Worksaver Inc.
Litchfield, IL 62056
Mar 30, 2006 Rail-style front loader attachment, Model PF-448, features 54 in. wide, all-welded frame. Solid forks with latch measure 1 3/8 x 4 x 48 in. and are rated at 4,000 lb for pair. Unit is supplied with standard pin-on brackets; optional interfacing quick-attach brackets for most loader models are available.

Komatsu America International Company
Vernon Hills, IL 60061
Mar 23, 2006 Model PC300LC-7 has flywheel horsepower of 246 hp and operating weight of 73,432-77,298 lb, while larger PC400LC-7 has flywheel horsepower of 345 hp and operating weight between 95,901-101,684 lb. Utilizing Komtrax technology, machine operating data is sent to secure website for analysis. With engines that comply with EPA Tier 3 and EU stage 3A emission regulations, excavators incorporate 2 boom mode settings, 4 working modes, and Power Max control.

Cat Lift Trucks
Houston, TX 77081
Mar 21, 2006 Series E3000-E6500 lift trucks feature MicroCommand(TM) AC control system, AC drive motor, and Operator Presence Detection System. Nine models are available with individual thermal protection systems, which guard against overheating, and separately controlled torque and speed.

Genie Industries, Inc.
Redmond, WA 98073 9730
Mar 07, 2006 Model S-60 HC telescopic boom offers 40 ft 8 in. of outreach and can hold up to 3 people and gear. Platform provides full range of motion up to 750 lb. Suitable for moving loads and people in and out of hard to reach areas, product accommodates movie and theatre business, and mechanical contractors, glazers, and brick layers.

Alemite LLC
Fort Mill, SC 29715
Feb 28, 2006 Designed to operate at low temperatures without icing, Series 8600 is hydraulically powered, eliminating need for compressor and making it suited for automatic lubrication systems installed on mobile equipment where space is limited. Self-venting unit includes pressure and flow regulators as well as 24 Vdc control solenoid, which allows hydraulic fluid to power pump.

Leica Geosystems Inc.
Norcross, GA 30092
Feb 07, 2006 MC200 Digger Excavator Guidance System includes dual slope rotation compensation and bucket tilt, weighing, and 3D with GPS positioning system. Unit is capable of compensating for any rotation of chassis and for bucket tilt when working on sloping surface. System uses graphical display to provide real-time depth, reach, and bucket slope information in relation to any reference. It incorporates LED light-bar, and sensors which facilitate bucket exchange and underwater digging.

Blastrac
Oklahoma City, OK 73114
Feb 02, 2006 Used on concrete prior to application of paint or coatings, portable Model 1-9DEZ runs on 120 V and can strip, clean, and profile in one step, without rinsing or drying time. With 9 in. blast pattern and manual travel speed, blaster can prepare up to 275 sq ft/hr. Applications include residential garage floors, pool decks, concrete preparation prior to installation of wood flooring, small industrial floor areas, and tight areas around equipment and obstructions.

Cognitive Technologies
Atlanta, GA 30305
Feb 02, 2006 Transition Management Toolkit guides project leaders through process for managing change and helps avoid problems while taking advantage of best practices. Along with 50+ detailed planning templates and readiness assessments, kit includes guidelines for writing full transition management plan and implementing it. Kit is based on model process for equipping transition team members with information, supporting organization in early implementation, and monitoring ongoing outcomes.

Sonoco
Hartsville, SC 29550
Feb 02, 2006 Designed to minimize construction delays attributable to inclement and wet weather, Sonotube(TM) incorporates water-resistant paper that lets contractors set concrete forms in wet weather and pour concrete the next day. RainGuard(TM) technology minimizes blowouts and can be incorporated into all existing types and sizes of Sonotube brand forms, including Round, Square, and Finish Free(TM).

Multiquip Inc.
Carson, CA 90746
Feb 01, 2006 With centrifugal force of 2,925 lb, MVC-80 Series is comprised of 4 models suited for compacting soils and asphalt. Each model employs anti-vibration handle system that helps minimize operator fatigue. At maximum speed, series compacts up to 72 ft of material per minute. Forward plate compactors are fitted with 17 x 22 in. steel base plate, offer 5.7 hp Honda or 5.5 hp Robin gasoline engines, and have exciter speeds of 5,580 rpm.

Alimak Hek, Inc.
Houston, TX 77061
Jan 30, 2006 Suitable for vertical access applications in facades, towers, and structures where anchoring is not an option, HEK MSHF can free stand 66 ft outside, or 99 ft inside mobile chassis that can be moved with mast in position. Product can also be used for heights up to 660 ft in single or twin mast configuration with anchors at 50 ft intervals. Payload capacity is up to 8,800 lb, and masts are hot-dipped galvanized for increased durability.

