John Deere Harvester Works / Cylinder Division
Moline, IL 61265
Nov 16, 2005 Offering fine detail control, Worksite Pro(TM) RL66 and RL84 facilitate grading, leveling, and contouring for skid steer operators. Attachments enable operator to complete final grade on smooth and sloped surfaces. Without disturbing sub soil, box blade with roller level has no hydraulics to impede speed and can perform landscape and site preparatory work. Cutting edge shaves surface of soil, creating bed for seeding or leveling with box blade.

Michigan Pneumatic Tool, Inc.
Detroit, MI 48204-1184
Nov 16, 2005 Designed for use with diamond hole saws, 5 in. MP-1165W features spiral beveled gears and miniature brass ball valve with nylon seals to prevent leakage. Two-step safety lever prevents accidental start. Stainless steel spindle with wrench flats allows for removal of hole saw while dead handle offers stability and control when cutting. Grinder also features stainless steel feeder tube, 6 ft. rubber hose, and replaceable brass direction water tips.

Alimak Hek, Inc.
Houston, TX 77061
Nov 10, 2005 Fitted with overload protection devices and centrifugal braking systems, HEK MS ProMax is offered in freestanding and anchored configurations to reach heights up to 660 ft. Gearbox design enables travel speeds to 36 fpm, and payload capacity is 11,000 lb (twin mast) or 6,600 lb (single mast). Platforms are provided in lengths to 50 ft, and, when used in conjunction with Megadeck central deck section, have max length of 126 ft.

Angel-Guard Products, Inc.
Worcester, MA 01603
Nov 10, 2005 Angel-GUARD® Sandbagging Kits include EZ Bagger(TM) one-person sandbag filling tool and 50 sandbags. Weighing 7 lb, kit stores in less than 1 ft² space and can be used by people of all ages to prevent water damage to home interior and possessions. When filled to recommended level, each re-usable sandbag measures 17 in. tall by 4 in. thick and can be stacked to provide near water-tight protection for six 3 ft wide doors or windows.

Caterpillar, Inc.
Peoria, IL 61629
Nov 10, 2005 Designed with 5° forward-inclined left access ladder, H-Series provides simultaneous lift-and-tilt capabilities. Model 966H produces gross power of 283 hp and handles buckets from 4.5-5.5 yd³, while Model 972H produces 307 hp and uses 5.0-6.5 yd³ buckets. ACERT(TM) technology is US EPA Tier 3 compliant and provides advanced electronic control. Load Sensing Hydraulic Implement System automatically adjusts to operating conditions to provide only hydraulic flow required by implement.

Caterpillar, Inc.
Peoria, IL 61629
Nov 10, 2005 Powered by inline 6-cylinder Cat C7 engines with ACERT(TM) technology and mechanically actuated electronic fuel injection, 950H and 962H feature electro-hydraulic implement controls with simultaneous lift and tilt capabilities. Electronically controlled, hydraulically driven fan automatically changes speed to meet cooling requirements of machine. While 950H produces 216 hp gross power and handles 3.3-4.6 yd³ buckets, 962H produces 230 hp gross power and uses 3.8-5.0 yd³ buckets.

Liftomatic Material Handling, Inc.
Buffalo Grove, IL 60089
Nov 02, 2005 Able to fit any forklift without requiring any electrical or hydraulic connections, DCM-PW allows operator to pick drums from line or in rack without any side interference. Parrot-Beak® clamping mechanism safely lifts all rimmed steel, fiber, and plastic drums up to 2,000 lb. Attachment, designed for tight spaces in warehouses and plants, can also be used at shipping dock for loading containers or trucks and flatbed operations.

Caterpillar, Inc.
Peoria, IL 61629
Oct 20, 2005 Producing 3,462 lb of bucket digging force, 301.6C and 301.8C excavators employ 18.1 hp engine and feature variable displacement hydraulic pump that eliminates stalling. C-Series Mini Excavator cab has wide viewing area, suspension seat, console-mounted implement controls, and adjustable wrist supports to reduce operator fatigue. When equipped with optional long stick, max horizontal reach is 12 ft 6 in., and max digging depth is 7 ft 7 in.

Caterpillar, Inc.
Peoria, IL 61629
Oct 20, 2005 Producing 5,620 lb of bucket digging force, 302.5C features independent swing boom that allows machine to work next to wall or obstruction, and 200° bucket rotation enables material retention at height as well as flat trenching capability. When equipped with optional long stick, max horizontal reach is 15 ft 9 in., and max digging depth is 9 ft 7 in. Ergonomic cab includes suspension seat, console-mounted implement controls, and adjustable wrist supports.

Beta Max, Inc.
Palm Bay, FL 32905
Oct 20, 2005 Installable without requiring forklift or crane for set up, double-masted Max Climber(TM) 7700 travels up to 400 ft high at speeds to 35 fpm. Platform measures 90 x 6.5 ft, and each base unit uses four 2.2 kW motors and aluminum deck sections. When taken apart, mast sections are broken down into 5 ft, 110 lb sections to facilitate transport. Product is suited for tuckpointing, caulking, painting, restoration, and metal building installation projects.

