
ComNet's Gen 3 NW1 Offers Performance and Increased Stability in Applications where Interference is a Challenge
Increases throughput up to 240 Mbps, adds a 10/100/1000Mbps port and pass-through PoE. Channel spectrum widths available on the NW1 series of radios gives option of narrowing channel bandwidths. Designed for extreme conditions, extended operating temperature range as well as for resistance to water and dust intrusion.
Read More »
New VPX752 Processor Module Provides 32 GB of DDR4 Memory with ECC and Flash for The OS
Based on the Intel 5th generation Xeon-D processor, the efficient SoC design has low power consumption and integrated PCH technology. Provides quad 10GbE XAUI on P1 and PCIe Gen3 x16 (dual x8 or quad x4) on P2, together with quad GbE to P4. Available in a range of temperature and shock/vibration specifications per ANSI/VITA 47, up to V3 and OS2.
Read More »
New APC NetBotz Monitoring and Management System Eliminates the Need for Rigid Cabling Infrastructure
Consist of NetBotz Rack Monitor 750 and the NetBotz Camera Pod 165. Enables facility and IT managers to protect edge data centers and maintain appliance. Provides IT professionals with visibility and monitoring needed for contending with physical and environmental threats.
Read More »
New Expansion Module for Vocality RoIP Provides an Important Migration Path from Traditional Push-to-Talk Radios to Push-to-Talk over Cellular
Adds an additional four audio ports, four serial ports and a general-purpose input/output through a single USB connection. Two RoIP Connects can be used for increased capacity with no additional cabling or power sources. Create up to a 12 port Radio over IP 19" 1u rack solution.
Read More »
7 Steps to Optimize Your Spring Design for Your Next Project
This white paper provides an in-depth overview into how to optimize a compression spring design in seven steps.
Read More »
New Graphic Module Integrated with ZETTLER's Patented Driver Logic Technology
Features TFT LCD logic (3.5" and 5"), while utilizing a monochromatic LCD graphics driver. Ideal for outdoor applications and offer an easy connection and plug-in replacement. Provides high contrast, improved viewing angles and more display color options.
Read More »
SCHURTER's New DG12 Series Power Entry Integrates an IEC Inlet, Circuit Breaker and Mains Filter
IP67 unit features a recessed 2-pole ON/OFF rocker switch circuit breaker with 1- or 2-pole overcurrent protection. Current ratings range from 0.05 A to 15 A. Mounting options include snap-in or screw-mount, front or rear panel with top/bottom or side flange.
Read More »
New RoHS Compliant RFS1090A-LF is a Fully Integrated Synthesizer Operating at 1090 MHz
Designed to deliver an output power of 3۬dBm while operating off a VCO voltage supply of 5Vdc and drawing 35mA and a phase locked loop voltage of 3Vdc while drawing 10mA. Housed in Z-COMM's standard PLL-V12N package measuring 0.6 in. x 0.6 in. x 0.13 in. Ideal for automated surface mount assembly and is available in tape and reel packaging.
Read More »
Avalue Releases ESM-APLM and EEV-EX15 Computer-On-Modules Ideal for Small Handheld Devices
ESM-APLM supports newest Intel® Gen9 Low Power graphics, up to 4K resolution and H.265 codec. Equipped with Intel® Apollo lake Pentium® N4200 2.5GHz / 6W and Celeron® N3350 2.4GHz / 6W SoC processors. Supports onboard DDR3L memory for up to 8 GByte at 1866MT/s.
Read More »
New RX24T G Version and RX24U G Version MCUs Operates in High-temperature Spaces and on Hot Circuit Boards
RX24T covers 11 models with pin counts ranging from 64 to 100 pins and memory sizes from 128 KB to 512 KB. RX24U covers 6 models with pin counts ranging from 100 to 144 pins and memory sizes from 256 KB to 512 KB. Both MCUs support operating temperatures ranging from −40°C to +105°C.
Read More »
New MitySOM-A10S and MitySOM-5CSx Features Intel/Altera Arria 10 SoC and Intel/Altera Cyclone V SoC Processor Respectively
MitySOM-A10S and MitySOM-5CSx will be displayed at Embedded World Exhibition in Hall 4 / 4-180 and Hall 3A / 3A-528. MitySOM-A10S features on-board power supplies, two DDR4 RAM memory subsystems, micro SD card, a USB 2.0 on the go (OTG) port and a temperature sensor. Used for applications in industrial, medical, broadcast, utilities, defense and other markets.
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »