Norbain Security    Wokingham, Berkshire   United Kingdom
Jul 09, 2008 With ability to operate autonomously with peer-to-peer communication, independent of network or PC workstation, Intelli-M eIDC provides fully distributed intelligence from access control and alarm monitoring. It can work independently with its embedded Web server or with several Intelli-M eIDC controllers through server-based Intelli-M Supervisor Plus® security management software. Built-in line status indicators allow verification of connections to peripheral equipment.

Linear Technology Corp.    Milpitas, CA 95035
Jul 09, 2008 Utilizing constant frequency current mode architecture, Models LTC3564EDBC and LTC3564ES5 synchronous buck regulators operate from input voltage range of 2.5-5.5 V. They offer constant 2.25 MHz switching frequency, ±2% output voltage accuracy, current mode operation, and low dropout 100% duty cycle operation. Available in 2 x 3 mm DFN-6 or ThinSOT package, units achieve 20 µA of no load quiescent current and less than 1 µA in shutdown through automatic Burst Mode(TM) operation.

WEG Electric Corp.    Duluth, GA 30097
Jul 08, 2008 Based on DSP control, WEG SSW07 soft starter provides both low inertia start and high breakaway torque load start, and limits initial voltage drop while avoiding high current spikes or inrush current. Built-in bypass minimizes power losses and heat dissipation in thyristors and operates at ambient temperatures up to 55°C without down grading or current reduction. With 1.3-5 kg weight, unit is available in sizes ranging from 162-276 mm high, 95-223 mm wide, and 157-220 mm deep.

Trapeze Networks    Pleasanton, CA 94588
Jul 08, 2008 With Advanced Access Control plug-in, SmartPass(TM) v7.0 lets administrator set access based on location, time of day, identity of user, SSID, VLAN, and/or accounting data. Location-based Authentication/Access Control plug-in enables administrator to set rules to permit or restrict access, allocate bandwidth, and allow resources all based on location. SmartPass maintains per user statistics, lifetime session counts, traffic details, and total traffic passed for user session or specific device.

Digital Monitoring Products    Springfield, MO 65803
Jul 07, 2008 Available in 2 models, XT Series(TM) Burglary/Fire/Door Access Panel Includes network, cellular, and dialer communications, as well as 2-way wireless receiver on single board. Model XT30 supports 10 on-board and 20 additional zones and includes dialer, while XT50 comes with/without dialer, supports 10 on-board zones, and has 20 wired and 40 wireless zones for up to 50 total zones. Users can receive email or text messages each time any system event occurs, such as arming/disarming.

Technical Manufacturing Corp.    Peabody, MA 01960
Jul 07, 2008 Suited for small precision instruments, particularly those instruments in buildings where floor vibration is severe, TableTop PZT(TM) is active hard-mount bench-top vibration cancellation system that has up to 300 lb payload capacity. Incorporating STACIS® technology, it features extended stroke piezoelectric actuators and both vertical and horizontal sub-Hz vibration cancellation, and has no soft air suspension.

Bodine Electric Company    Northfield, IL 60093
Jul 03, 2008 Operating from single-phase 115 or 208/230 Vac line voltage, Pacesetter(TM) 2994 and 2998 ac motor speed controls can drive 230 Vac, 50 or 60 Hz, inverter-duty, 3-phase gearmotors and motors ranging from 1/8 to 1 hp. Model 2994 features multifunction keypad, 4-digit LED display, 6 LED indicators, on/off switch, and speed potentiometer. Housed in NEMA-1/IP40 enclosure for basic environmental protection, Model 2998 is UL and CE certified with built-in RFI (EMI) filter.

Omega Engineering, Inc.    Stamford, CT 06907
Jul 02, 2008 Featuring universal input, single relay output, digital input for remote reset, timer, and register, CN6221 Series can be configured as high or low limit controller. Targeting water, chemical, plastics, automotive, and food processing industries, 1/16 DIN limit controller is suited for situations where high/low limit shutdown or alarm is required for general temperature control. Optional features include multi-function 2 alarm outputs, retransmission output, and RS485 communications.

Sprint Electric Ltd    Arundel East Susse BN18 0BE  United Kingdom
Jul 02, 2008 Offered with both 2 and 4 Quadrant options, PL/X range of 12-1,050 A digital dc drives include 40 character alphanumeric backlit displays, range of software blocks, and fully controlled field for extended speed range. They offer range of communications that support motor control applications. Compact units are UL, cUL, and CE approved.

Omron Scientific Technologies Inc.    Fremont, CA 94555
Jul 01, 2008 Offered in EPDM for resistance to ozone and weathering, Model SGE-88 mounts with double-sided tape, while Model SGE-1510 mounts with integrated angle on profile. Units are protected from damage by outer covering of non-conductive rubber that allows actuation angles up to 90°. If moving part with safety edge strikes operator, or vice versa, safety edge is depressed and will send signal to power source to stop. Applications include gates, doors, machines, automatic mixers, and scissor lifts.

