Fiber Optic Lighting

Electrical Equipment & Systems, Green & Clean

Fiber Optic Illuminator brings sustainability to microscopes.

Jan 29, 2016

Featuring 6 x 4.75 x 9 in. footprint, LuxPro LED Fiber Optic Light System is suitable for mounting and stacking in constrained areas. Illuminator is equipped with standard 0.625 in. light guide fitting and provides consistent cool white color temperature of 4,500 K. Operating from 96–264 Vac, LuxPro features linear light intensity control with continuous dimming, and advanced heat pipe... Read More

Electrical Equipment & Systems, Health, Medical, & Dental Supplies and Equipment, Vision Systems

Incom Fused Fiber Optic Chosen by Fairlight to Offer Next Generation Human-Machine Interfaces

Jun 03, 2015

Incom's superior quality glass and polymer fiber optics are key components of Fairlight's Picture Key Technology, giving OEMs endless design, feature and performance possibilities CHARLTON, Mass. and SAN JOSE, Calif., – Incom, the world's largest supplier of fused fiber optic solutions, today announced it has been chosen as the strategic provider of fused fiber optics in an... Read More

Display & Presentation Equipment, Electrical Equipment & Systems

LED Fiber Optic Illuminator increases signage brightness.

Jun 18, 2013

Designed for architectural and signage applications, LED fiber optic illuminator leverages Recycling Light Technology (RLT™) and can support both 3M single core fiber or Schott multi-fiber bundles. This allows RLT system, which increases brightness to LEDs with full red, green, blue, and white color capability, to replace neon-based signs currently used in side-firing applications.... Read More

Display & Presentation Equipment, Electrical Equipment & Systems, Vision Systems

Fiber Optic Illumination Platform increases available brightness.

May 03, 2013

Suitable for architectural and signage applications, Recycling Light Technology (RLT™) increases brightness available to large core, single fibers by 3M and flexible, small diameter fiber bundles by Schott. Both are designed for side-emitting applications suitable for replacing neon tubes, with 50,000 hr lifetime of LEDs. Illumination platform has produced brightness improvements of up to 2.5X... Read More

Electrical Equipment & Systems

Wavien, Inc. Introduces LED Based Medical Illumination Platform Using Recycling Light Technology

Apr 30, 2013

Low-cost RLT(TM) increases fiber optic brightness in surgical operating systems VALENCIA, Calif., -- Wavien, Inc. has introduced a LED based medical illumination platform based on its proprietary Recycling Light Technology (RLT(TM)).  RLT technology, which is implemented using a single RLT reflector, significantly increases the brightness available to fiber optic bundles used frequently in... Read More

Electrical Equipment & Systems, Test & Measuring Instruments, Vision Systems

Catch the Newest SPI and AOI Inspection Solutions from CyberOptics in Action at SMT Hybrid Packaging 2013

Apr 01, 2013

CyberOptics Corporation (Nasdaq: CYBE) will showcase its latest, award-winning SE500ULTRA™ SPI system and QX600™ AOI system in booth #323, Hall 6 at the SMT Hybrid Packaging exhibition and conference which is scheduled to take place April 16-18, 2013 at the Messezentrum in Nuremberg, Germany. The QX600™ AOI System comes with an all-new Strobed Inspection Module (SIM) with enhanced... Read More

Electrical Equipment & Systems, Optics & Photonics, Test & Measuring Instruments, Vision Systems

CyberOptics' Most Advanced SPI and AOI Inspection Solutions on Display at NEPCON Korea

Apr 01, 2013

CyberOptics Corporation (Nasdaq: CYBE) will present its newest range of SPI and AOI inspection solutions in its representative HumanTek’s booth E-125 in Hall C at SMT/PCB NEPCON Korea, scheduled to take place April 3-5, 2013 at the Coex Convention Exhibition Center in Seoul, South Korea. The QX600™ AOI System comes with an all-new Strobed Inspection Module (SIM) with enhanced... Read More

Electrical Equipment & Systems

LED Fiber Optic Light illuminates borescopes and microscopes.

Mar 04, 2013

Using maximum of 80 W, LuxPro LED Fiber Optic Illuminator features linear light intensity control with continuous dimming. Unit provides consistent cool white color temperature of 4,500 K and is equipped with 0.625 in. light guide fitting. Advanced heat pipe technology uses metal core PCBs, while precision-engineered cooling provides quiet operation. Measuring 6 x 4.75 x 9 in., illuminator is... Read More

Electrical Equipment & Systems, Green & Clean

Fiber-Optic Illuminator assures uniform inspection lighting.

Jan 17, 2013

Featuring precision-engineered cooling for virtually silent operation, ProLux LED Illuminator provides lighting for microscopes and visual inspection systems used in applications such as semiconductor and electronics manufacturing. Unit features linear light intensity control with continuous dimming and LEDs with lifespan of at least 25,000 hours. Delivering uniform color temperature of 6,000... Read More

Electrical Equipment & Systems, Test & Measuring Instruments

High-Intensity Fiber Optic Light illuminates vessels and pipes.

