W.A.C. Lighting Company
Garden City, NY 11530
Apr 02, 2009 Featuring die cast construction, LEDme(TM) Track Luminaires deliver strong projected light output without projecting heat, UV, or IR rays. Nine watt, 4,500 K unit performs like 50 W PAR 20/30 lamp, while 18 W 4,500 K LED model performs like 75 W PAR 30 lamp. Measuring 2¾ x 3 x 6 in. to 3½ x 3¾ x 7½ in., track heads are available with spot or narrow flood beam spreads. Units are suitable for residential, retail, hotel, and restaurant accent lighting.

Kim Lighting
City of Industry, CA 91749
Apr 01, 2009 Available with smooth, fluted, and traditional shaft styles, Era Lantern Bollard series feature 95% reflectivity, precise light distributions, and battery back-up modules for emergency illumination. Products meet IES and IDA full cutoff dark sky standards and are available with HID, fluorescent, and LED light sources. Elements of construction include hood, lens frame, double curved arm with internal wiring chamber, and hub of die-cast, low-copper aluminum alloy.

Cooper Crouse-Hinds Molded Products
La Grange, NC 28551
Mar 31, 2009 Class I, Division 1 factory-sealed EV LED luminaire is designed for general illumination. They offer instant illumination and restrike, white light, and no-lights-out feature which allows for continuous light output, even if single LED fails. Expected operating life of product ranges from 50,000 hr to more than 100,000 hr.

Lighting Specialties
Buffalo Grove, IL 60089
Mar 30, 2009 Incorporating intelligent PLUG + LIGHT electronics, FLAT LED flood light is able to connect to 24 Vac or Vdc power systems. Integrated LED operating device minimizes installation time and unit operates with minimal heat buildup and without stroboscopic effect. Waterproof to IP69K, system's LEDs offer service life of 50,000 hr.

Schreder Lighting LLC
Elk Grove Village, IL 60007
Mar 13, 2009 Available with wide choice of reflectors, lamps, and accessories, Focal Luminaires are IP66 rated, eliminating ingress of water, dust, and dirt particles. Body is crafted of die cast aluminum with partially screen-printed glass sealed onto it. Lamp position and beam can be adjusted on-site while fixture is in operation. With 4 refracting lenses, it is possible to obtain beams with oblong or square design.

Dialight Corp.
Farmingdale, NJ 07727
Feb 10, 2009 Designed to replace 250 W High Pressure Sodium light sources in hazardous locations, 100 W SafeSite® 250 Series delivers full spectrum white light and meets UL Class I Division 2 and Class II Division 2 requirements. Fixtures utilize 100 lumen/W Rebel LEDs, which illuminate large area and enable stanchion mounts to be placed at 12 ft or higher. T4 and T5 rated, LED fixtures do not require warm-up period and reach full light intensity in fraction of 1 second.

Cooper Lighting
Peachtree City, GA 30269
Feb 04, 2009 Suitable for interior and exterior environments, Shaper 613 Rio Decorative Elements Series is available in 6 and 8 in. sizes with choice of 13 round and square decorative elements, including recycled glass, fabric, resin, colored acrylic, and bamboo rings. Fixture is comprised of die-cast aluminum, stainless steel hardware, high-temperature silicone gasket, tempered glass lens, and double-finish protection. Lamp options include compact fluorescent, metal halide, halogen, and LED.

Schreder Lighting LLC
Elk Grove Village, IL 60007
Jan 28, 2009 Crafted of aluminum and glass, Hestia Luminaires utilize metal halide ceramic arc tube lamps up to 150 W. Units are designed around Sealsafe® optics, which feature one-piece, anodized, brightened and hydroformed aluminum reflector permanently sealed on tempered glass sag lens. High-pressure die-cast aluminum lamp access mechanism protects interior of optical system. To ensure lifetime protection, hermetically sealed optical unit prevents dust and water ingress to IP66 standard.

Snake Creek Lasers
Hallstead, PA 18822
Jan 23, 2009 Constructed of machined and anodized aluminum, water-resistant Prolight-G makes possible illumination and visualization of objects at distances beyond reach of traditional incandescent bulbs and LED-based flashlights. Unit features continuously variable cone-angle setting to accommodate short-distance illumination tasks. It comes with push-button tail-cap switch, lanyard, and one CR-123 Lithium battery.

Cree Inc.
Durham, NC 27703
Jan 05, 2009 Achieving color rendering index (CRI)of 92 and dimmable to 5% with standard protocols, 24 in. square Model LR24 recessed LED luminaire delivers high-quality, energy-efficient light for suspended-ceiling applications. LED contains no toxic mercury, has lifetime of 50,000 hr, and is appropriate for use in offices, schools, hospitals, and retail environments.

