deviations.

Prescolite
Spartanburg, SC 29303
Jun 09, 2008 Offered with various apertures, light sources, and distributions, Architektur series downlights are configured with socket cup that features spring position to facilitate installation as well as reflector adjustment. Design also ensures lamp maintains its vertical position while promoting rigidity and consistency from cup to cup and spring to spring. Compatible with limited plenum spaces, products also incorporate Virtual Source optics for glare control.

American Ballast
Fremont, CA 94538
Jun 04, 2008 With minimum lamp starting temperature of -30°C, energy efficient electronic HID ballasts are designed for supermarkets, malls, industrial sites, parking lots, and warehouses. Operating quietly at high frequency, they feature auto restart and shutdown function, 65-90 color rendering index, open circuit protection, short circuit protection, igniter failure protection, and surge protection. Units meet FCC rules and regulations and ANSI requirements as well as EISA and RoHS standards.

Leviton Manufacturing Co., Inc.
Little Neck, NY 11362 2591
May 20, 2008 Designed for installation in enclosed areas, Compact Fluorescent Ceiling Lampholder (Cat No. 9860) provides safe, energy-efficient lighting while complying with NFPA 70, NEC Section 410.16 fire safety standards. It uses 13 W GU24 bi-pin bulb that lasts over 10,000 hr and is designed for use with any standard, non-illuminated wall switch. Available with or without 13 W bulb and lamp guard, lampholder offers pigtail leads and knockout holes to accommodate multiple box configurations.

Advance Div. of Philips Electronics North America
Rosemont, IL 60018
May 15, 2008 Suited for use with most Building Management Systems, ROVR(TM) Ballasts come in 1-lamp, 54 W model for T5 fluorescent applications, as well as 1- and 2-lamp models supporting 17, 25, or 32 W T8 fluorescent applications. All feature IntelliVolt® multiple voltage technology and continuous dimming from 100% to 3%. Digital Addressable Lighting Interface enables 2-way communications with individual lighting fixtures and allows users to set up various lighting configurations.

Leviton Manufacturing Co., Inc.
Little Neck, NY 11362 2591
Apr 02, 2008 Supporting both Windows XP® and Windows Vista®, Z-Wave® USB Adapter is firmware-upgradeable and delivers 40 kbps Z-Wave support for home computers. Used in conjunction with ThinkEssentials® or other 3rd party software, product enables computer to communicate with Z-Wave enabled devices such as lighting and climate control.

Pass & Seymour/Legrand
Syracuse, NY 13221
Mar 28, 2008 Suited for multi-gang installations, Titan(TM) Commercial Dimmers include 1,600 and 2,000 W incandescent units, 1,600 Va magnetic low voltage dimmers, and wallbox-mounted products for 2-wire dimmable fluorescent ballast applications. Each comes with parts need to build screwless multi-gang faceplate in field, and voltage adjustment feature that allows At-Full voltage to be reduced without compromising slider's full dimming range. Dimmers work with single-pole and 3-way wiring and switches.

Endicott Research Group, Inc.
Endicott, NY 13761
Mar 26, 2008 Available in single- and dual-lamp versions, Smart Force(TM) SFW Series dc-to-ac inverters are designed for display backlighting applications that require wide range dimming, lamp current stability over wide input range (8-18 V), and full RoHS compliance. Intelligent power solutions, at less than 6 mm high, offer open lamp detection, onboard PWM dimming, and lamp current regulation. They can be used in 5.7-12.1 in. LCDs (single-output) or 6.4-15 in. LCDs (dual output).

Edmund Optics
Barrington, NJ 08007
Mar 26, 2008 Made from material with coefficient of thermal expansion of 0.5 mm/°C, UV Fused Silica Corner Cube Retroreflector offers transmission in UV, visible, and near-IR. When any laser beam hits corner cube, it reflects back in direction that it came, irrespective of what angle it arrived at. Available in 4 sizes ranging from 7.16 mm to slightly more than 50 mm in dia with larger sizes offering 3 arc-sec beam deviation, unit comes with or without aluminum coating.

Schneider Electric
Palatine, IL 60067-7399
Mar 19, 2008 Incorporating Building Automation and Control network communication protocol (BACnet®), Powerlink® lighting control systems can be seamlessly integrated into commercial building automation system. In addition to RS-485, Powerlink controllers can be connected directly to facility's LAN using 10BaseT Ethernet connection. This allows automation system's front-end software to communicate directly with each controller to monitor lighting status or perform user-initiated overrides.

