Marvell Semiconductor Inc.    Santa Clara, CA 95054
Feb 17, 2010 Marvell® 88EM8081 and 88EM8080 LED controllers can be used for range of solid-state lighting applications with output power ranges up to 150 W. In addition to analog circuitry, mixed-signal architecture includes DSP core and single-stage Power Factor Correction (PFC), allowing for addition of new features while lending to reliability and stability. It also enables adaptive feedback loop for optimized PFC level and minimal Total Harmonic Distortion (THD).

Pass & Seymour/Legrand    Syracuse, NY 13221
Feb 17, 2010 Combining passive infrared and ultrasonic technologies, Dual Technology Wall Switch Sensors are capable of detecting small and large movements in wide coverage area for timing on/off function. Three control options can set ON/OFF time delay: self-adaptive option, fixed time, and walk-through mode. Available in white, black, light almond, ivory, and gray, product fits into existing boxes and bi-level model is available to control 2 independent lighting loads from same box.

WEG Electric Corp.    Duluth, GA 30097
Feb 16, 2010 Featuring NEMA 4X enclosure, Model CFW08 VFD can be exposed to water, sprays, high humidity, and dusty environments without damage. Unit is rated for heavy-duty applications supporting 150% current overload capacity and can handle temperatures from 32-104°F with 90% humidity at altitudes up to 3,300 ft. Protective features include over current, motor overload, drive over temperature, short circuit, DC bus over and under voltage, and external fault.

Online Development Inc.    Knoxville, TN 37920
Feb 16, 2010 Without custom programming or middleware computer, eATM tManager enables data exchange between factory floor controllers and enterprise, business, and plant computer applications. Unit can be installed in panel or cabinet and connects to controllers and computer systems via 2 independent Ethernet ports. Module can connect controllers from Rockwell Automation, Siemens, and Schneider with databases such as MS SQL, DB2, and Oracle as well as Java Message Service systems.

Linear Technology Corp.    Milpitas, CA 95035
Feb 16, 2010 Simplifying design of low power isolated DC/DC converter, LT3574 eliminates need for opto-isolator, third winding or signal transformer for feedback since output voltage is sensed from primary-side flyback signal. Device operates over 3-40 V input voltage range and has 0.65 A NPN power switch. Features include boundary mode operation, onboard low dropout regulator for IC power, programmable soft start and undervoltage lockout, and operating temperature range of -40 to 125°C.

JVL Industri Elektronik    Birkeroed DK-3460  Denmark
Feb 15, 2010 Designed for MAC400 and MAC800 integrated servo motors, Model MAC00-B41 features 6 digital I/O, two 12-bit analog inputs, 2 multi-function RS422 channels, and dual supply for safe motor stop. Galvanically isolated RS232/RS485 interface can be used for setup and diagnosis or permanent connection in network. Primarily intended for dispenser applications, module features start and stop jitter of less than 50 µs and may be synchronized with external encoder.

ROHM Semiconductor USA LLC    San Diego, CA 92121
Feb 15, 2010 Measuring less than 1 in.², MK67Q5250 single-chip solution accelerates implementation of automated fingerprint identification and access control in various applications. It utilizes ML67Q5250 LSI MCU, which is factory programmed to control module's AES2510 fingerprint imaging sensor from Authentec; perform fingerprint processing and matching; store biometric control code, application code, and templates; as well as communicate with host processor.

Cattron-Theimeg, Inc.    Sharpsville, PA 16150 1198
Feb 12, 2010 Model LRC-M1 wireless control system for electric overhead travelling (EOT) cranes handles up to 4 motions with 2 ergonomic, multi-axis joystick controllers. Unit includes trolley/hoist selector, 2 auxiliary push buttons, and toggles, all mounted on impact-resistant Lexan EXL® housing. Controller also utilizes external TransKey(TM) RFID configuration for efficient operations, so facilities can minimize spares and transfer keys to other controllers.

Remy International, Inc.    Pendleton, IN 46064
Feb 12, 2010 Eliminating need for vehicle wiring harness, Delco Remy 44MT(TM) heavy-duty starter features Internal Magnetic Switch Solenoid, with input current capable of ECM control, as well as withstand engine temperatures up to 248°F. To improve soft start engagements, starter includes Clutch Over Planetary Gear Drive System which slowly rotates pinion until it is properly engaged to ring gear before cranking. Unit also has Over Crank Protection circuit breaker that provides thermal protection.

Vista-CCTV    Wokingham RG41 5TS  United Kingdom
Feb 11, 2010 Able to control all Vista DVRs, matrices, and Speed Domes, VKBD4 Control Keyboard can also control various third party devices via built-in multi-protocols. Up to 16 keyboards can be connected to RS485 network, and hierarchical priority supports up to 255 devices. For additional control flexibility, 2 different RS485 protocols can be run simultaneously. Navigation is facilitated via 3-axis joystick and 31-tactile push button control keys.

