Intersil Corporation    Milpitas, CA 95035
Jan 14, 2010 Using current control architecture, ISL8014A monolithic, synchronous step-down DC/DC converter delivers up to 4 A continuous output current from 2.8-5.5 V input supply. It integrates pair of low ON-resistance P- and N-Channel internal MOSFETs, and 100% duty-cycle operation allows less than 400 mV dropout voltage at 4 A output current. Configurable for discontinuous or forced continuous operation at light load, IC offers SYNC input, fault protection, and 1 MHz PWM switching frequency.

Divelbiss Corp.    Fredericktown, OH 43019
Jan 13, 2010 Based on PLC on a Chip® technology, Micro Bear OEM Controllers include Model ICM-MB-100, featuring 6 digital and 1 analog inputs and 4 dry contact relay outputs, and Model ICM-MB-110, which adds 3 momentary push-button inputs, additional analog input, and 4 digits of 7-segment LED numeric display. Open PCB controllers can be used in place of small, application-specific microprocessor-based control boards and are suited for small system control and monitoring applications.

Interphase Corp.    Dallas, TX 75234
Jan 13, 2010 Featuring 8 T1/E1/J1 interfaces, iSPAN® 3640 supports SS7 MTP2, ATM AAL5, SSCOP, and SSCF protocols; up to 248 SS7 Low Speed Links; 8 High Speed Links; or 248 media channels. This AdvancedMC(TM) T1/E1/J1 Controller, designed for ATCA and µTCA platforms, optimizes system slot usage and provides intelligent interfaces for application platforms that need to connect to TDM/ATM networks. Monitoring software is also included.

CONCOA    Virginia Beach, VA 23454
Jan 12, 2010 Featuring onboard web server and embedded software, IntelliSwitch II(TM) Gas Switchover allows remote monitoring, secure system configuration, and e-mail notification of real-time system status and events. System offers continuous pressure and flow control from liquid or high pressure cylinder sources. It includes NO/NC relay contacts for alarm outputs; internal, switch-settable input ac power selection; and internal delivery pressure adjustment, which eliminates tampering.

Jennic Ltd    Sheffield   United Kingdom
Jan 12, 2010 Model JN5148 wireless MCU is designed for wireless sensor networking applications based on IEEE802.15.4 standard. It includes 32-bit RISC processor, up to 32 MIPs performance, 2.4 GHz transceiver, 128 kB ROM, and 128 kB RAM to support networking protocol stack and user application on-chip. Unit integrates power management and has operating current consumption of 18 mA when receiving and 15 mA when transmitting at +3 dBm. Various peripherals are also included.

Intersil Corporation    Milpitas, CA 95035
Jan 12, 2010 Single-output LNB voltage regulator is designed for supplying power/control signals from satellite STBs to low-noise blocks of single antenna ports. Unit includes current-mode boost converter and low-noise linear regulator, as well as circuitry for tone injection and pin-controllable interface. Final regulated output voltage at cathode of back diode supports operation of antenna port for single tuner, while external modulation input transfers modulated DiSEqC command to output.

Seiko Instruments U.S.A., Inc.    Torrance, CA 90505
Jan 11, 2010 Consuming 9.0 µA during operation, S-11L10 Series features input voltage of 1.2-3.65 V and output voltage of 0.8-3.3 V, selectable in 0.05 V steps. Positive voltage regulator has built-in overcurrent protection circuit, power-off circuit, and discharge shunt function. Ceramic capacitor of 1.0 µF or more can be used as I/O capacitor. Available in SOT-23-5 and SNT-6A(H) packages, IC is suited for power supplies for battery-powered devices, mobile phones, and portable equipment.

GE Co., GE Consumer Products    Louisville, KY 40225
Jan 08, 2010 Incorporating remote-operated circuit breaker and microprocessor controller, A-Series enables automatic, scheduled lighting control or override control based on real-time needs. Panel integrates with native BACnet and Modbus RTU/TCP protocols and allows users to establish and manage load priorities and perform load shedding on command. It also enables daylight optimization for harvesting sunlight, and burn-hour tracking for measuring run-time on lighting loads.

Penny & Giles    Irwindale, CA 91706
Jan 08, 2010 Providing mechanical indication of speed setting, JC120 family of single axis joysticks allow operator to set joystick lever to specific position for driving control system at constant speed without needing to continue holding lever. Center detent position provides indication of lever's middle position, with 3 detents positioned at 10° increments on each side. Measuring only 26.5 mm wide, unit is available with 2 lever heights; 63.75 or 54 mm above mounting panel.

Intersil Corporation    Milpitas, CA 95035
Jan 07, 2010 Operating from 2.2-6 V, ISL80102 and ISL80103 are low dropout linear regulators (LDOs) respectively specified for 2 and 3 A output current. BiCMOS technology promotes optimal performance, which includes transient response rate that ensures output voltage is properly regulated under varying load current changes. Other features include 120 and 81 mV dropout at 3 and 2 A, respectively; adjustable and fixed output voltages from 0.8-5 V; and ±0.5% initial VOUT accuracy.