Guth Lighting
St. Louis, MO 63177
Dec 17, 2008 Suited for hazardous locations, vandal-resistant Tuffseal(TM) Luminaires come in 2 and 4 ft surface-mount models that provide indoor ambient and outdoor area lighting. Units feature single-piece, stainless steel or Aluzinc-plated steel housing; break-resistant, injection-molded polycarbonate lens; and poured-in-place closed-cell wrap-around gasket. Depending on model, illumination is provided by two or three F17 or F32 T8 lamps that provide up to 46,000 hours of rated life.

Guth Lighting
St. Louis, MO 63177
Dec 16, 2008 Featuring single-piece, rectangular, reinforced fiberglass housing with hinged ballast tray, Foodstar(TM) luminaires meet indoor ambient lighting requirements in biological contaminant-, airborne particulate-, and corrosive-prone workplaces. Lens is injection-molded and held with 12 captive stainless steel latches to provide even gasket seal. Depending on model, illumination is provided by 4-6 T5 HO, T8, and T8 VHO linear fluorescent lamps available in range of Kelvin temperatures.

Guth Lighting
St. Louis, MO 63177
Dec 16, 2008 Using 35 W, Sundowner(TM) LED features adaptive optics that emit sharply directional, forward and sideways illumination from building entryways and facades. Smooth-edged, awning-shaped architectural housing mounts flush to exterior building, wall, or other structural surface. Housing is die-cast aluminum with chip- and fade-resistant polyester powder-coat finish. Available in 120, 277, and 347 V, luminaire is Canadian and US listed to UL 1598 wet-location standards.

Besa Lighting Company, Inc.
Columbus, OH 43219
Dec 08, 2008 Amelia Pendants, which use 50 W halogen or 40 W xenon lamps, are available with Black and White Damask Glass Decors handcrafted with dimensional texture and pattern of Damask fabric. White Damask decor is also offered for flush mounted ceiling luminaires of Slipstream fixtures, which are UL-listed for indoor and damp locations. Tamburo wall sconces are also available with Damask Decors. For each product, designs are hand-applied inside shades.

Lamar Lighting Co., Inc.
East Farmingdale, NY 11735
Dec 05, 2008 Offering tool-less ballast access, Max-ER recessed direct/indirect revitalization luminaire delivers up to 97 lumens/W. Fully-wired, one-piece unit uses T5/T5HO lamps and ballasts and can be directly installed into most existing parabolic housings. Luminaire brings volumetric-type lighting to any space, delivering even light distribution and eliminating cave effect produced by parabolic luminaires.

Kim Lighting
City of Industry, CA 91749
Dec 04, 2008 Suited for integration into outdoor lighting plans, Round Wall Forms® Series is made of die-cast, low-copper aluminum alloy with double side walls. Full-, half-, cutoff-, and shallow cutoff-face fixture types are available. Flat clear lens option reduces unwanted glare, while ADA recessed lens option provides optimal visual impact. Available with 15 or 30 W super bright white LED modules, series also provides choice of prismatic, smooth, or hooded exterior fixture lens.

ALBEO TECHNOLOGIES
Boulder, CO 80301
Nov 19, 2008 Offering replacement for metal halide or high bay fluorescent fixtures, Constellation LED High Bay Luminaire features 20,000 lumen output, 360 W max power consumption, and over 50,000 hours of operating life. LEDs are fully dimmable and compatible with various controls, contain no mercury, are nearly unbreakable, and are free of flicker and buzz. Applications include industrial, commercial, warehouse, and retail spaces.

Schréder Lighting LLC
Elk Grove Village, IL 60007
Nov 18, 2008 Albany luminaires feature corrosion-resistant aluminum construction and ballast module that twists off for relamping and maintenance. They incorporate Sealsafe® hermetically sealed optical unit, which is constructed of aluminum and features reflector bonded to lens. Units can be installed on poles from 16-23 ft high and are available in Maxi size with luminaire height of 26.8 in. and 27.6 in. dia and Midi model at 23 in. tall with 23.2 in. dia.

Kim Lighting
City of Industry, CA 91749
Sep 16, 2008 Offered in 2 fixture styles and 5 finishes, LED Site Wallforms® Series features heavy-wall cast aluminum heads, and sealed fixture-to-wall junction with no exposed mounting hardware. Optical modules are engineered to produce asymmetric light distribution using horizontal lamp and flat tempered glass lens. Available with 30 or 60 W LEDs, luminaires are suited for use over doorways, ATM machines, and other public areas requiring wide, controllable light distribution.

Clark-Reliance Corp., The
Strongsville, OH 44136
Sep 03, 2008 Designed to help increase safety, Jerguson® NightStar illuminators use array of bright LEDs to continually shine on liquid level gage's magnetic flag indicators. This provides high-contrast, 24-hr visibility with which to verify liquid levels in no- or low-light environments. Illuminators can be field-upgraded on any Jerguson Magnicator II® magnetic liquid level gage and can also serve to upgrade other manufacturers' gages.