Hibino Corp.
Tokyo 108-0075  Japan
Jul 20, 2006 Featuring 6 mm pixel pitch screen, ChromaLED(TM) 6B series is powered by DLC-612 processor and uses 14-bit color processing. Product comes in standard sizes of 38, 120, 150, and 200 in. as well as custom-designed sizes. Each LED element has black lens, and display offers max transfer rate of 24 Gbps for ultra-wideband serial transmission. Processor maintains compatibility with conventional processors to display 3, 4, 6, or 10 mm pixel pitch screens.

MULE LIGHTING, INC.
Providence, RI 02905
Jul 06, 2006 Wet location/IP 65 rated, Pinnacle exit signs are constructed of 0.420 in. cast aluminum and incorporate clear polycarbonate shield and tamper resistant hardware. Operating off 120, 277, or 347 Vac input in -30 to +135°F temperature range, LED illumination consumes less than 5 W and sealed nickel-cadmium batteries provide 90 min runtime in event of power outage. LED exit signs are suitable for wall, ceiling, or end mounting, and come with field selectable chevrons.

Opto Technology Inc.
Wheeling, IL 60090 6056
Jun 08, 2006 Using 50 die in TO-66 package, Shark OTLH-0480-UV achieves 150 mW of optical power. It offers half max viewing angle of ±54° and features peak wavelength at 365 nm with radiant flux of 150 mW when driven at max peak current of 300 mA. It suits applications that include fluorescence excitation or absorption; document validation; and UV curing of acrylates used in adhesive, polymer, and ink curing. Collimating optics and custom lenses are available.

California Micro Devices
Milpitas, CA 95035
Jun 01, 2006 Current regulated fractional charge pump WLED drivers line includes CM913x/4x series that can drive up to 6 WLEDs, up to 50 mA on each output, with input voltage ranging from 2.9-6 V. Voltage regulated CM915x drivers feature fixed output voltage of 4.5 V with output ripple of <1% and accuracy of 2%. All drivers can operate in both 1x and 1.5x fractional modes.

Global Display Solutions
Bingley West Yorks BD16 1PE  United Kingdom
Jun 01, 2006 Readable in full sunlight with 1,366 x 768 resolution, large screen color TFTs feature frontal Advanced Optical Enhancement (AOE) treatment that eliminates condensation, dust, reflection, and parallax problems. Weather- and vandal-proof units are designed to operate 24 hr/day. For water and dust protection, casing is made to IP65 standard. Diagnostic Interface Board, also included, monitors display status, power presence, and lamp life status.

Opto Technology Inc.
Wheeling, IL 60090 6056
Apr 25, 2006 Incorporating 9 LED chips in compact and thermally conductive ceramic substrate, OTLA-0100 high density, multi-chip LED module offers wavelengths of 380, 410, 460, 500, 525, 575, 615, 655, and 705 nm from UV through Visible Red Spectrum. Applications include fluorescence excitation equipment, colorimeters, blood analyzers, clinical chemistry analyzers, and DNA analyzers.

Optek Technology, Inc.
Carrollton, TX 75006-6905
Mar 23, 2006 Lednium Series of surface mount 10 W 3D LED assemblies are composed of nine 1 W LEDs mounted in 1.3 in. sq anodized aluminum housing with less than .5 in. profile. Assemblies provide parallel-serial connections that enable operation of 3, 6, or all 9 LEDs. Peak pulsed forward current is 3 A with dc forward current of 1.05 A. Forward voltage ranges from 6.3-9.25 V and reverse voltage is 15 V. Units offer 120° viewing angle and are available in amber, blue, green, red, or white.

Advance: division of Philips Electronics North America
Rosemont, IL 60018-5603
Mar 15, 2006 Self-contained systems enable creation of LED-based lighting configurations in various applications. Able to be placed up to 32 ft from power supply and control interface, modules can connect with each other or be embedded into any object or surface to create desired configuration. They come with choice of optics for narrow, medium, and line beams and operate on Advance Xitanium(TM) 40 W driver. Modules come in warm white, cool white, and various colors.

Jerguson Gage & Valve, A Div. Of The Clark-Reliance Corp.
Strongsville, OH 44136
Mar 10, 2006 Suited for transparent level gages, LumaStar Flat Glass LED Illuminator features redundant array of LED lights approximately every ½ in. to ensure that multiple bulbs are available for bright, even distribution of light. Unit enables coverage of up to 4 gage sections and allows use of single illuminator and power supply for majority of level gage applications. Offered in 120 and 240 Vac options, unit is FM approved for use in hazardous environments.

Streamlight, Inc.
Eagleville, PA 19403
Mar 09, 2006 Multi-mode Night Com(TM) Xenon/LED flashlight offers 3 lighting options: 2 Ultra-Bright red or safety green LEDs, Xenon bulb, or 1 low-power red or safety green LED light. Ultra-Bright LEDs offer up to 8 lumens of LED light, 4.8 V Xenon bulb provides 72 lumens of incandescent light, and indicator type LED preserves complete dark adaptation per MIL-1472D. Unit features two 3 V CR123A lithium batteries, polycarbonate lens, O-rings for protection from moisture damage, and wrist lanyard.