Jetter USA Inc.    Clearwater, FL 33764
Feb 11, 2010 JetControl 940MC controller is suitable for use in path control and interpolation applications, as well as with technological functions such as screw-capping, electronic gearing, and winding. It is programmed via high-level language JetSym STX, which is able to perform multitask operations. Available interfaces include Ethernet, CAN, serial, and USB, with standard Ethernet TCP/IP applied as communication network. Unit supports IT services such as HTTP, FTP, and email.

Exar Corp.    Fremont, CA 94538
Feb 11, 2010 Featuring input voltage range of 6.5-20 V and output of 0.9-5.0 V, PowerXR XRP7708 permits real-time power system adjustments during design in response to changing requirements. Field programmable power regulator IC contains 4 digital PWM controlled power supplies with 12-bit resolution as well as integrated LDO regulator, integrated gate drivers, and up to 6 GPIO pins. Digital PID control algorithm performs full-digital loop control at switching frequencies to 1.5 MHz.

Cogiscan, Inc.    Bromont, QC J2L 2N8  Canada
Feb 10, 2010 Cycle Stop Controller electrically integrates with cycle stop circuit of any machine type. When used in conjunction with any Cogiscan software module, application forces machine to stop processing when process validation error occurs. This eliminates risk of building defective product due to invalid machine setup or trying to perform operation out of sequence. Solution also integrates with any third-party software application with communication protocol using TCP/IP socket connection.

SIS-Tech    Houston, TX 77034
Feb 10, 2010 As standalone safety instrumented system, DIAMOND-SIS AIB backs up current process control trip logic and meets IEC 61511 requirements. Included IEC 61508 logic solver is functionally independent from process control system, supplements existing logic, meets all appropriate safety standards, and accepts any analog input. System comes in single-, dual-, and triplicated-channel configurations with online diagnostics, testing, and maintenance capabilities.

HaydonKerk Motion Solutions    Waterbury, CT 06705
Feb 10, 2010 Built to RoHS standards, IDEA(TM) electronic drive is fully programmable via on-screen buttons. Motor and drive parameters are automatically populated based on entered Haydon actuator part number, and default values can be adjusted as long as they remain within safe range. Users can also troubleshoot programs using line-by-line or multiple line program execution using debug feature. Additionally, inputs and outputs can also be simulated in software before connecting actual I/O hardware.

Linear Technology Corp.    Milpitas, CA 95035
Feb 10, 2010 Available in MSOP-16E and 4 x 3 mm DFN-16 packages, LT3029 operates from 1.8-20 V input and delivers up to 500 mA per channel of continuous output current with low dropout voltage of 300 mV at full load. It features 20 µVRMS noise across 10 Hz to 100 kHz bandwidth and provides independent inputs and shutdown control for each channel. Delivering adjustable output voltages from 1.215-19.5 V, product offers tracking/sequencing capability and is stable with 3.3 µF output capacitor.

Trimble Navigation Limited    Sunnyvale, CA 94085-3913
Feb 09, 2010 Using GCS900, contractors can port their machine control system components between dozers, graders, excavators, soil compactors, trimmers, paving, and milling machines to meet productivity demands across all types of development projects and all phases of construction life cycle. Automatic control of cutting implement and auto-guidance of machine to road alignment increases quality of graded surface. Cutting depth control can also reduce number of passes required of trimmer.

Adalet    Cleveland, OH 44135 3301
Feb 08, 2010 Using one frame size to control and protect motors up to 30 hp at 480 V or 25 hp at 600 V, Explosion Proof Combination Motor Starter provides universal enclosure and starter assembly for Size 0 through Size 3 applications. Exchanging trip modules does not require tools or re-wiring. Measuring 10 x 14 x 6 in., units are available in both AC and DC, full voltage non-reversing and full voltage reversing models up to 42 A continuous current. FVNR versions are mounted on standard 35 mm DIN rail.

Fortress Interlocks Ltd    Erlanger, KY 41018
Feb 08, 2010 Available with up to 5 safety key adaptors, ATEX-certified CPS4STOPXP releases keys which can be used to control mechanical door locks that provide access to machinery and process lines operating in potentially explosive environments. Switch and door locks are suitable for use in zone 1 and 2 environments, and electrical parts are ingress-protected to IP67. Manufactured from stainless steel and zinc alloys, station features dual-channel safety circuits with positive break switches.

Laird Technologies    Chesterfield, MO 63017
Feb 08, 2010 Functioning as single directional units, microcontroller-based Q Series adds heating or cooling temperature control to thermoelectric assemblies. Temperature set point ranges from -20 to 50°C and can be adjusted with internal or external potentiometer. Accommodating supply voltage of 12-58 Vdc, controllers power thermoelectric module and 2 DC fans with max available current of 16 A and 2 A. Temperature regulation modes include On/Off, PWM, and Proportional.