Beckhoff Automation LLC    Minneapolis, MN 55337
Jul 01, 2008 Suitable for drives with quadratic load characteristics such as fans and pumps, Model KL2791 Bus Terminal I/O system enables direct connection of small, 1 A, single-phase motors rated 120 V, 60 Hz, in order to achieve setting range for flow rate from 10-100%. Set value for motor speed is specified by 16-bit value, and motor is switched on and off with mains synchronous pattern. Compact speed controller comes in standard bus terminal housing with width of 12 mm.

Atmel Corp.    San Jose, CA 95131
Jul 01, 2008 Compatible with 5 V input supply, AT73C237 Power Management Unit (PMU) generates 4 regulated output voltages with programmable output voltage selection and output current up to 70 mA. Three LDO regulators provide programmable voltage from 1.2-2.75 V required by RF and analog devices, while one 1.8 V regulator is for backup battery/capacitor recharging. Integrated 2-wire interface allows any MCU to program variable LDO output voltages and manage the enable of each LDO.

Strippit Inc.    Akron, NY 14001-1321
Jun 30, 2008 Used on PPEB and Easy-Form series press brakes, CADMAN® Touch combines CNC technology and IR touch screen programming system running on Windows® XP embedded PC-based control unit. It works with LVD integrated intelligent bending database and on-board LVD CADMAN-B 3D (bending) software, creating and storing interactive integrated databases for bend allowance, angle corrections, and spring-back. GUI minimizes control input, lessening steps between drawing to completed part.

Honeywell, Inc., Industrial Automation & Control    Phoenix, AZ 85023
Jun 30, 2008 Experion® allows plant operators to coordinate process control, safety shutdown, as well as fire and gas mitigation steps. In addition to the safety instrumented system integration, this Process Knowledge System helps improve plant operations via embedded simulation capabilities used for operator training and control, display, and procedure validation. It also offers integrated batch functionality to optimize production, as well as reliability for chemical and life sciences companies.

Honeywell, Inc., Industrial Automation & Control    Phoenix, AZ 85023
Jun 30, 2008 Integrated with Process Knowledge System, Safety Manager allows safety and process controllers to communicate with each other without depending on intermediate interfaces or compromising operations security. In sharing information between Safety Manager and Experion C300 process controller, system can provide plant-wide safety instrumented system point data, diagnostics, alarms and events, operator displays, and sequence of event information to any Experion station located in plant.

Micrel Semiconductor Inc.    San Jose, CA 95131
Jun 30, 2008 Including Models MIC69301/2, MIC69151/3, and MIC69101/3 with current ratings of 3, 1.5, and 1 A, respectively, MIC6910x/15x/30x low voltage linear regulators feature single supply operation from 5.5 V down to 1.65 V with ±1% initial output accuracy. ICs have thermal shutdown, current limit, and power handling capabilities. Aimed at industrial, medical, communications, computing, and consumer markets, devices come in thermally-enhanced e-Pad SO-8, MLF®, and S-PAK packages.

L.U.I. PLUS    Jasper, IN 47546
Jun 27, 2008 Available in lever (ADA approved) and knob styles, Biometric locking system delivers functionality based solely on thermal imaging of user's fingerprint to eliminate concerns over forgotten, lost, or stolen keys. Product can also be set to unlocked mode during times when open access is desired. Suited for commercial buildings, system offers administration and audit control capabilities as well as built-in LCD that facilitates enrollment/deletion of up to 1,000 users.

Chil Semiconductor Corp    Tewksbury, MA 01876
Jun 27, 2008 Supporting Intel VR11.x designs that deliver up to 150 A, CHL8100 digital mixed-signal, multiphase, synchronous buck controller can be used with CHL8500 high-frequency dual MOSFET gate driver. Designers can digitally configure switching frequency of each phase from 200 kHz up to 1 MHz. Power Designer GUI can be used to access, set, modify, and monitor parameters, which are stored in embedded nonvolatile memory. Controller uses current balancing algorithm for thermal management.

Mettler Toledo, Inc.    Columbus, OH 43240
Jun 26, 2008 Used to weigh random weight packages as they pass over scale conveyor, IND560dyn EXPRESSWEIGH® Scale Terminal features configurable output that can include avg weight, consecutive number, time and date, package ID, and package dimensions. IND9D56 EXPRESSWEIGH® controller offers connections for photo-eyes and other I/O devices to create complete solution. Both provide 3-zone checkweighing for up to 25 target IDs. Graphical display shows comparison between package's weight and target value.

Zilog, Inc.    San Jose, CA 95126
Jun 26, 2008 EMV and PCI PED pre-certified for POS applications, Zatara(TM) ZA9L1 ARM 9(TM) core-based application-specific standard product (ASSP) suits security-critical applications such as payment, identity, healthcare, access control, e-government, and e-administration. It incorporates 32-bit RISC SoC and on-chip dual-role USB OTG controller and is secured against tampering and other attacks. Other features include Magnetic Card Reader, SmartCard and LCD monochrome controllers, and 76 GPIO.