Bosch Rexroth Corp.
Hoffman Estates, IL 60192
Dec 06, 2007 Available in sizes of 15 and 25, eLINE Cam Roller runner block for eLINE profiled rail systems provide quiet transport of light loads at speeds up to 12 m/sec. Users can choose between runner blocks in standard length with 4 cam rollers, or short runner blocks with 2 cam rollers. Aluminum eLINE profiled rail system compensates for tolerance errors and unevenness in mounting surfaces. Rails can be mounted from above/below and come in one-piece lengths of up to 4,000 mm.

Graphite Metallizing Corporation
Yonkers, NY 10703
Dec 14, 2004 GRAPHALLOY® yoke style cam followers suit high temperature, low temperature, and submerged applications. They work in temperatures to +750°F and require no grease or oil. Under load, GRAPHALLOY will not soften or extrude. Cam followers, without stud, fit various fixed locations and are available as stock items in roller OD from .75–3.00 in. and roller lengths from .50–1.75 in. Products can also be furnished with crowned rollers.

J. W. Winco, Inc.
New Berlin, WI 53151
Aug 17, 2004 Available in ball lever and hexagon type, Eccentrical, Top Clamping, and Bottom Clamping cam units feature cams and washers fabricated of steel with black oxide finish. Case hardened, nitrided products have threaded bolt and lever arm ball knobs fabricated of black phenolic plastic. Products are self-arresting in any position in order to maintain clamping in angular positions. All three types feature clamping bolts that can be used as stepless adjustable end stops.

Hyson Products, Associated Spring
Brecksville, OH 44141
Jun 01, 2004 Dyne-A-Cam® Models RC2-30, RC2-50, and RCP2-150 provide piercing forces of 30, 50, and 150 kN, respectively. Each can be mounted at any angle, with 50° angle required between user-supplied driver and motion of cam. Units feature precision guiding for off-center loading and upside-down installation, built-in return stroke dampening, and heavy-duty roller bearing to transfer force from driver to cam. Return force on all models is generated by gas springs.

Intech Corp.
Closter, NJ 07624 1333
May 26, 2004 Self-Lubricating Power-Core curved, U- and V-shaped rollers will not wear out rail, and achieve noise reduction of 6–10 dBa over metal rollers. Precision machining provides minimal run-out, while tire material absorbs shock to provide smooth rolling motion and is resistant to chemicals and corrosion. Power-Core rollers operate in temperatures ranging from -60 to +140°F and are suitable for indoor and outdoor use.

Hyson Products, Associated Spring
Brecksville, OH 44141
May 20, 2004 Models HCCU-60 and HCCU-150 in Dyne-A-Cam® Nitro-Cam™ Series are available with respective sizes of 6¾ and 16¾ tons. Products, offered with sensor kits for positioning, can be mounted at any angle in die and retrofit to existing dies. Features include constant force through stroke, built-in mechanical stop for exact cam stroke, and no fluid pressure at die open. Other sizes in series include 1.69 (HCCU-15), 4.50 (HCCU-40), and 10.12 tons (HCCU-90).

Danly IEM
Cleveland, OH 44130
Aug 08, 2003 Milfab® POS-Z-CAM positive return cams come in 4 models rated from 5–15 tons and can be mounted at any angle up to 15°. Suited for high volume production, cams include option of case hardened slide with self-lubricating graphite inserts and soft, large mounting face for punch retainer attachment.

Jergens, Inc.
Cleveland, OH 44110
Apr 29, 2002 Series HDC Heavy Duty Cam Clamps withstand continuous industrial use while providing significant speed benefits over conventional strap clamps in repetitive machining tasks. Styles include both clockwise and counter-clockwise clamping actions, hand or mallet applied actuation, and cam-swing or cam-ram design. Clamping force is from 675 to 11,200 lbs.

Intech Corp.
Closter, NJ 07624 1333
Feb 05, 2002 Quiet-running, self-lubricating Power-Core rollers work in demanding, load-bearing applications where noise, moisture, shock, temperature and rail wear present challenging operating environment. Roller includes long-wearing composite tire with stress-free crystalline structure that resists flattening from compression under static loads. Deformation resistance and internal elasticity provide vibration and shock dampening under dynamic loads.

RBC Bearings
Fairfield, CT 06430
Jan 03, 2002 Cylindrical Roller Cam Followers, available in sizes from 1 to 10 in. diameter, are used in applications throughout packaging, transportation, robotics and automation, and material handling. Contacting lip seals provide positive protection against contamination, while keeping grease inside. Double row cylindrical rollers provide true-running performance. Units are lubricated for life and operate at high rotational speeds.