Timer Controls & Controllers

Controls & Controllers

Timing Controller addresses power consumption requirements.

August 18, 2015

Eliminating screen tearing and minimizing stutter and input latency, eDP 1.4 pairs with nVIDIA G-SYNC™ and AMD FreeSync™ technologies for graphic cards to process 3D graphics on ultra-high resolution displays of tablets, notebooks, and monitors. High-speed interface, rated at 5.4 Gbps per lane, supports 4K2K displays and beyond, while PSR (Panel Self Refresh)/PSR2 technology intelligently incorporates CPU/GPU dormant concept that lowers display-related system power consumption. Read More

Controls & Controllers

Solenoid Controller facilitates timed pulse cleaning.

September 3, 2013

Suitable for applications where dust collector filters are pulse-cleaned based on timed intervals, Smart Solenoid STR Controller has timer controls that regulate pulsing embedded within solenoid, eliminating need to wire remote timer board to solenoid tray. Factory settings are 150 ms On time with 30-second Off cycle between pulses. Certified according to ATEX (94/9/EC) Category II 3D, controller may be used with any type of cartridge dust collection system that utilizes diaphragm valves. Read More

Controls & Controllers, Electronic Components & Devices

FRC LCD Timing Controller meets needs of large TV manufacturers.

December 16, 2011

Frame Rate Converter LCD Timing Controller product (FRC T-Con), VFRC-A1, enables large LCD TV makers to offer end-users optimal motion picture performance with reduced artifacts such as blur and judder. Integrating components - FRC, frame memory, and T-Con - in one QFP for 100/120 Hz Full HDTV LCD panels, controller supports both VA and IPS LCD panels and is also available for integration into ASICs. Read More

Transportation Industry Products, Controls & Controllers, Sensors, Monitors & Transducers, Electronic Components & Devices

Time/Frequency OEM Board features remote management via SNMP.

September 19, 2008

With Model EB03 Epsilon Board, hundreds of transmitters can be monitored and configured regardless of their geographic location. Suited for digital broadcast single frequency networks as well as WiMAX infrastructure, compact unit offers fully integrated GPS synchronization solution. RoHS compliant device can also use external 1PPS or 10 MHz as its reference in place of GPS, and switches automatically from one reference to another while minimizing phase jump. Read More

Computer Hardware & Peripherals, Controls & Controllers

Receiver and Timing Controller suits flat panel displays.

May 27, 2008

Available in 100-pin TQFP package, PanelPort(TM) provides digital signal integrity by reducing EMI on monitor or display device interfaces by utilizing spread spectrum clocking technology. Compliant to DisplayPort 1.1a standard, it supports full video interface and security encryption through HDCP1.3. Four lane receiver is capable of supporting up to WQXGA (2,560 x 1,600 at 60 Hz) display mode for monitor panels and two-lane 1,920 x 1,080 at 60 Hz for notebook panels. Read More

Controls & Controllers, Timers & Clocks

Timer Controller has universal power supply.

October 10, 2007

Available in 4, 6, 10, 22, or 32 channels with field-selectable last channel output, Series DCT600 Dust Collector Timer Controller is suited for dust collection as well as pneumatic conveying control systems. Relying on one timer board for on demand or continuous cleaning applications, it accepts 85-270 Vac power. Circuitry synchronizes on-time pulse to power line to achieve pulse stability of ┬▒1 msec. Read More

Controls & Controllers, Timers & Clocks

Timing Controller is designed for machine vision systems.

September 11, 2007

With 8 inputs and 8 outputs, Model CC320 allows accurate timing control for events in production line machine vision systems including component sensing, camera triggering, and reject gate control. Unit uses Ethernet connectivity, allows network-centric approach, and permits single or multiple cameras to be triggered at different times. It can be accessed via built-in web server, string commands from any application program using TCP/IP or UDP, or front panel controls. Read More

Controls & Controllers, Timers & Clocks

Master Controller targets synchronous clock systems.

June 26, 2006

Integrating 58th Minute Correction Generator with Model 7000 Master Controller or Time and Attendance System, Dual Technology Master Controller provides correction signals for older technology clocks as well as analog and digital clocks. It includes automatic daylight savings time adjustment, battery backup, and programmable bell schedules. System uses low voltage raceway wiring versus 110 Vac conduit and enables new clocks to be plugged into existing circuits. Read More

Controls & Controllers, Timers & Clocks

Time Correlation Unit speeds debug of embedded systems.

March 25, 2005

Model E5850A gives designers ability to capture real-time oscilloscope signals with up to 13 GHz bandwidth, correlate them to key digital signals on Windows® XP-based logic analyzer, and view them all on one screen. Design engineers can move between logic analyzer and scope as they pinpoint problems through continuous tracking of timing markers between instruments. Seamless integration minimizes time to debug complex digital embedded systems. Read More

Controls & Controllers, Electrical Equipment & Systems

Digital Time Switch is housed in trim enclosure.

June 29, 2004

Housed in streamlined, non-metallic indoor enclosure to deter rust, E100P series single-channel, digital time switches are offered in 24 hr, 120 V input versions with various switching contacts. Products, which include model E101P with SPST contacts, E103P for DPST switching, and E120P for SPDT, provide to-the-minute accuracy, LCD display, power outage battery backup, and 30 A contacts. Read More

Controls & Controllers

Digital Time Switches come in line- and low-voltage models.

March 17, 2004

Series TS-400 turns lights off after preset, user-selectable time out setting. Low voltage Model TS-400 and line voltage Model TS-400-24 feature terminal style wiring and push-button control. LCD indicates time remaining and optional alert warns occupants of impending shut-off. Time scroll option allows users to temporarily override time-out period. Units can also act as override ON or OFF switch for HVAC and EMS systems. Read More

Controls & Controllers, Timers & Clocks

Timer Controller suits low voltage dust applications.

February 18, 2004

Intended for dust collection and pneumatic conveying control systems, Series DCT1000DC eliminates need for external devices such as pressure switches, relays, and timers. Indicating light on control board notifies operators when solenoid valve fails to operate. Controller accepts 10-30 Vdc and comes in 6, 10, and 22 channel models. Modular design allows for use as continuous cleaning control or on-demand cleaning control using optional DCP plug-in pressure module. Read More

Controls & Controllers, Electrical Equipment & Systems

Digital Time Switches feature 40 A contacts.

January 23, 2004

Single-channel Series E100A offers multi-voltage input capability of 120/208-277 Vac. Housed in trim non-metallic, indoor/outdoor enclosure, models are available in 24-hour, skip-a-day, and 7-day versions. Programming can be done from AC or battery back-up power enabling off-site setting. Seven-day models are available with super capacitor power outage back up. Read More

Controls & Controllers

Timer Controller is ideal for pneumatic conveying systems.

November 12, 2002

Series DCT500DC Low Cost Timer Controller provides continuous or on-demand cleaning for receivers and pulse jet systems. DC voltage-only unit features weatherproof enclosure and is available in 4, 6, or 10 channel models. Time-On and Time-Off settings are selected using two potentiometers. For on demand systems where high and low limit control inputs are provided, company Series 3000 Photohelic or Series 1800 Pressure Switch may be used. Read More

  • 1