Komatsu America International Company
Vernon Hills, IL 60061
Jan 19, 2006 Powered by low-emission Komatsu SAA6D107E-1 engine with multi-staged fuel injection system, PC200LC-8 and PC220LC-8 offer respective flywheel horsepower ratings of 168 and 148 hp and operating weights of 54,309-54,926 lb and 45,480-46,690 lb. Both are equipped with Komtrax wireless technology and feature multifunctional 7 in. monitor. Other features include automatic air conditioner, Equipment Management Monitoring System, and pipe-structured cab framework.

Caterpillar, Inc.
Peoria, IL 61629
Dec 26, 2005 Sized for use with all Cat® skid steer and multi-terrain loaders as well as 302.5, 303.5, and 303 CR mini hydraulic excavators, Model H55Ds features recommended carrier weight of 5,500-9,900 lb. It can be equipped with chisel, moil, spade, or compacting plate. One-piece body eliminates tie rods and nuts. Enclosed housing protects power cell, while recoil isolation protects carrier from damaging forces, and high- and low-pressure accumulator assists power stroke.

Air Technical Industries
Mentor, OH 44060
Dec 22, 2005 Available in capacities from 1,000-20,000 lb, radio-controlled Reversible Boom Crane can make sharp 90° or 360° turn within its length for tight turning radius, and can reach over, into, above, beyond, or below ground. Travel speed is continuously variable and ranges from 1 fpm to 4 mph. Joystick-type radio control is supported by shoulder harness, giving operator free hands. Crane is suited for handling dangerous, toxic, flammable, or explosive material.

John Deere Harvester Works / Cylinder Division
Moline, IL 61265
Dec 20, 2005 With all vulnerable machine components guarded to protect against trash infiltration and impact damage, models 544J and 624J handle up to 5 and 6 yd³ waste buckets, respectively. Both withstand airborne debris, are designed to promote operator visibility, and feature Quad-Cool(TM) cooling system. Additional features include hydraulic belly pans, front and rear hydraulic differential option, and electronically controlled, 160 or 180 hp PowerTech 6068H engine.

Caterpillar, Inc.
Peoria, IL 61629
Dec 01, 2005 Featuring Cat® C18 engine for tractor and Cat® C15 engine for scraper, Model 657G provides max travel speed of 36 mph, max cut depth of 16.7 in., and max spread depth of 26.8 in. Both engines feature Mechanically-actuated Electronically Controlled Unit Injection and have dual horsepower capabilities. ACERT(TM) technology minimizes emissions during combustion process, while cooling system minimizes clogging, and G-Series cab and controls provide operator comfort.

John Deere Harvester Works / Cylinder Division
Moline, IL 61265
Nov 16, 2005 Offering fine detail control, Worksite Pro(TM) RL66 and RL84 facilitate grading, leveling, and contouring for skid steer operators. Attachments enable operator to complete final grade on smooth and sloped surfaces. Without disturbing sub soil, box blade with roller level has no hydraulics to impede speed and can perform landscape and site preparatory work. Cutting edge shaves surface of soil, creating bed for seeding or leveling with box blade.

Michigan Pneumatic Tool, Inc.
Detroit, MI 48204-1184
Nov 16, 2005 Designed for use with diamond hole saws, 5 in. MP-1165W features spiral beveled gears and miniature brass ball valve with nylon seals to prevent leakage. Two-step safety lever prevents accidental start. Stainless steel spindle with wrench flats allows for removal of hole saw while dead handle offers stability and control when cutting. Grinder also features stainless steel feeder tube, 6 ft. rubber hose, and replaceable brass direction water tips.

Alimak Hek, Inc.
Houston, TX 77061
Nov 10, 2005 Fitted with overload protection devices and centrifugal braking systems, HEK MS ProMax is offered in freestanding and anchored configurations to reach heights up to 660 ft. Gearbox design enables travel speeds to 36 fpm, and payload capacity is 11,000 lb (twin mast) or 6,600 lb (single mast). Platforms are provided in lengths to 50 ft, and, when used in conjunction with Megadeck central deck section, have max length of 126 ft.

Angel-Guard Products, Inc.
Worcester, MA 01603
Nov 10, 2005 Angel-GUARD® Sandbagging Kits include EZ Bagger(TM) one-person sandbag filling tool and 50 sandbags. Weighing 7 lb, kit stores in less than 1 ft² space and can be used by people of all ages to prevent water damage to home interior and possessions. When filled to recommended level, each re-usable sandbag measures 17 in. tall by 4 in. thick and can be stacked to provide near water-tight protection for six 3 ft wide doors or windows.