SICK, Inc.
Minneapolis, MN 55438
Jun 23, 2006 Suited for assembly and picking applications, Pick2Light bin control system offers hand detection and 360°-viewable job LED. Single-sided, retro-reflective light grid features t-slot frame mounting feature. Without restricting bin size, external mounting configuration minimizes damage caused by workers when removing parts or inserting bins. Features include metal housing, 2 m max range, and 5 available sensor heights from 120-420 mm.

Curtiss-Wright Controls Embedded Computing
San Diego, CA 92121-1773
Jun 16, 2006 Available in PMC mezzanine card or half-length PCI card formats, Osiris supports 2 independent radar channels inputs at rates to 16k samples/return. Open standard-based solution supports sampling at frequencies up to 50 MHz on each of its 2 analog inputs, which can be mixed with up to 8 digital radar inputs. Its 64 bit, 66 MHz PCI interface can output 2 streams of radar video directly to host processor, and each stream can be processed using one of 2 sets of trigger and turning data.

Parker Hannifin Hydraulic Valve
Elyria, OH 44036 4026
Jun 15, 2006 Snapped onto DIN rail, Digital Modules for electrohydraulic proportional valves can be configured to function in same way as various individual analog cards. While 3 modules include drivers for directional (PWD00A-400), throttle (PCD00A-400), and pressure control valves (PWDXXA-400), fourth module replaces accessory cards (PZD00A-400). Each unit, configured over RS232 null-modem cable via Parker ProPXD software, accepts download of user-defined custom settings.

Flowserve Corp.
Irving, TX 75039
May 26, 2006 Designed to optimize, control, and protect pumps, pre-engineered IPS Tempo(TM) incorporates variable frequency drive, pump-specific optimization software, industrial-grade electric drive, and menu-driven interface. System adjusts pump operations for flow, pressure, temperature, and fluid level changes, as well as monitors process variables and pump power. It helps eliminate downtime caused by dry running, blocked lines, pump overloads, and cavitation.

Halogen Valve Systems Inc.
Irvine, CA 92614
May 23, 2006 Hexacon(TM) Model II control system closes up to 6 Eclipse(TM) actuators on toxic gas cylinder and ton container valves when activated by panic buttons or remote gas sensors. Model II computer system applies 30 lb-ft of torque for test closures and 50 lb-ft of torque for emergency closures of cylinder valve. SCADA systems can be provided with actuator closure status and error codes to analyze problems and take appropriate corrective action.

Anver Corp. - Anver.Com
Hudson, MA 01749
May 15, 2006 Designed for VT-Series vacuum tube lifters, Hummingbird Control provides precise up/down movement by rotating red hand grip and hovers in place when released. Featuring valve that operates smoothly without springs, control and lifter can handle varying weight loads up to 400 lb, and requires no adjustment. Control is offered in compressed air and electric powered versions.

TAC
Carrollton, TX 75006
Apr 27, 2006 Fan coil version of Xenta 121 can be used in 2- and 4-pipe installations and configured for use with variety of valve actuators, while heat pump model handles reversing and isolation valves and can be configured for up to 3 compressors. Demand-based, multifunctional fan control program handles multistage and variable speed fans for optimal comfort. Exception Modes allow users to pre-configure different modes to override normal control in case of specific event.

Pepperl + Fuchs, Inc.
Twinsburg, OH 44087 2245
Apr 03, 2006 Enviro-Line Series provides solution for pressurization applications in non-hazardous areas that contain dusty, dirty, and corrosive atmospheres. Systems are designed and delivered complete and ready to install, complete with fastening hardware.

Bimba Manufacturing Co.
Monee, IL 60449 0068
Mar 30, 2006 Designed for maximum air pressure input of 125 psi, High Flow Booster 2:1 is available in 4 in. bore size that results in maximum cylinder output pressure of 250 psi. Compact design, with body and center section made of aluminum hard coat with PTFE, suits applications with limited space. Product handles operating temperatures from 15 to 160°F and is designed for intermittent use, such as maintaining pressure in reservoir.

SPX Process Equipment
Delavan, WI 53115
Mar 06, 2006 With screw-on acrylic top and stainless steel base, 2-piece valve control module for W-Series Single and Double Seat Valves has 3 set-screws that secure it to actuator. It accommodates current switch options including Set & Forget switch that provides up to 3 24 Vdc outputs, as well as As-I, and DeviceNET. Available with up to 3 solenoids, extra solenoids can be used to power nearby valves. Seat wear option is available for single-seat valves.

