Dortronics Systems, Inc.
Sag Harbor, NY 11963
Sep 22, 2009 Dortronic's 4900 Series Intelligent Interlock System lets system designers build on standard mantrap configuration and program additional interlock configurations or operation requirements. It can be customized for unique operational requirements and reprogrammed to accommodate future expansion with additional I/O modules. PLC controller initially handles 33 inputs and 33 outputs and can be expanded to accommodate in excess of 128 inputs and 128 outputs.

Analog Devices, Inc.
Norwood, MA 02062-9106
Sep 17, 2009 Models ADM6326 and ADM6346 microprocessor supervisory circuits feature active low push-pull reset output, while ADM6328/ADM6348 have active low open-drain output requiring external pull-up resistor. All models offer 500 nA supply current and provide reset output during powerup, powerdown, and brownout conditions. On power-up, internal timer holds reset for at least 100 ms, which keeps microprocessor in reset state until conditions stabilize. Units operate over -40 to +85°C temperature range.

Berner International Corp.
New Castle, PA 16101
Sep 14, 2009 In addition to temperature/fan speed control, Intelliswitch 2(TM) provides programming and diagnostics capabilities. All functions are supported by microprocessor that features 16 MHz clock speed, 64 kb program memory, 4 kb RAM, and analog/digital conversion. Operating switch, timer/delay, thermostat, and 10-speed fan control are all built-in. Measuring 4 3/8 x 4 1/8 in., RoHS-compliant controller operates with Maxair and Zephyr air curtain models.

Calex Electronics Limited
Bedfordshire   United Kingdom
Sep 10, 2009 Featuring single analog input, PPT245 is configurable for up to 18 sensors/signals, 2 relay outputs, and third output which can be configured either as SSR logic signal or 4-20 mA analog signal. It can be supplied from 24-230 V source (±15%), AC or DC, and provides ON/OFF, PID plus autotuning, and heating/cooling PID control modes. Also offered with PyroEpsilon sensor, controller includes Modbus RTU and loop break alarm, and is also available in IP65 enclosure with clear lid.

Danfoss North America Motion Controls Div. Of Danfoss Inc.
Loves Park, IL 61111
Sep 03, 2009 Reducing operating costs through energy savings as well as reduced maintenance and food loss, AK-CS controls and monitors all major energy-using systems. It monitors energy use with kWh meter installed on main power service and uses Echelon® communications link coupled with modular I/O boards or stand-alone smart controllers. Via central EIS, retailer can look at energy usage across all store locations and create energy baselines for each facility/system.

Maxim Integrated Products
Sunnyvale, CA 94086
Sep 02, 2009 Consuming 125 nA supply current, MAX16056-MAX16059 microprocessor supervisory circuits monitor single system supply voltage. Devices feature capacitor-adjustable watchdog and reset timeouts to simplify product design. Monitoring voltages from 1.575-4.625 V, they operate from 1.1-5.5 V and are specified over -40 to +125°C temperature range. Manual-reset input facilitates testing and units are available in push-pull or open-drain output configurations.

Applied Power Systems, Inc.
Hicksville, NY 11801
Aug 24, 2009 Available in 1-, 3-, and poly-phase circuit configurations, AC/DC converters support voltage range from 50-5,000 V and current from 30-30,000 A. Along with voltage, current, and thermal feedback, options include snubbers, laminated BUS, DC filer capacitors, and output bus bar. Standard versions are available, along with custom models that can be made to end-user specs, for applications that include power supplies, UPS, introduction heating, and welding.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 20, 2009 Supplied in 3 x 3 mm, 10-pin µMAX® package, MAX16055 comes in 10 versions with different thresholds and supply tolerances. Whenever one of 6 monitored voltages falls below its threshold, open-drain reset output asserts and remains asserted for at least 140 msec after all 6 voltages exceed their respective thresholds. Reset output is internally pulled up to VCC, eliminating need for external resistor, but can be overdriven to accommodate other logic devices. Manual reset is also provided.

CTI Electronics
Stratford, CT 06615
Aug 19, 2009 Built to withstand harsh or wet environments, M20U1-N54 Series features one extra-large button that lets operator perform all mouse functions - even while wearing gloves - and Industrial Mouse(TM) joystick. Low-profile N54 joystick knob is sealed in NEMA 4X (IP66) stainless steel enclosure, complete with gasket-sealed bottom plate and rubber feet. Sized to accommodate limited-space applications, pointer is also offered with bulkhead waterproof cable assembly.

CTI Electronics
Stratford, CT 06615
Aug 18, 2009 Designed for hand-held or limited-space applications, M2000-N24 Series incorporates Industrial Mouse(TM) computer mouse pointer in space-saving, 4.21 x 3.06 x 1.53 in. design with 2.05 in. high joystick. NEMA 4X (IP66)-sealed construction withstands harsh or wet environments, and 3 sealed switches perform all mouse functions. Optional backlighting is available for low-light situations, and anodized aluminum M2000 holder is available for storage.

