Receive industry and products news from the market categories that matter to you most.
Stay up to date on industry news and trends, product announcements and the latest innovations.
Construction Equipment and Supplies
Powered by Tier 4i 44.6 hp, water-cooled Kubota diesel engine, BOMAG BW138AD-5 provides working width of 54.3 in., max centrifugal force of 10,800 lb, and dual vibration frequencies of 3,480 or 2,820 vpm. Roller's bolt-on oscillating and articulating joint optimizes maneuverability by allowing rear drum to follow same path as front drum while turning. Equipped with 81.9 gal water tank, pressure... Read More
Equipped with 138 ft telescopic and articulated aerial platform that supplies up, over, and down range of motion with 80 ft horizontal reach and below grade capabilities to 23 ft, Spartan Telstar can navigate over parapets for roof rescues, clear power lines, and provide below grade rescues. System offers capacity of 1,000 lb, or 500 lb with water flow of 1,000 gpm. In addition to redundant... Read More
Molded Fiber Glass CP Provides Special Custom Forms to Be Used at the University of Albany's Newest BuildingApr 30, 2012
Independence, KS - Molded Fiber Glass Construction Products (MFG CP) was chosen to provide fiberglass concrete forms that created the fab level for the College of Nanoscale Science and Engineering (CNSE) of the University of Albany. The new building totals 280,000 square feet, and features a 50,000 square foot clean room, at the center of the building. The new facility, NanoFab Xtension will... Read More
Through our partnering arrangement with GSM Roofing and RoofConnect, GSM Industrial can supply and install your SafePro Roof hatches. This auto opening, fully safety railed, solar powered roof hatch is the latest in ease of use and OSHA compliance. You can see the benefits on this video. http://www.youtube.com/watch?v=Yrq1VdREBtw We can retrofit your existing Bilco type hatch, or install a new... Read More
Easy-to-Use Grade Control System Extends the Functionality Without the Need for Design Data PARIS - Trimble (NASDAQ: TRMB) today introduced an innovative new system configuration for the affordable and easy-to-use GCSFlex(TM) Grade Control System. The addition of GPS guidance extends the system's functionality and allows a contractor to work faster and with more freedom than other traditional... Read More
Utilizing crane's variable frequency drive control, Flex Pro Handheld Transmitter provides true stepless load control. Unit offers choice of 8 or 12 proportional button configurations, and adjustable speed control with 4 mode settings of 25, 50, 75, and 100% output. I-CHIP module enables universal transmitter to be programmed in field. Featuring rugged nylon housing, ergonomically designed... Read More
Powered by 213 hp, 6-cylinder DL08K water-cooled diesel engine, Model DX300LC features max digging depth of 24 ft, dump height of 23 ft 10 in., and max digging reach of 35 ft 2 in. Machine's 466 in.Â³ engine is optimized for use with cooled exhaust gas recirculation system, diesel oxidation catalyst, and diesel particulate filter. With variable-speed hydraulic fan regulating airflow through oil... Read More
PITTSBURGH, PA - Nicholson Construction was recently awarded the geotechnical contract for San Francisco's new Central Subway Project, with long-time Joint Venture partner Condon-Johnson. The new light-rail system will extend the current Muni's T Third Line by 1.7 miles, improving public transportation in San Francisco and providing direct connections to major retail, sporting and cultural... Read More
Don't miss the latest news!
Receive industry and products news from the market categories that matter to you most.