Dec 07, 2010

Usable with either separate or combiled light/sight ports, Lumiglas® Lumiflex Model USL08 LF-Ex is suited Class I, Div 1 and 2, Groups C and D wet and hazardous locations. Featuring 1,950 lux output, UL-listed unit has halogen lamp and parabolic reflector that focuses light through fiber-optic light guide. Fiber-optic cable with dia of 17 mm is included, and IR filter enables use in heat... Read More

Electrical Equipment & Systems

High Intensity Luminaire suits vessel lighting applications.

Nov 05, 2010

Utilizing halogen lamp and parabolic reflector, Lumiglas® Lumiflex Fiber Optic Ex-Light, Model USL08 LF-Ex delivers 1,950 lux output and provides up to 6,000 hr of operating life. Unit is suited for use with light/sight port combinations, or separate sight glasses and light ports. With IR filter located between bulb and fiber optic bundle, luminaire is able to output cool light. Product... Read More

Electrical Equipment & Systems, Optics & Photonics, Test & Measuring Instruments, Vision Systems

Fiber Optic Light Source provides 1-4 output wavelengths.

May 06, 2010

Suited for telecom maintenance and CATV fiber optic lab testing, Model 3109 produces 650 nm red source, 1310/1550 nm wavelengths for single mode fiber, or 850/1300 nm wavelengths for multi-mode fiber. Handheld unit features CW and 2 Hz modulated frequency outputs at 650 nm and CW, 270 Hz, 1 kHz, and 2 kHz at other wavelengths. Typical output power is -7 dBm for LD and 20 dBm for LED at stability... Read More

Electrical Equipment & Systems, Health, Medical, & Dental Supplies and Equipment

Fiber Optic Illuminator assists orthopedic surgeons.

Feb 25, 2010

Comprised of flexible acrylic fiber optic panel that adheres to retractors, Ortho-Light(TM) delivers bright, shadowless, continuous area light, optimizing visualization in small-incision hip, shoulder, or knee surgeries. Disposable, single-use device is sterile and latex-free. Unit attaches to retractor using biocompatible, 2-sided adhesive and inserts directly into surgical cavity. Read More

Electrical Equipment & Systems, Optics & Photonics, Vision Systems

Laser Combiner suits confocal and fluorescence microscopy.

Dec 03, 2009

Intended for cell biologists, Model MLC400 brings complex monolithic optic design technology and fiber coupling capability into complete laser illumination solution. Factory-aligned optical structure will not drift out of alignment due to environmental factors such as temperature changes or vibration. Configured with acousto-optic tunable filter as well as DPSS and diode lasers at 405, 488, 561,... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Optics & Photonics, Vision Systems

LED Fiber Optic Illuminator suits medical/industrial markets.

May 20, 2009

LED Fiber Optic Illuminator is offered as energy efficient, maintenance-free alternative to halogen-based and metal-halide fiber optic illuminators. Utilizing optical light engine designed to couple high intensity white light into 3-10 mm fiber optic bundles, it is suited for applications including endoscopy, microscopy, and machine vision. Color temperature of LED light will not change when... Read More

Electrical Equipment & Systems

Lumitex® California-Based R&D Center Offers Optical Fiber Illumination Technologies with Volume Manufacturing from Asia

May 14, 2009

Irvine, CA, May, 2009 - Lumitex®, Inc. announces the establishment of its West Coast R&D Center in Irvine, California, and Asian manufacturing center in Taipei, Taiwan to help develop, apply and produce illumination solutions using patented LED and fiber optic technologies for electronics applications on the West Coast and in Asia. "Lumitex West, formerly Poly-Optical Products, provides... Read More

Electrical Equipment & Systems

Illuminators target medical and industrial applications.

Jan 27, 2009

Compact LB24 suite of Solarc® metal halide fiber-optic illuminators produce over 500 lumen output, 5,000°K color temperature, and 90+ CRI while providing operating time of 500 hr. Measuring 5.8 x 3.5 x 2.8 in. and weighing 1.2 lb, 2.2 lb with power supply, units include threaded input port for custom adapters and are available with ACMI and other fiber-optic couplers. Devices also include... Read More

Electrical Equipment & Systems

Backlight features telecentric lens design.

Oct 08, 2008

Using parallel rays, Telecentric Backlight Illuminator eliminates parallax errors, making it suitable for machine vision applications that need to measure edges. Silhouetting object provides high contrast for optimal edge detection while minimizing unneeded surface detail. Compatible with Silver Series Telecentric measuring lenses, illuminator accepts ¼ in. fiber optic light guides or 0.312... Read More