Richco, Inc.
Morton Grove, IL 60680
Feb 22, 2006 Designed to fit standard 5 mm, T1-¾ LEDs, Series LEDC contains standard 10° lens angle for LED light transmission control, and neoprene rubber O-ring that protects LED from dust and water. Custom inference angles are also available by special order. Key slot feature and location also help control light transmission.

AgiLight, Inc.
San Angelo, TX 76904
Jan 03, 2006 Offering uniformity of color and glow, BrightLine(TM) LED Tubing features oval-shaped flexible plastic sleeve that can be cut and bent or formed on-site to install in channels or on flat surfaces. Cool to touch, low heat LEDs are available in blue, green, orange, red, and yellow with life expectancy of 50,000-100,000 hr, depending on color. Available in 150 and 90 ft rolls, tubing runs off of 110 V input and can run up to 240 ft in continuous border.

Gemba Solutions
Wolvey le10 3hb  United Kingdom
Dec 14, 2005 Viewed on LCD or plasma screen, OEE IMPACT Andon Score Board provides flexible, user-configurable display driven via PC. After production requirements are entered, software calculates TAKT times and production plan that takes account of planned down-time. Users can view profile of progress throughout shift with visual, on-target indicator that displays relation to target in real-time. Product also supplies historical summary report of performance.

American Bright Optoelectronics Corp.
Chino, CA 91710
Dec 09, 2005 NovaBrite(TM) BWL Focused Beam Series, capable of displaying 6,500 K with 3 W input power in blue, red, green, yellow, and white, is also available as white, 120-lumen unit capable of handling up to 4.0 W. Offering alternative to incandescent and metal halide lighting, LED is available with single domed or flat lens with respective viewing angles of 60° and 120°. Design is available as complete light engine, PCB-mounted unit, mounted onto finned heatsink, or discrete LED component.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Nov 29, 2005 Available in red, red-orange, orange, amber, green, and blue, Series HSMx-A43xx Power PLCC-4 LEDs feature temperature range of -40 to +100°C and are targeted at automotive lighting and outdoor electronic signs and signals. To facilitate pick-and-place assembly, LEDs are packed in EIA-compliant tape and reel. Applications include turn signal lamps, brake lights, instrument clusters, traffic lights, marker lights, and signboards.

Para Light Corp.
Walnut, CA 91789
Oct 31, 2005 Available in heights of 0.30, 0.39, 0.51, and 0.56 in., SMD LED Displays are 0.148 in. thick and come in both single- and dual-digit configurations as well as common anode and cathode versions. Units feature flat-pad design with inner connections, eliminating need for leads and enabling automatic pick-and-place production. Displays operate at currents as low as 2 mA and meet industrial temperature ratings of -35 to +85°C.

Para Light Corp.
Walnut, CA 91789
Aug 10, 2005 Available with single yellow, green, red, or blue E-power LED, LS0615 series has suggested operating current of 150 mA and power consumption of 0.6 W. For extra brightness, 350 mA version with 1 W power consumption is also available. Modules may also be custom-designed for electrical operation. Applications include track-, task-, emergency-, security-, and garden-lighting, as well as flashlights and full-color signage.

LEDtronics, Inc.
Torrance, CA 90505
Jul 20, 2005 Super White STP30XC Hi-Flux StripLED® Modules may be used alone or connected to one another, enabling configuration of channel and reverse-channel letters, signs, and displays. Available in lengths of 6, 12, and 24 in., strips feature 6, 12, and 24 Cool White 7,500 K SpiderLEDs, respectively. Each module includes double-ended connector harness for daisy-chain assembly, and pre-applied strip of 3M® double-sided foam tape for peel-and-stick placement.

Para Light Corp.
Walnut, CA 91789
Jul 14, 2005 Manufactured with UV-free polycarbonate plastic casing, LLVM-000xx series employs red/green/blue (RGB) enhanced-power LEDs for indoor and outdoor applications. Tubes measure 3.15 in. in dia and come in 39.37 or 19.69 in. lengths, with 20 and 10 LEDs, offering total flux of 80 and 40 lumens, respectively. Products come with pre-programmed color changing sequence that can also be programmed to meet individual requirements.

Carmanah Technologies, Inc.
Victoria, BC V9A3S2  Canada
Jul 14, 2005 Edge-Lit LED Stop Sign is compliant with US Federal Highways Administration Manual of Uniform Traffic Control Devices. Light from high-flux, ultra-bright LEDs concealed in sign frame shines vertically through clear acrylic sheet and refracts outwards through sign legend for uniform illumination of sign face. Six foot sign requires less than 15 W, compared to 192 W for fluorescent sign. Retro-reflective construction ensures visibility in event of power failure.