Mettler Toledo, Inc.    Columbus, OH 43240
Jan 08, 2009 Featuring IP66-protected stainless steel housing, Model IND226x is approved for worldwide use in chemical and pharmaceutical industries. Unit includes 7-segment LED display and over/under control weighing mode for exact container filling. MinWeigh(TM) ensures weighing within acceptable limits, while CalFREE(TM) allows for electronic calibration with weighing modules. Equipped with IND serial data interface and ACM200 interface converter, IND226x can connect to PC or printer via RS232 interface.

Diodes, Inc.    Westlake Village, CA 91362
Jan 08, 2009 Housed in SOT553 package, Model AH5792 integrates bi-directional, H-bridge output stage and pair of push-pull output drivers to source and sink current, making it suited for single-phase, full wave brushless DC motor control. Operating voltage range of 1.8-5 V also caters to miniature DC fans requiring low voltage start-up. To protect motor windings from damage, RoHS-compliant controller includes locked rotor detection and automatic self restart functions.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jan 08, 2009 Housed in thin SOT23-5L package, 250 mA Model SiP21110 features 35 µA ground current at 1 mA load, extending battery run times between charges in battery-operated power systems and portable electronics. Device is designed to maintain regulation while delivering 330 mA typical peak current for systems wigh high surge current upon turn-on. Operating over junction temperature range of -40 to +125°C, unit offers 1.0% output voltage accuracy at +25°C.

Linear Technology Corp.    Milpitas, CA 95035
Jan 08, 2009 LTC4265 suits high-power powered device applications needing up to 25.5 W. Device has ability to recognize power sourcing equipment as either Type-1 hardware (802.3af) or Type-2 hardware (802.3at) and allocate power accordingly. Shutdown pin with signature corrupt provides flexible auxiliary support, and rugged 100 V MOSFET isolates controller and external DC/DC converter during detection and classification, while providing 100 mA of inrush current limiting for smooth power-up transitions.

Linear Technology Corp.    Milpitas, CA 95035
Jan 08, 2009 Including models LT3008EDC and LT3008IDC, LT3008 series of micropower PNP-based LDOs have input voltage ranging from 2.0-45 V with adjustable output voltage ranging from 0.6-36 V. Housed in 0.75 mm 6-lead DFN 2 x 2 mm package with backside thermal pad, external capacitors can be used without need of series resistance. They deliver up to 20 mA output current with corresponding low dropout voltage of only 300 mV. Output tolerance is regulated to within ±2% over line, load, and temperature.

Linear Technology Corp.    Milpitas, CA 95035
Jan 08, 2009 Suited for load dump and cold-crank conditions found in automotive applications, LT3570, 36 V, 1.5 A (ISW) buck and boost regulator combined with linear controller is available in 4 x 4 mm QFN or TSSOP-20E package. Synchronizable up to 2.5 MHz, product has minimum output buck voltage of 0.8 V, and maximum boost output voltage of 38 V. Other features included are programmable switching frequency from 500 kHz to 2 MHz, independent soft-start, and separate VIN supplies for each converter.

Linear Technology Corp.    Milpitas, CA 95035
Jan 08, 2009 Driving external N-Channel MOSFET, LT3751 can charge 1,000 µF capacitor to 500 V in less than 1 sec, suitable for applications such as professional photoflash systems, RF security, and high voltage power supplies. It can be configured for primary-side output voltage sensing, without needing optocoupler. Unit features boundary mode control, VCC input voltage range of 5-24 V, programmable input over/under voltage lockout, and selectable 5.6 or 10.5 V internal gate driver.

Linear Technology Corp.    Milpitas, CA 95035
Jan 08, 2009 Meeting EMI and multi-gigabit SERDES specifications, LTM4606 and LTM4612 attenuate both radiated energy and conducted wideband harmonic energy. LTM4606 operates from 4.5-28 V input supply, regulates outputs from 0.6-5 V, and delivers up to 6 A to load. Operating from 5-36 V input supply, LTM4612 regulates output voltage of 3.3-15 V and delivers up to 5 A to load. Units are housed in 15 x 15 x 2.8 mm LGA package, weigh less than 2 g, and operate at temperature range of -55 to 125ºC.

Curtis Instruments, Inc.    Mount Kisco, NY 10549
Jan 07, 2009 Offering 9 multi-purpose I/O pins in IP65-sealed enclosure, Model 1352 eXM Hydraulic I/O Expansion Module provides 3 analog inputs and allows configurable control of 6 proportional hydraulic valves. All I/O pins can also be used as basic digital I/O. Utilizing CANbus interface, module allows connection to any centralized or distributed vehicle control system that uses CANopen protocol. Additional features include short circuit protection, watchdog circuits, and LEDs for fault identification.

Rockwell Automation / Allen-Bradley    Bloomington, MN 55438
Jan 07, 2009 Engineered to IEC 60439-1 and IEC 60529 standards, CENTERLINE 2500 features ArcShield option to protect against internal electrical arcs, and can withstand arcing durations up to 300 ms. ArcShield provides pressure relief system that exhausts gases through top of enclosure, away from personnel, without front ventilation. Offering 3- and 4-pole bus bar power systems, center includes variable speed drives, soft starters, electronic overload relays, and built-in DeviceNet network.