Reelcraft Industries Inc.
Columbia City, IN 46725
Feb 01, 2008 Also suited for pharmaceutical applications and food processing, Model LS 5415 123 3M reel incorporates 304L grade stainless steel and medical grade cord assembly. Product includes 15 ft gray SJTO jacketed cord with medical grade endings, 4-5 ft pigtail, multipositional guide arm, and cord stop.

Advance Div. of Philips Electronics North America
Rosemont, IL 60018
Dec 24, 2007 Designed with self-heating thermal protector circuitry, e-Vision® HID Ballasts feature auto shut-off mechanism for lamps operating in questionable thermal environment due to misapplication or failure of thermal protector heating elements. IntelliVolt® multiple-voltage technology provides consistent protection and illumination, even during voltage dips or brownouts. With 90°C max case temperature, ballasts include automatic lamp power control, lamp monitoring, and EOL protection.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Dec 17, 2007 Available in 2 or 3 positions, LIGHT-N-LOK connectors provide hot-pluggable disconnect for fluorescent ballast lighting applications to allow safe field servicing without exposing personnel to electrical shock hazards. Integral strain relief optimizes wire retention by preventing inadvertent wire twisting and pullout. Wire retention exceeds 25 lb., and dual squeeze-to-release latches provide additional security by preventing unintentional disconnects.

SLI Lighting
Mullins, SC 29574
Dec 10, 2007 Model T5 ballasts are available in 28 and 54 W versions, while T8 ballasts are available in low power, normal power, and high power versions. Designed for high bay fixtures, ballasts are universal voltage, ranging from 120-277 V, and offer low THD.

LEDtronics, Inc.
Torrance, CA 90505
Nov 27, 2007 Suited for use with all 12 Vdc LED products, LED-DIMMER-001 offers continuously adjustable LED dimming range is 0-100% of input. One unit can dim supplied power for entire lighting channel or up to 2 A, 24 W max of LED bulbs, floodlights, tube lights, and light strips. Operating on 10-15 mA no-load current, solution does not add extra load to lighting circuit and is capable of driving up to 2,000 standard white discrete LEDs or 50 high-flux LEDs.

Pass & Seymour/Legrand
Syracuse, NY 13221
Nov 02, 2007 Featuring 700 W, 1,100 W, 700 VA, and 1,100 VA ratings, Harmony Dimmers combine ergonomic on/off paddle switch with separate slide control, which enables users to preset their desired lighting level. Available in ivory, light almond, white, black, and brown colors, they have constant memory that restores previous lighting level after power outage, and green LED that glows when dimmer is off for easy location in dark.

Watt Stopper, Inc., The
Santa Clara, CA 95050
Oct 26, 2007 Suited for areas with small lighting control zones, Model LI-ARP provides 2 relay outputs to support bi-level switching and manual-on operation. It can also accept inputs from occupancy sensors and daylighting controls. By providing terminations for loads as well as for control inputs, LI-ARP eliminates multiple runs of line voltage and control wiring back to central panel location. Controller communicates with Lighting Integrator Complete Control System via single data line.

Advance Div. of Philips Electronics North America
Rosemont, IL 60018
Oct 17, 2007 Designed to operate two 28 W T5 fluorescent lamps, Optanium® Ballast incorporates programmed start lamp ignition to extend lamp life in frequent switching applications, and IntelliVolt® technology, which enables ballast to operate at 120-277 V, 50/60 Hz. Safety features include auto restart and ballast shutdown mode. Available in .95 and 1.15 ballast factor options, unit operates from any line voltage switching device such as toggle switches and occupancy sensors.

IEPC Corp.
Huntington Beach, CA 92649
Sep 19, 2007 Combining solid-state electronics with on-site, remote, and aggregate Web-based controls, Vari-Ballast Control (VBC) includes electronic ballast and microprocessors to regulate current flow. Lamp and fixture maintenance is achieved by using built-in scheduler, timer, relay, and dimmer. Measuring 6 x 6 x 4 in., Model VB400 features 90-300 V universal input voltages, 14-430 W variable output wattages, and controlled start-up and shut-down.