CTI Electronics
Stratford, CT 06615
Aug 18, 2009 Attached to stainless steel bezel for under-panel installation, H20U1-N5 Series combines neoprene gasket with 6-screw mounting pattern, providing NEMA 4X sealing for harsh or wet environments. When combined with low-profile N5 joystick knob, unit can be mounted to panel and operated with thumb. Device is available with choice of 9 different joystick knobs, and has extra large sealed switch that allows operator to perform all mouse functions, even when wearing gloves.

For-A
Cypress, CA 90630
Aug 14, 2009 Offering automatic color calibration and image recognition technology, CEQ-100HS will recognize colors of color chart captured by camera and precisely calibrate it to internal standard color chart and color bar generator. Calibrations can be stored/recalled, and unlimited undo feature can fix incorrect/unfavorable settings. Along with support for multiple HD formats, solution includes HD-SDI and SD-SDI video inputs and outputs.

Cyber-Tech, Inc.
Portland, OR 97281
Aug 10, 2009 Offered with choice of standard, sealed, or proportional switch functions, EG-930 Pro Series Ergo-Grip® comes in ergonomic, die cast aluminum housing that is unaffected by chemicals or UV rays. Proportional Pro-Switch, included, uses Hall-effect technology in environmentally sealed enclosure and provides smooth linear output of 0.5-4.5 Vdc for precise control. Up to 4 switch functions are available in right- or left-hand configurations.

Linear Technology Corp.
Milpitas, CA 95035-7417
Aug 06, 2009 LT3757 DC/DC controller features 2 voltage feedback error amplifiers and reference voltages: 1 for positive output voltages, with 1.60 V reference voltage, and other for negative outputs, with -0.80 V reference. Input voltage range is 2.9-40 V, and LT3757 drives an external N-channel MOSFET from internally regulated 7.2V supply. Features include programmable soft-start, input undervoltage lockout with hysteresis, overvoltage/overcurrent protection, and operating range of -40 to +125°C.

Integrated Device Technology, Inc.
Santa Clara, CA 95054
Aug 05, 2009 Displayport-Based TCON provides power management technology for DisplayPort®-based notebooks with TFT LCD monitors and integrates Power Smart technology into existing IDT PanelPort(TM) solutions. Unit contains VPP1606 embedded DisplayPort timing controller with LED backlight control, VPA2000 power IC that generates 6 different output voltages, and VPA1100 external boost switch providing voltage to drive LED. Functional blocks are integrated to minimize redundancy/optimize performance.

LSI Logic Corp.
Milpitas, CA 95035
Aug 05, 2009 MegaRAID 9200 series SATA+SAS RAID controller cards support SATA, SAS, solid-state, and self-encrypting drives. Units include LSISAS2108 6 Gbps SAS RAID-on-Chip for performance of 2.88 Gbps in sequential reads and 1.87 Gbps in sequential writes. Incorporating 512 Mb 800 MHz DDR2 SDRAM and x8 PCI Express 2.0 host interface, they also support self-discovery/self-configuring expanders. Cards integrate MegaRAID Storage Manager(TM) Java-based software management tool.

KMC Controls
New Paris, IN 46553
Aug 04, 2009 Designed for unitary equipment control or as part of BACnet system, FlexStat(TM) integrated controller and sensor includes built-in applications, selectable through interface, for standard HVAC tasks such as controlling heat pump units, fan coil units, roof top units, and air handling units. Unit also features humidity and occupancy sensing options. Controller has removable back plate that facilitates wiring and installation.

Time Mark Corp.
Tulsa, OK 74116 2019
Aug 03, 2009 Capable of controling up to 3 pumps with 4-20 mA input or 2 pumps with 4-20 mA input and backup floats, Model 42A features alarm inputs for seal failure, over temp, contactor fail and spare, and one alarm output relay. Graphic display shows current depth, liquid level graph with set-points, date/time, and alarm status. Unit has 4 buttons that allow access to configuration settings (password protectable), pump status with run time meters, alarm status, and real-time alarm event logs.

Atmel Corp.
San Jose, CA 95131
Jul 31, 2009 Housed in 0.8 mm ball pitch package, 400 MHz SAM9G45 ARM926 MPU offers integrated power management and slew rate control I/Os with programmable 1.8 or 3.3 V voltage levels. Chip features twin parallel EBI supporting DDR2 DRAM at 133 MHz, 480 Mbps EHCI-compliant USB Host and Device ports with on-chip transceivers, Ethernet MAC, 2 interfaces for MMC 4.3 and SDIO/SDCard 2.0, plus LCD and touch sensing. Consuming 300 µW/MHz, device is suited for data loggers, POS terminals, and alarm systems.

Applied Processor & Measurement
East Amherst, NY 14051
Jul 31, 2009 Model 402 employs RS-232 serial interface for control of output frequency and duty cycle for PWM solenoid and valve applications. Available in non-isolated and electrically isolated versions, unit may be readily interfaced to PCs, PLCs, and control systems for test, development, and OEM applications. Frequency range is 10-1,000 Hz with 1 Hz resolution and 1,000-1,500 Hz with 50 Hz resolution, and duty cycle is adjustable from 0-100% with 0.1% resolution.