LEVITON    Melville, NY 11747
Jan 07, 2009 Without requiring any new wiring, self-powered occupancy sensors, remote switches, wall switches, and integrated wireless receivers automatically turn lights on when occupancy is detected and off when room is no longer occupied. Products leverage EnOcean wireless technology and integrate solar cell that eliminates need for batteries by providing power from ambient light in room. Also included, automatic shutoff feature lets users set time-to-shut-off to match precise requirements.

FOSS NIRSystems, Inc.    Laurel, MD 20723
Jan 07, 2009 Analytical and process control solution, XDS Process Analytics(TM) for dairy, helps optimize raw material use in production of various dairy products. In key process stages, sensors are connected to NIR analysis unit that produces continuous flow of measurement results. Software system handles these results and regulates process automatically or helps production operator make required adjustments. Producers can follow what they have in process line at any given time.

DAILY RFID CO.,LIMITED    Guangzhou, 510403  China
Jan 07, 2009 Operating in 125 KHz or 13.56 MHz frequency, RFID Key Fob-01 can be integrated into RFID-based access control system and enables door to be unlocked with single click. Unit has protective overlay made from ABS engineering plastic, which allows tag to survive harsh environments and resist abrasion, impact, and corrosion. Applications include offices, shared residences, and shops.

Unitronics Inc.    Quincy, MA 02169
Jan 07, 2009 Featuring 4 auto-tune PID loops, Jazz Model JZ10-11-UA24 offers 2 Thermocouple/PT100 inputs, 2 analog inputs, and 2 analog outputs, while Model JZ-11-UN20 offers 1 Thermocouple/PT100 input and 1 analog input. Embedded HMI provides 16-key keypad and 2-line LCD text display with up to 60 user-designed screens, 20 graphic symbols, and support for over 15 languages. Communication options include SMS messaging, MODBUS networking, and PC access via MODBUS or OPC.

Semtech Corp.    Newbury Park, CA 91320
Jan 07, 2009 Supplied in 5 x 5 mm package, SC417 high-current POL voltage regulator achieves optimal power density through power circuit layout and matching of driver to internal power switches. It has 3-28 V input range and programmable 150 mA LDO that can be used to provide 5 V for gate drive bias, allowing operation from one rail. Other features include internal crossover circuitry, pseudo fixed frequency adaptive on-time control, SmartDrive(TM) technology, and selectable ultrasonic power save.

IEI Technology Corp.    Taipei Hsien 221  Taiwan
Jan 06, 2009 Available with 10.2 or 12.1 in. wide touchscreen, ALOHA-12A control unit allows access to single computer via VGA/DVI/USB KVMA console. It incorporates 87-key keyboard and TouchPad as well as two 1.5 W speakers, one 300,000 pixel webcam, and one digital microphone. Supplied in ruggedized aluminum die-cast base with IEI IQ VESA Mount design, console can also act as USB hub with its 5 ports and offers on-screen display menus controlled by cap-sensor.

Diversified Technologies, Inc.    Bedford, MA 01730
Jan 06, 2009 Designed for all major transmitter technologies, DTI PowerMod(TM) High Power Solid-State Magnetron Transmitter modules deliver peak RF powers of 3-50 kW and can drive magnetrons across L to Ka band frequency range. They provide RF control to within less than 0.1%; provide 50 ns rise/fall, adjustable from pulse-to-pulse; and support pulse repetition frequencies up to 400 kHz. Measuring 10 x 13 x 9 in., devices include 2 multi-pin circular connectors and 2 BNC connections.

Omron Corp.    Kyoto 600-8530  Japan
Jan 06, 2009 SYSMAC CJ2 programmable controllers include CJ2H CPU units, offered with 50K-400K step program capacities and 160K-832K word data memory capacities. Algorithm lets CPU unit synchronize with high-performance units at regular intervals. Data taken concurrently can be shared between CPU unit and high-performance units, enabling synchronous multi-axis control. Available with 16 or 32 I/O points, I/O units offer 15 µsec ON response time and either 80 or 90 µsec OFF response time.

Bosch Rexroth Corp., Pneumatics Div.    Lexington, KY 40511
Jan 06, 2009 Based on 1 GHz Intel Celeron M processor, IndraControl L65 PAC features reusable code, scalable hardware, and dozens of PLCopen machine functions that are pre-programmed according to IEC61131-3 standards. Unit offers real-time Ethernet, built-in connectivity for networks ranging from Devicenet to Profinet, and 8 onboard I/O slots with expandability for up to 512 I/O on complex machines. In addition, IndraControl L65 can provide 64 axes of motion control.

Carlo GAVAZZI Automation Components    Buffalo Grove, IL 60089
Jan 05, 2009 Offered in 4 frame sizes, GC Series Contactors range from 25-140 A and up to 75 hp at 460 Vac. Units are available with wide selection of AC and DC coil voltages, choice of screw or lug terminals, dual coil terminals, and at least one auxiliary contact. Providing class 10 trip protection for motor loads, matching GT Series Bimetallic Overloads include set of auxiliary contacts, test button and manual or automatic reset, and direct mounting or optional separate mounting bracket.