Linear Technology Corp.    Milpitas, CA 95035
Oct 02, 2009 Suited as companion to high-resolution DACs/ADCs required by instrumentation and test equipment, LTC6655 has noise level of 625 nVp-p from 0.1-10 Hz. Its -40 to +125°C operating range supports automotive and industrial applications, and curvature compensation reduces or eliminates need for system calibration. Load regulation of 3 ppm/mA and ±5 mA source/sink capabilities, coupled with 5 ppm/V line rejection, result in consistent performance across various line and load conditions.

Linear Corp.    Carlsbad, CA 92009
Oct 02, 2009 Adding 8 form C control relay outputs to IEI Max3 or MiniMax 3 access control system, Max 3 Output Module enables customers to handle variety of applications, including elevator control, handicapped door control, and controlling or triggering camera or DVR upon card read or PIN code. Software controlled using Hub Manager Professional v8.0, module includes power LED and individual relay status LEDs, plus ability to specify custom name and time value for each of 8 outputs.

Linear Corp.    Carlsbad, CA 92009
Oct 02, 2009 In one integrated system, eMerge v3.3 provides access control, video management, event monitoring, interactive reporting, and alarm panel interface. It offers expanded system memory for full on-board backups, custom reports tailored to individual needs, and ODBC-compliant database, as well as regional anti-passback and LDAP user authentication.

Schneider Electric    Palatine, IL 60067-7399
Oct 01, 2009 Available in 3 book-size models, Lexium 32 Compact, Lexium 32 Advanced, and Lexium 32 Modular servo drives facilitate selection and adaptation to machine manufacturers' power and performance requirements. All Lexium 32 servo drives come with Safe Torque Off on board as per IEC/EN 61800-5-2. Units are complemented by medium-inertia Lexium BMH and low-inertia Lexium BSH motors, which cover torque range from 0.5-88 Nm.

Pass & Seymour/Legrand    Syracuse, NY 13221
Oct 01, 2009 Available in 3- and 4-wire models, Titan(TM) Commercial Dimmers are used with 120 and 277 V fluorescent dimming ballasts. Units feature surge and static protection, power failure memory, enclosed slider, and matte finish. Low end output voltage can be adjusted without compromising slider's full dimming range. Offered in single pole slide-to-off and single pole/3-way preset versions, dimmers come with all parts needed to build screwless multi-gang faceplate in field.

Cognex Corp.    Natick, MA 01760 2059
Oct 01, 2009 Designed for monitoring In-Sight® vision systems, VisionView v1.2 expands choices available to users for customizing display and capturing application data and adds option to run operator interface on PC. Pan and zoom capability enables close examination of defective parts, and production line operators can download images of failed parts automatically to an external storage device. Parameter changes can be saved directly to existing job or renamed as new job.

Microteknix    Pottstown, PA 19465
Sep 30, 2009 Requiring 2U rack space, Model EPC-2374R serves as primary device for temperature, humidity, and moisture protection. System operates as controller, data logger, meter, event recorder, and early warning system with power fail output and RTD inputs. It is suited for industries such as information technology, automation, broadcasting, telecommunications, and audio control.

JK Microsystems Inc.    Davis, CA 95616
Sep 30, 2009 Providing user with array of I/O devices, seamlessly supported by pre-installed Linux 2.6 kernel, OmniEP Controller features 10/100 Ethernet, 2 serial ports, battery backed clock/calendar, USB, digital I/Os, and stereo audio outputs. Onboard memory includes 16 MB Flash memory organized as Ext2 file system and 32 MB of SDRAM. Optional features include 2 x 16 character LCD, pushbutton front panel, and rugged aluminum enclosure.

Frederick Cowan & Co., Inc.    Riverhead, NY 11901
Sep 29, 2009 CoronaArc circuit incorporates additional high-voltage transformer and supporting diode to create continuous high-voltage DC spark at firing end. Spark current at surface of igniter electrode enables spark gap to be referenced to ground potential and concurrently serve as directed pathway through which stored energy of capacitor discharges high-current arc.

ICP DAS USA, Inc.    Harbor City, CA 90710
Sep 29, 2009 Equipped with PXA270 520 MHz CPU and 5.7 in. TFT LCD touch screen with 640 x 480 resolution, ViewPAC VP-25W1 includes various communications options, such as USB, Ethernet, and RS-232/485, as well as 3 slots for I/O expansion. Windows CE.NET 5.0 OS allows unit to run software programs exclusive to PCs such as Visual Basic.NET, Visual C#, Embedded Visual C++, SCADA software, and Soft PLC. FTP Server and VCEP software allow remote maintenance via Ethernet.

