Phoenix Contact    Harrisburg, PA 17111 0100
Feb 21, 2012 Available for RBO 5/RSC 5 modular feed-through terminals, Carrier 35-13 Kit and Carrier F-13 Kit provide short circuit capability for current transformer applications. Carrier 35-13 supports DIN rail-mounted terminals, while Carrier F-13 suits panel-mounted terminals. Both include 4 shorting screws, 1 bridging bar, 4 isolators, and 1 carrier to hold 4 screws when not in use. Offered in 9 and 13 mm pitches, RSC/RBO terminals are rated 600 V and either 30 or 45 A.

Crouse-Hinds Div., Cooper Industries, Inc.    Syracuse, NY 13221
Feb 17, 2012 Designed to fit existing cabinet space and wiring configurations, ZoneIT provides pluggable module that lets users upgrade surge protection for new and existing traffic controllers. It employs 3-stage hybrid circuitry, delivering protection with 3 outlets. Primary stage offers 50 kA protection to entire cabinet, while secondary stage includes RFI filtering and ensures electronics are fully protected. Additional features include thermal overload, over-current, and short circuit protections.

Electro Standards Laboratories    Cranston, RI 02921 3403
Feb 17, 2012 With PathWay® Model 7296, user can share 2 single-port MDR interface devices and 2 single-port MXR interface devices among 2 other devices for each channel. All 4 channels are switched simultaneously via front panel pushbutton or via serial remote control operation. With USB Type-A connector on rear panel that accepts ASCII RS232 serial data commands, user can control switch position, lockout front panel operations, and obtain switch status from remote location.

Maxim Integrated Products    Sunnyvale, CA 94086
Feb 17, 2012 In addition to proprietary charger adapters from Apple and Sony, Models MAX14578E/MAX14578AE detect USB standard downstream ports, USB charging downstream ports, or dedicated charger ports. When charging port is detected, devices will control external lithium-ion battery charger controller to optimize charge time and efficiency. On-chip LDO provides 5.3 V output, which can be used to power USB transceiver. Operating from -40 to +85°C, ICs offer ±15 kV HBM ESD protection on USB data pins.

W.A.C. Lighting Company    Garden City, NY 11530
Feb 16, 2012 Energy efficient LEDme® Wash Light is 120 V track luminaire that can be dimmed down to 1% with electronic low voltage dimmer. It is offered in 20¾ in. long, 10 W models and 32 5/8 in. long, 19.4 W models with color temperatures of 3000K and 4000K. Wash light offers 114° symmetrical wide-angle beam spread and 0-26° vertical aiming adjustability in either direction. With height of 1 7/8 in., luminaire features an integral electronic transformer and can be mounted 1-3 ft from wall.

W.A.C. Lighting Company    Garden City, NY 11530
Feb 16, 2012 For residential, retail, and hospitality applications, Orillion melds old world European craftsmanship with contemporary color and classic profile into mouth-blown Italian Opaline glass pendant defined by subtle spiral pattern of sparkling dimples. Each 3.75 in. tall x 7 in. wide pendant includes shade, socket set, adapter, and lamp. Different options allow operation with 5 W LED featuring 3500K color temperature; 50 W halogen source; or 120 V, 50 W xenon lamp.

Dialight Corp.    Farmingdale, NJ 07727
Feb 16, 2012 Designed for both indoor and outdoor industrial lighting applications, 17,000-lumen, 170 W DuroSite® LED High Bay luminaire provides instant-on capability that allows units to be paired with an occupancy sensor and/or dimmable components. Units operate on an integrated universal power supply at 100-277 Vac, and are designed for change out from HID light sources, such as metal halide and high pressure sodium. Product is IP66 certified for use in outdoor and washdown locations.

Atmel Corporation    San Jose, CA 95131
Feb 16, 2012 With internal lighting timing algorithms, MSL2164 and MSL2166 eliminate 3D ghosting and flickering effects on LCD TVs. Drivers work with Atmel AVR® MCUs, which process timing and dimming instructions. Able to drive up to 16 parallel strings of LEDs, products incorporate power management and backlight control along with multiple dimming modes for 3D, scanning, and zone dimming edge-lit LCD TVs. Multiple PWM modes reduce design complexity.

TE Connectivity Ltd.    Berwyn, PA 19312
Feb 16, 2012 Suited for consumer, auto, and other markets with products using high-speed interfaces such as USB 3.0/2.0, HDMI, eSATA, DisplayPort, and Thunderbolt, single- and multi-channel devices help protect against damage caused by ESD, surge, and cable discharge events. Respective bi- and uni-directional capacitance values of 0.10 and 0.20 pF typ delivers to low insertion loss, which helps maintain signal integrity. All devices deliver ESD protection of 20 kV air and contact discharge.

Basler Electric Co.    Highland, IL 62249
Feb 16, 2012 Combining microprocessor-based platform, fiber optic rectifier bridge firing control, and online maintenance-capable rectifier bridges, Model DECS-2100 provides excitation currents up to 10,000 Adc on systems ranging from 1-1,300 MW. BESTCOMS(TM)Pro GUI software is used for configuring, monitoring, and maintaining control system. Through USB port or optional Ethernet port, local communication between controller and PC operating with BESTCOMSPro software is possible.