Leica Geosystems Inc.
Norcross, GA 30092
Sep 13, 2005 Tunnel Measurement System combines TPS1200 Series reflectorless robotic total station with application programs for tunnel construction. TMS SETout can be used on mobile tripod for 1-man setout or as stationary, motorized, round-the-clock surveyor. TMS PROfile provides automatic profile measurement for geometric information, profile compliance, and calculations for quantity surveying. Used for tunnel profile design, TMS Office manages measurements, setout, and survey point data.

Alimak Hek, Inc.
Houston, TX 77061
Jul 20, 2005 Offering fully modular vertical transport solution, Scando 650 is available in single- or twin-car configurations, with 2-motor DOL, 2-motor FC, or 3-motor FC. Units offer payloads of 1,500-3,200 kg/car, speeds up to 65 m/min, and maximum lifting height of 400 m. Various types of doors and gates are available.

John Deere Harvester Works / Cylinder Division
Moline, IL 61265
Jul 13, 2005 Featuring hydrostatic drive train, Series 850J is powered by 185 hp PowerTechâ„¢ 6081 engine and comes with 2 blade configurations. Model 850J WT features outside-mount, 15 yd³ semi-U blade with trash rack, while Model 850J WLT offers inside-mount, 5.57 yd³ Power Angle Tilt blade. All have front and rear track guides and sprocket guard along with Dura-Traxâ„¢ undercarriage with deep-heat-treated, sealed, and lubricated track links and through-hardened, sealed, and lubricated rollers.

Dressta North America
Buffalo Grove, IL 60089
Jun 16, 2005 Featuring multi-unit cooling package with 2-speed hydraulic fan, TD-25M is powered by 320 net hp Cummins QSX-15 Tier II engine that produces 1,215 lb-ft of torque, with resulting drawbar pull at 2 mph of 44,000 lb. Ergonomic crawler dozer includes sloped hood for forward visibility and cab air recirculation system with optional MSHA filter. Single left-hand joystick controls all machine motion functions, and hydraulic system diagnostic ports aid in maintenance.

Garon Products, Inc.
Wall, NJ 07719 1924
Jun 14, 2005 Resistant to abrasion and scuffing, multi-purpose Grip-Coatâ„¢ provides protection for multi-use exterior surfaces. Colored coating provides surfaces with traction to prevent skidding in stop-and-go traffic areas and also seals, preserves, and adds anti-glare visibility. Ready for use in 24 hr, coating is suited for heliports, Med-Vac arrival and departure points, highway medial strips, traffic islands, tennis or basketball courts, and playgrounds.

Multiquip Inc.
Carson, CA 90746
Jun 06, 2005 Designed for mobile and crawler excavation, RAV Series works in confined spaces and is capable of generating centrifugal force from 11,700–24,750 lb depending on model. Attachments weigh from 882–2,205 lb and feature steel-wrapped hydraulic hoses and 360° rotation. Supplied with universal adapter plate and hydraulic connection terminal, series also incorporates movement limiting systems that protect structure and diagonally mounted rubber mounts.

Multiquip Inc.
Carson, CA 90746
May 13, 2005 Fueled by 3 hp Honda GX100 engine, Model MT-65HA delivers 2,900 lb of impact force on 645–695 bpm. Model MT-74FA generates 3,100 lb of centrifugal force with energy of 3.5 hp Robin EH12 engine. For more demanding applications, Model MT-84FA delivers 3,500 lb impact force on 660–700 bpm. It is driven by 3.5 hp Robin EH12 gasoline engine and travels up to 36 fpm. All models feature 2.1 quart fuel tank, duck bill fuel caps, diaphragm carburetors, and contoured handles.

Liftomatic Material Handling, Inc.
Buffalo Grove, IL 60089
May 13, 2005 Model LD-1 slides directly onto forks of any lift truck with no tools or connections required. Engaging top lift of container, Parrot-Beak® clamping mechanism lifts steel, fiber, and plastic drums weighing up to 850 lb. All-steel unit offers fully-automatic operation and is suited for plants and warehouses handling, stacking, and storing up to 50 drums per week.

G-Raff Systems
Cleveland, OH 44130-0905
May 10, 2005 Self-supporting Elevating Platforms feature level access platform that raises and lowers to exact height of vehicle, providing fall protection. Available in variety of models that can be customized, units feature machine screw actuation, push button operation, and self-adjusting stairway.

Degree Controls Inc.
Milford, NH 03055
May 06, 2005 Used together or independently, COLDFRONT products automate thermal management of data centers, central offices, and communication centers. Products include COLDFRONT NODE temperature data acquisition system and COLDFRONT TILE fan-assisted, perforated floor tile. Thermal management software, COLDFRONT THERMAL SERVER, communicates with NODEs to read temperature measured and commands tile fans to operate at different speeds as required.