Formulated for use on latex and urethane elastomer mold materials, Release Coating 7958 includes additives that prevent mold staining and fouling when used in conjunction with powdered colorants. Coating also provides good slip and facilitates release from forms. Combined with minimal build up, product extends time forms remain in production before cleaning or replacement. Release Coating 7958 is... Read More
Available with 51, 61, and 71 in. cutting widths, Carbide Cutter G3 for skid steers is offered with various carbide-tipped and heat-treated steel teeth to match job requirements. Spiral tooth pattern on rotor ensures continuous tooth contact with material being cut, while combination of 2-stage cutting chamber with staggered counter teeth and shear bar results in small particle sizes and... Read More
Supplied as standard on BOMAG 1,570 lb BPR100/80D reversible plate compactor and offered as option on BPR70/70D, BPR55/65D, and BP45/55D models, ECONOMIZER provides real-time soil stiffness results. Acceleration sensor measures stiffness of target material across entire compacted area, and gathered data gathered is instantly displayed via series of 10 yellow LEDs. Indicator also provides warnings... Read More
JCB Adds Eight Small Platform Skid Steer and Compact Track Loader Models to New Generation Product LineMar 19, 2012
SAVANNAH, GA - JCB, the world's largest privately-owned construction equipment manufacturer, is building upon the success of its New Generation skid steer and compact track loader line with the addition of eight new small platform machines. The eight new machines-the 135, 155, 175, 190 and 205 skid steers and the 150T, 190T and 205T compact track loaders-complement JCB's nine large platform New... Read More
(WEST FARGO, N.D.) Bobcat has announced its 2012 lineup of light construction products, featuring a revamped line of air compressors, generators and pressure washers, as well as compaction equipment, including plate compactors and upright rammers. Powered by fuel-efficient, Honda engines, these durable models are designed to provide reliable performance for jobsite development and cleanup... Read More
Designed for performance, durability, safety, and control system integration, KEP3 bi-directional, over-center rocker pedal is used to drive vehicles equipped with hydrostatic transmissions and/or electronically controlled engines. There is 14Â° angular rotation fore and aft, and included sensor uses Hall-Effect technology and provides 2 types of redundant signals to fit various control... Read More
Extendable arm option for M-Series E55 compact excavator provides 30 in. of additional reach. Telescoping arm, which can be hydraulically extended and retracted as needed, is operated via rocker style thumb switch located on joystick and allows use of hydraulic clamp and Hydraulic X-Change(TM) attachment mounting system. When retracted, arm delivers similar tear-out force as standard arm.... Read More
To promote efficiency in demolition and rock-breaking applications, DXB260H features 2-speed control of breaker frequency for adjustment between short and long stroke settings. Product weighs 5,400 lb and delivers up to 600 blows/min. It is designed for use with excavators in 27-37 metric ton range. Rated in 8,000 lb-ft impact energy class, breaker requires hydraulic flow rate from 39.5-63.5 gpm.... Read More
Suited for concrete contractors, Models VP436 and VP446 are equipped with 36 in. and 46 in. rotors, respectively. Trowels provide height adjustable handles with either twist-action blade pitch control or lever-action positive pitch control. Driven by Honda engines, machines also feature cast iron spiders, pressure plates, and lift levers along with lifting bars. Read More
2012 IECC Implementation Increases Importance of Durable Roof Cover Boards Over Insulation ORLANDO, Fla. - Higher levels of energy efficiency will be required when states adopt the 2012 International Energy Conservation Code (IECC) starting this year. The new energy code, which calls for buildings designed to achieve a 30 percent increase in energy efficiencies over the 2006 IECC, requires a... Read More
SAGINAW, MICHIGAN - Duro-Last Roofing, Inc. is introducing a complete line of roof insulation products under the brand name Duro-Guard, at the International Roofing Expo, being held in Orlando, Florida, February 22-24. The product line includes a variety of private-labeled polyisocyanurate (ISO) and expanded polystyrene (EPS) insulation, as well as DensDeckÂ® roof boards. All new insulation... Read More
Powered by 20.2 hp Kubota diesel engine, Model BW90AD-5 offers working width of 35.4 in. and delivers 3,822 lb of centrifugal force at frequency of 4,200 vpm. ECOMODE automatically idles engine to conserve fuel during inactivity. Driver's platform is highlighted by multifunctional travel lever and Smart Drive steering wheel. Suited for small and medium asphalt compaction projects, roller is built... Read More