Guden, H. A., Co., Inc.    Ronkonkoma, NY 11779
Sep 29, 2009 Allowing instant access to cabinet interior, Slip Joints comes in various sizes from 1 ½ to 3 in. long and 1 7/16 to 3 in. open width, with either blank leaves or standard hole patterns. Offering alternative to continuous, butt, or slip hinges, Weld-On Hinges have no leaves or fasteners to remove. They come in 12 sizes with options for fixed pin, fixed pin with grease fitting, or removable pin. All removable hinges are available in stainless, steel, and aluminum.

Pericom Semiconductor Corp.    San Jose, CA 95131
Sep 28, 2009 Incorporating PowerNap(TM) technology, PI5USB56 all-in-one USB PowerNap controller allows charging of USB-enabled handheld mobile devices via PC while OS is in sleep mode. Unit includes ESD and Vbus short protection as well as auto-detection and auto-switching support. It also supports USB 1.1/USB 2.0 full- and high-speed specifications as well as sleep-and-charge functionality per USB 1.0, USB 1.1, and YD/T-1591 charger specifications.

Physik Instrumente (PI)    Auburn, MA 01501
Sep 28, 2009 Nanopositioning stage controllers feature USB interface and 24-bit DA/AD converters to work with piezo nanopositioning systems from 1 mm and up. It also includes RS-232 interface and analog interface for compatibility with NI cards. Software libraries and GUIs provide support for LabView, Matlab, and text-based programming languages while programmable data tables allow random waveform generation. Products are available in 1-12 channels and in benchtop, rack-mount, and OEM card versions.

Rockford Systems, Inc.    Rockford, IL 61109 2695
Sep 28, 2009 OSHA and ANSI compliant SSC-3000 solid-state press automation control system is available for part-revolution-clutch mechanical power presses. Rack-mounted modular control system comes with expandable options, allowing changes to be made, or features to be added or deleted as press requirements change. It includes power supply module and main CPU card, and is designed to hold 8 additional cards for expandable options.

Fluke Corp.    Everett, WA 98203
Sep 25, 2009 Enabling users to achieve ±0.125% of reading flow measurement uncertainty, molbox1+ flow terminal performs DAQ and processing functions necessary to determine flow through connected molbloc element. The molbloc-L laminar flow elements and molbloc-S sonic nozzle flow elements are offered in different flow path sizes to cover flow ranges from 1 sccm to 5000 slm. System is viable for in-situ flow meter calibrations because it fits easily on calibration cart.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Sep 25, 2009 Supplied in 64-pin VQFN package, UCD90120 features power supply margining and non-volatile error logging that allow users to diagnose power supply failures in their systems. Level of integration include 12 rails of sequencing; monitoring capability for up to 13 channels of voltage, current, or temperature; and 10 channels of power supply margining. Also included, Fusion Digital Power(TM) Designer GUI enables configuration via PMBus(TM)/I²C interface.

Dortronics Systems, Inc.    Sag Harbor, NY 11963
Sep 22, 2009 Dortronic's 4900 Series Intelligent Interlock System lets system designers build on standard mantrap configuration and program additional interlock configurations or operation requirements. It can be customized for unique operational requirements and reprogrammed to accommodate future expansion with additional I/O modules. PLC controller initially handles 33 inputs and 33 outputs and can be expanded to accommodate in excess of 128 inputs and 128 outputs.

Linear Technology Corp.    Milpitas, CA 95035
Sep 21, 2009 Enabling 340 mV dropout voltage at full load, LT3050 features 2-45 V input voltage range, delivering adjustable output from 0.6-44.5 V. Capacitor at REF/BYP pin allows noise down to 30 µVRMS across 10 Hz to 100 kHz bandwidth. Various diagnostic and safety features are integrated as well as reverse-battery protection, reverse-output and current protection, and current and thermal limiting. Operating with 2.2 µF capacitor, it has quiescent current of 50 µA during operation.

Waukesha Engine Dresser Inc.    Waukesha, WI 53188
Sep 21, 2009 CFR® octane rating units are available with XCP(TM) Digital Octane Panel option, helps increase productivity and consistent inter-operator test results while reducing staff training periods and potential for error. Along with automatically generated data recording and fuel rating files that are stored in MS Excel® format, features include touchscreen GUI that includes prompts, automated calculations, on-screen reports, and data logging capabilities.

Winmate Communication Inc.    San-Chung City   Taiwan
Sep 17, 2009 Based on x86 architecture and Intel Atom CPU, Access Management System provides flexible hardware design and device SDK for users to develop software according to specific demands. System combines rapid data control, RFID, infrared motion sensor, and digital IO technology. In addition to 7 in. LED panel with 16:9 widescreen and 800 x 480 resolution, system has built-in 1.3 megapixel web camera and digital microphone, which provide communication interface to mainframe administrator.