Larson Electronics, LLC    Kemp, TX 75143
Feb 15, 2012 Operating from 110-277 Vac with onboard transformer, Model BL-150W-PM utilizes 30 CREE XLamp XPG® 5 W LEDs with PWM drivers to produce 14,790 lumens. Unit incorporates IP68-rated waterproof LED light assembly within aluminum pedestal-mount platform suited for damp and abusive conditions. Lens is formed of unbreakable polycarbonate and sealed to housing for waterproof protection. Operating for up to 50,000 hr, portable light includes 50 ft of abrasion-resistant cord with straight blade plug.

Siemens Industry, Inc.    Elk Grove Village, IL 60007
Feb 15, 2012 Featuring quick-connecting plug-in terminals to facilitate installation, Sinamics G120C operates and controls induction motors. Unit includes port for memory card and can also be configured using PC via USB interface. Dual safe inputs control Safe Torque Off function without need for external devices. For network communications, Sinamics G120C supports Profibus, and can also be directly integrated into other communications structures via USS protocol, ModBus RTU, and CAN Open.

Allegro MicroSystems Inc.    Worcester, MA 01615
Feb 15, 2012 Supplied in eMSOP-10 or eTSSOP-16 package with integrated current-mode boost converter, internal power switch, and current sink, single-output A8513 backlights LCDs in automotive/consumer designs. Driver can operate from single 4.5-40 V power supply to accommodate start/stop, cold crank, and load dump requirements, and 2 MHz boost converter switching frequency enables operation above AM radio band. Fault flag can be used as part of circuit to drive external P-FET to disconnect input supply.

GlacialLight    New Taipei City 235, R.O.C  Taiwan
Feb 15, 2012 Consuming 12 W, 6 in. Capella GL-DL06D comes in 2 models supporting 90-132 V and 180-264 V, respectively. All-in-one bulb and fixture operates for minimum of 30,000 hours with no perceptible flickering. Intended for indoor use only, dimmable down light provides 120° beam angle and greater than 80% power conversion efficiency. Unit contains no hazardous chemical such as mercury, and does not emit harmful UV or IR rays.

Elemental LED    Emeryville, CA 94608
Feb 15, 2012 Designed to fit into any standard light switch wall outlet, Reignbow LED Color Selector provides dual-slide dimmer and color picker. Slider on left allows user to dim RGB LED lights, while slider on right lets user choose one color of light to display. Color picker moves through all colors in spectrum, and PWM dimmer enables simultaneous 0-100% dimming. Reignbow is suited for customers who want colorful LED lighting, instead of color-changing LED lighting.

Green Watt Power    Concord, CA 94520-4841
Feb 14, 2012 Comprising 6 models, GLC-150 Series has universal/full range AC input voltage of 100-277 Vac. Available constant current outputs are 2.8, 3.2, 3.75, 4.2, 5.0, or 6.25 A, with self-adjusting output voltage from 15-54 Vdc range in various models. Supplied in IP67 extruded aluminum metal case that measures 8.98 x 3.15 x 1.78 in., RoHS-compliant products deliver efficiencies in 93% range, offer active PFC greater than 0.90, and integrate protection circuitry.

Vista System    Sarasota, FL 34234
Feb 14, 2012 Offering low-voltage alternative to illuminating Vista Light products, LED illumination kit consists of adhesive LED band and power supply. Plug-and-play kit afixes to sign structure along aluminum profiles and end caps, and only adaptation required by end-user is that of plug adaptor when default electricity plug does not match local outlets.

Larson Electronics, LLC    Kemp, TX 75143
Feb 14, 2012 Designed for operation in wet and corrosive environments, Halp-emg-48-2l-led instantly provides up to 90 min of emergency illumination during power failures via integral battery backup system. Class 1 Division 2 emergency LED light is constructed with glass fiber reinforced polyester housing, poured sealing gasket, impact-resistant acrylic diffuser, and stainless steel mounting hardware. At 4 ft long, light can operate with voltages from 120-277 Vac and uses lamps with 50,000 hr life.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Feb 14, 2012 Featuring universal input of 90-264 Vac, Models XCSL85C, XCSL120C, and XCSL240C are 24 Vdc power supplies available in 3.5, 5, and 10 A, respectively. Pluggable connections facilitate installation and meet stringent CE requirements. Adjustable output voltage protects against input of surges coming from DC line and caused by inductive loads.

Telect Inc.    Liberty Lake, WA 99019
Feb 13, 2012 Available in dual 10/10 and dual 20/20 configurations, 60GMT series features universal ±24/-48 Vdc operating voltage to fit in legacy and next-generation network applications. Lever-actuated input connectors provide tool-free termination while screw clamp output, ground and alarm connectors ensure security. Panel is designed for network locations such as wireless, co-locate and remote sites, with 1RU chassis model featuring integrated 19 in. mounting ears, 2 in. depth, and weight of 4 lbs.