Measuring 6.3 in. in diameter, JADE9 utilizes 9 RGB LEDs to achieve dramatic lighting effects for wide range of architecture. Unit offers choice of 6 distributions in symmetric or elliptical beam patterns. Rotationally symmetric distributions are available in narrow, medium, wide, and extra wide beams. Equipped with on-board control functions and integral LED driver that accepts 120–277 V at 50/60 Hz, IP66-rated luminaire operates from -40 to 122°F with continuous dimming from 1–100%. Read More
Peachtree City, Ga. - Power management company Eaton today announced that it is demonstrating its Streetworks wireless smart city solutions featuring light-emitting diode (LED) outdoor luminaires with CIMCON’s intelligent, wireless controls, sensors and software products at the IES Street and Area Lighting Conference in Hollywood, California, on September 18 to 21 at the Lowes Hotel at booth... Read More
Mounted with track, canopy, c-clamp, and busway, Murro High Power LED Wall Washers provide 2-to-1 fixture/wall spacing ratio that optimizes light generation to minimize fixture quantity requirements. Lens and textured reflector provide even, intense washes of light. Using 47 W while operating on 120–277 volt systems, passively cooled luminaires feature lockable vertical 0° to 90° tilt and 360° rotation. Available CCTs are 2700K, 3000K, and 3500K, and CRIs are 97 and 83. Read More
ONYX and POWERSHINE MK2 D: Two Griven USA Luminaires Selected for Inclusion in 2016 Illuminating Engineering Society Progress ReportSeptember 12, 2016
Two Griven USA Luminaires Selected For Inclusion In 2016 Illuminating Engineering Society Progress Report Gaffney, South Carolina — Griven USA is proud to announce the inclusion of ONYX and POWERSHINE MK2 D in the Illuminating Engineering Society (IES) 2016 Annual Progress Report. The IES Progress Committee selected the architectural LED outdoor surface-mount luminaires based on criteria of... Read More
Designed to fit shallow plenums above ceilings in residential and light commercial settings, Aether IC Rated downlight has 3.5 in. profile housing, is Energy Star®- and wet location-listed, and dims with ELV or 0–10 V dimmers. This 70,000 hr-rated unit, which fits into .50–1.5 in. thick ceilings, operates with 22.5 W and delivers up to 1,375 lm. Choice of 25° narrow or 40° flood beam accommodates diverse applications, CCTs range from 2700K to 4000K, and CRIs range up to 90. Read More
KOTA LED high bay luminaires (185, 240, and 320 W) employ Flip Chip Opto COB LEDs, which dissipate heat via electrode channels, and cold-forged heatsink that facilitates passive cooling. Al 1070 heatsink cores and Al 1050 fins forged with EPD finish keep fixtures cool and eliminate need for cooling fans. Along with 105+ lm/W efficacy, 80+ CRI, and 50,000+ hr rated life (LM70), luminaires feature pre-wired cord, loop mount or mounting bracket, and various Kelvin temperatures. Read More
Available in 44, 66, or 89 in. lengths, BALDUR SOLO features narrow cross section of 2 ½ x 3 3/16 in. Lighting modules deliver up to 12,000 lumens with efficacies up to 125 lm/W. Offered in 4 light distributions, luminaire provides warm and neutral color temperatures of 3,000, 3,500, or 4,000 K. Optional 0-10 Vdc dimming delivers further energy savings over conventional lighting solutions. Luminaire is suited for interior lighting applications in retail, commercial, and light industrial settings. Read More
Replacing 70–1,000 W HID products, Lumark Night Falcon™ LED floodlight luminaires include small and large models in multiple wattages. Optics deliver uniform illumination, and max fixture spacing is achieved utilizing 6H x 6V NEMA distribution. Outputting 2,900 to >33,000 lm, series is available in standard 4000 K and optional 3000K, 5000K, and 5700K CCTs with 70 CRI, and 50,000 hr life rating. Knuckle, slipfitter, and trunnion mounting configurations are available. Read More
Able to replace 75–250 W HID fixtures, MR multifunction LED luminaire can be configured to meet needs of commercial and industrial lighting scenarios. Beam distributions allow for diverse lighting patterns, and adjustable brackets allow multiple mounting options. While profile allows unit to fit into tight spaces, CID2 rating enables operation in hazardous locations, triple layer coating withstands coastal environments, and finned design promotes efficient operation even at 55°C. Read More
Offering energy-efficient replacement for metal halide fixtures, CP Series produces 2,600–5,300 lm with minimal glare, carries 100,000 hr (L70) rating, and delivers efficacy of up to 111 lm/W. Standard features include 5000K CCT; 25, 40, and 55 W power levels with equivalencies up to 250 W; <5.5 in. depth that maximizes vehicle clearance; frosted, shatter- and UV-resistant lens; and 0–10 V dimming driver. Options include photo and motion controls and internal battery backup.