Rockwell Automation
Milwaukee, WI 53204
Nov 29, 2005 Open Type Vacuum Starters, Vacuum Combination Starters, and Vacuum Pump Control Panels feature sealed contacts that help prevent dirt, residue, and other contaminants from causing premature wear to contactors or interference with mechanical operation. Sealed vacuum technology creates low-ion environment that is pure and constant, minimizing arc-to-ground failure. Starters and control panels are suited for applications that require heavy-duty cycling of motors.

Emerson Process Management
Austin, TX 78754
Nov 29, 2005 Designed for Mobrey ULT ultrasonic level transmitters or any HART-enabled field device, SCU Multi-Controller enables operator to program and view real-time readings from up to 15 transmitters from central control room. It is compatible with HART-compliant 2-wire and 4-wire units and has integrated LCD panel for variety of display functions. Output options include 4-20 mA and relays, which are programmed via 6-button keypad housed in IP65 enclosure.

Sensor Electronics Corp.
Minneapolis, MN 55436
Nov 28, 2005 Using LED to indicate increasing danger levels, controller displays digital readout of gas concentrations in PPM or percentage LEL ratios. It works with sensors that monitor ~100 toxic, flammable, or explosive gases. Sensor can be used in explosive or asphyxiating atmospheres while controller is located in safe area up to 3,000 ft away. Integral relays can trigger alarm lights and sirens as well as flash warnings to remote security offices.

R & M Energy Systems
Willis, TX 77378
Nov 25, 2005 Guardian(TM) SRP provides digital solution for control of all forms of reciprocating artificial lift systems. Used with new/existing pumping solutions, it integrates motor control, speed optimization, logic, pump fill control, and rod load control into one unit. Control also offers power and production monitoring and control as well as fluid level monitoring and control capabilities. It determines polished rod and down-hole pump position, velocity, and load.

Flowserve Corporation
Irving, TX 75039
Oct 10, 2005 Designed to handle seating and unseating force of high-pressure gate and globe valves found in power plants, MT Series is available in torque ranges to 8,000 lb-ft and thrust ranges to 325,000 lb. With ductile iron bevel gears and thrust base housings, units withstand elevated process temperatures. Operator stem nut is shouldered in drive sleeve to capture thrust forces within thrust housing without transferring forces to torque housing.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Sep 29, 2005 Housed in standard ¼ DIN package, Series MPC Jr. Pump Controller offers 1- or 2- pump control with built-in alternation, process input retransmission, and high/low alarm contacts. Display provides process indication in any unit as well as alarm indication. Front face is weatherproof for outdoor mounting. Designed for use with any style level transmitter, unit includes 24 Vdc transmitter power supply and analog outputs that can be used with external pump run-time meters.

Bronkhorst High-Tech BV
NL-7261 AK   Netherlands
Sep 28, 2005 Combined with integrated or close-coupled control valves, IP65-rated IN-FLOW Series measures and controls gas flow within range of 0.2 ml_n/min to 11,000 m³_n/h air-equivalent. Units are ATEX approved for use in Category 3, Zone 2 hazardous areas. Basic PC board contains all general functions including alarm, totalization, and diagnostic functions, as well as analog I/O signals and RS232 connection. DeviceNet(TM), Profibus-DP®, Modbus, or FLOW-BUS protocol can be added.

Fluid Metering, Inc. (FMI)
Syosset, NY 11791
Sep 12, 2005 Suited for V-Series Metering Pumps, Model V300 offers variable control of fluid flow from 0""4 l/min in forward and reverse direction. Adjustable in 0.1% increments, membrane switches can start and stop pump without re-adjustment of stroke rate settings. Stroke rate can be controlled electronically through interface, which accepts 4-20 mA, 0-5 Vdc, and 0-10 Vdc input signals. Electronics are housed in anodized enclosure suited for bench top and wall mounting.

ITW Ransburg Electrostatic Systems
Toledo, OH 43612
Aug 25, 2005 Used in single- or multiple-component applications, RCS 2 is suited for precise electronically controlled gear-pump metering and mixing. It features magnetically coupled metering pumps that eliminate shaft seal leaks and provides absolute on-ratio gear-driven 1, 2, or 3 k mixing and metering control. In addition to solventborne or waterborne materials, system can also be used with rotary atomizers, bells, disks, and electrostatic or non-electrostatic guns.

Entegris Semiconductor
Chaska, MN 55318 2342
Jul 19, 2005 Model NT® Integrated Flow Controller helps semiconductor equipment makers enable chemical handling and blending as close to point of use as possible. DeviceNet™ communications protocol delivers diagnostics for monitoring, trouble-shooting, and problem-solving, helping to keep fabs up and running.