Microsemi    Irvine, CA 92614
Jan 07, 2010 Featuring PureBLACK(TM) technology, LX6503A(TM) Inverter Controller optimizes black-level quality and dynamic contrast performance in 40 in. and larger LCD TVs. Unit features soft-start capability, fault indication, and flexible configuration support for push-pull, full-bridge or half-bridge drive topologies. Synchronization functionality synchronizes both frequency and phase of lamp current between inverters, or to external signals from variety of sources.

VIA Technologies, Inc.    Taipei 231  Taiwan
Jan 07, 2010 Integrated single chip solution, VIA VL810 SuperSpeed USB hub controller allows single USB port to be used by up to 4 high-bandwidth USB 3.0 devices simultaneously. Upstream and downstream ports are also backwards compatible with previous USB specifications and offer support for hi- (480 Mbps), full- (12 Mbps), and low-speed (1.5 Mbps) traffic. Controller allows devices to communicate latency tolerance to host and enables links to enter low power states when link partners are idle.

Carlo GAVAZZI Automation Components    Buffalo Grove, IL 60089
Jan 06, 2010 Suited for material handling, packaging, and wrapping markets, REC Contactor Series will switch and reverse 3-phase induction motors. Series includes 3-pole version with 3 switched phases or 3-pole version with 2 switched phases; former eliminates direct connections from power supply to motor. Provided with 1,600 Vp blocking voltage option, starter complies with NMFT/NMFT7 requirements and offers standard surge current withstand capability to 800 Ap (1,600 Vp optional).

Carlo GAVAZZI Automation Components    Buffalo Grove, IL 60089
Jan 06, 2010 Able to be used with AC induction motors, VariFlex2-RVDF series employs microprocessor technology that manages to control all drive functions. There are 2 frame sizes available to suit main supply voltages, which include 110/230 Vac for 1- and 3-phase as well as 480 Vac for 3 phase. Compatible with general-purpose asynchronous motor control applications from 0.2-2.2 kW, products are offered in IP20 and IP65 versions with V/F mode and variable torque application.

CTI Electronics    Stratford, CT 06615
Jan 05, 2010 Housed in NEMA 4X/IP66 stainless steel enclosure, M2000-Nx Series features gasket-sealed bottom plate with rubber feet to prevent slippage on dirty, wet surfaces. COTS unit has 8-pin NEMA 4 connection, providing X and Y axis voltage outputs, center voltage reference, and optional 1 or 2 pushbutton voltage outputs. With choice of 8 joystick knobs, unit offers many configurations for precision control of analog devices such as DC motors, stepper motors, and PLCs.

Carlo GAVAZZI Automation Components    Buffalo Grove, IL 60089
Jan 05, 2010 Capable of softstarting 3-phase compressors up to 15 kW @ 400 V, RSBT is suited for scroll compressors mainly used in heat pumps. Three-phase controlled, internally bypassed solution uses auto-adaptive algorithm to reduce energy consumption each time compressor starts by auto-adjusting appropriate parameters. Compliant with EMC Class B (residential) requirements for emissions and UL & cUL Listed, softstarter also integrates phase sequence/imbalance monitoring.

PLX Technology Inc.    Sunnyvale, CA 94086
Jan 04, 2010 Offering low power of 391 mW, dual-port RAID controller OXUFS946DSE bridges 2 SATA hard disks with eSATA, FireWire800, or USB 2.0 serial interfaces. It integrates high-throughput cipher engine that provides real-time encryption and decryption. Unit also offers host application to define and manage user authentication. Power-saving modes include SATA Interface Power Management (IPM), which allows additional power saving when connected to hard disk drives that also support IPM.

infinias, LLC    Fishers, IN 46038
Jan 04, 2010 Intelli-M® Access v1.2 provides access control, photo ID badging, and more while managing infinias Ethernet-enabled integrated door controller. Users can create/manage data, view events/alarms, generate reports, and monitor status of devices via UI from any device capable of displaying fully functional web browser. Along with door/zone schedule override and reset, functionality supports multiple door selection, zone-based cardholder location, and barcode-integrated cardholder reports.

Silicon Laboratories    Austin, TX 78727
Jan 04, 2010 Supporting 4 PoE and PoE+ PSE ports with power levels up to 40 W per port, Si345x Series offers real-time power measurement capabilities, powered device detection, and disconnect algorithms. Each port integrates 0.3 W power MOSFET, current sense resistor, and transient voltage surge suppressor. Housed in 6 x 6 mm QFN package, RoHS-compliant controllers enable PoE/PoE+ Ethernet switches and midspans for multi-radio wireless access points, industrial automation systems, and VoIP phones.

Freescale Semiconductor    AUSTIN, TX 78735-8598
Jan 04, 2010 Optimized for brushless DC motor control applications, 8-bit Series S08MP16 includes industrial and automotive versions with bus speeds of 25 and 20 MHz, respectively. Units feature 3 high-speed analog comparators, 1 KB RAM, 12-bit ADC with PWM hardware triggering, and differential programmable gain amplifier. Two FlexTimers provide selectable input capture, output compare, edge- or center-aligned PWM, dead time insertion in hardware, and fault inputs.