The BIG LUMEN Lighting Co., creator of the award-winning Foreverlamp™ LED Retrofit Lamp Series, announced that its HB™ Series High-Bay LED fixtures have been added to the DesignLights™ Consortium (DLC) Qualified Products List (QPL). As an innovator and leader in high power, high lumen lighting, the HB Series High-Bay, combined with the Foreverlamp LED replacement lamps, have been... Read More
Constructed with architectural frame and mouth blown, etched opal glass, dweLED™ Compass luminaires include flush mounts, pendants, vanities, and wall sconces. Flush mount and pendant both feature brushed aluminum and bronze architectural finishes, and wall luminaires come in 1-, 2-, and 3-light configurations. Without requiring any transformer or driver for operation, thes 3000K, 90 CRI, IP65-rated products deliver up to 1,890 lm and dim smoothly and continuously with ELV and TRIAC dimmers. Read More
Peachtree City, Ga. - Power management company Eaton today announced a collaboration with NuLEDs™, Inc., a leader in Power-over-Ethernet (PoE) lighting systems, aimed at making buildings smarter and seamlessly securely connected. The two companies will go to market with a joint product offering including Eaton’s complete portfolio of PoE-enabled light-emitting diode (LED) luminaires and... Read More
Available in low (12–24 Vdc) and high (277–480 Vac) input options, ETL-Listed SBX series feature IESNA Type V circular lighting pattern and can serve as replacements for HID lighting in outdoor applications. Low-profile, 24–300 W luminaires, available in 3000K, 4000K, and 5000K CCTs, produce 2,274–29,000 lm and can also replace Metal Halide/HPS fixtures of 100–1,000 W. Multiple mounting accessories are available, and IP65 safety rating suits wet locations. Read More
Featuring 6 in. profile, Mercmaster™ LED Luminaires deliver 5,000 lm of uniformly distributed light for maximum worker productivity and safety. Units are suited for areas with ceiling heights up to 15 ft or where OSHA regulations limit use of ladders. By using identical housings and mounting hoods, luminaries maintain same look and feel as Mercmaster™ HID versions. Replaceable globe alternatives include clear glass, clear polycarbonate, diffused polycarbonate, and prismatic glass refractor. Read More
Available in 2, 4, and 8 ft lengths with lumen output from 3,700–41,000+ lm, LED IP65 vapor-tight linear luminaires withstand water projected by 0.25 in. nozzle with water volume of 3.3 gpm for 15 min. LEDs with 100,000 hr LM70 rating ensure minimal maintenance, while polycarbonate body promotes durability. Along with 70+ CRI, dimmable products feature 3000K, 4000K, 5700K, RGB-W, or custom Kelvin/colored LEDs; 120° standard beam spread (80° optional); and multiple sensor options. Read More
Utilizing PLED Optical System, ValuLume is available with 10 light distributions and field rotatable/replaceable optics. Unit's 40- and 80-array PLED modules are rotatable in 90° increments, allowing light pattern to be set independently of luminaire's orientation. Housed in cast aluminum with cooling fins, fixture ranges from 45–266 W with 3,000, 4,000, and 5,000 K CCTs. Electrical compartment allows use of LED drivers, wireless control modules, hi-lo dimming modules, and motion sensors. Read More
COMMERCE, CA Nora Lighting’s Iolite modular LED downlight has won a Product Innovation Award (PIA) from Architectural SSL magazine, reported Fred Farzan, Nora Lighting president and CEO. The award honors the most innovative LED/solid-state luminaires and fixtures on the market, while also recognizing the companies that manufacture these light sources. “The PIA program recognizes... Read More
Respectively producing 2,000 and 4,014 lm, 2 and 4 ft, dimmable, purpose-built, vapor-tight, linear luminaires feature Samsung LEDs and provide CRI of 80+. Performance of 4 ft luminaires exceeds performance of 2-lamp T12 and T8 vapor tight linear fluorescent fixtures in all categories. While rated LM70 at 50,000 hr, DLC-qualified fixtures are also IP65 rated and ETL listed. Integration of LEDs into fixture eliminates risk of lamp breakage and release of Mercury into workplace.
With rounded form factor that blends into contemporary and traditional settings, DLC-listed DiscMAX is available in Type III and V distributions, specifiable as 80 or 115 W, and capable of replacing up to 400 W HID fixtures. Construction is of corrosion-proof aluminum, and full-module heat sinking maximizes reliability and longevity. Along with 50,000 hr (L70) operating lifetime rating, features include 6,000–10,000 lm output and 10 kA surge protection.