Anderson Products
Worcester, MA 01610
Dec 10, 2003 Wheel, cup, end, tube, and strip brushes are filled with high-tensile, oil-tempered steel; stainless steel; brass; and other non-ferrous wires, as well as synthetic and natural fibers. Manufactured in knot and crimped styles, brushes are offered in standard sizes, shapes, and wire diameters; custom-order brushes are also available. Applications include cleaning, deburring, surface finishing, roughening, and edge blending.

3M Industrial Tape & Specialties Div.
St. Paul, MN 55144 1000
Oct 20, 2003 Scotch-Briteâ„¢ 8 in. Radial Bristle Brush features mineral-filled plastic bristles, 1 in. width, and high concentration of Cubitronâ„¢ Abrasive Grain. Used on backstands, bench motors, and straight shaft tools, brush is available in 6 different grades from 36-400 that leave course satin to pre-polish finish. Brush can be used without abrasive chemicals, compounds, rouges, or pastes, eliminating exposure to hazardous vapors and waste disposal issues.

Weiler Corporation
Cresco, PA 18326 0149
Aug 18, 2003 Stem-mounted brushes are available in heat-treated steel or Type 302 stainless steel for both crimped and knot wire products. Styles include wheel, cup, and end brush configurations made with ¼ in. stems for mounting in tool collets. Dish-shaped, concave brushes are offered for cleaning and deburring off-hand or on drill presses. They are available in steel and stainless steel wire ranging from 1½â€“4 in. in diameter.

Flo-Pac Corp.
Minneapolis, MN 55401 1017
Mar 07, 2003 Swivel Scrub® head allows movement around fixtures, equipment, corners, and baseboards. Black, industrial strength, longwearing, polyester fill is water resistant and also resists high temperatures, acids, alkalis, and most cleaning solutions. Uneven polyester trim gets into grout lines and uneven surfaces. Available in eight color-coded options, unit offers lock-down collar that securely holds 15/16 in. threaded handle.

3M Co./Corp. Mktg. & Public Affai.
St. Paul, MN 55144 1000
Dec 11, 2002 Abrasive-filled brushes clean and finish hard-to-reach areas around protrusions and bosses or detail grooves and patterns. Flexible bristles apply continuous, fresh supply of sharp mineral to workpiece, providing uniform finish, while being gentle to base material and surrounding details. Available in color-coded grades, bristles conform to problem sanding areas without loose-flying wires. Additional sizes include 2 and 3 in. diameters.

Abtex Corp.
Dresden, NY 14441-0188
Nov 18, 2002 Bradex® brushes have nylon-only bristles for applications requiring less aggressive characteristics. Nylon filaments are molded into composite backing, which can be rigid or flexible as needed for application. Trim length, fill density, and filament sizes are controllable variables. Brushes are produced in black or clear, but may be custom ordered in range of colors.

Anderson Products
Worcester, MA 01610
Aug 12, 2002 Wide Face Crimped Wire Wheel brushes are characterized by wide and dense brushing faces. Construction permits brushes to be mounted individually or in groups, to cover more surface area in one pass. Low flexibility provides fast cutting action and long life, while oil tempered crimped wire provides uniform brushing action. Applications include deburring, edge blending, flash removal (rubber and plastic parts), and cleaning and removal of rust.

Thomas C. Wilson, Inc.
Long Island City, NY 11101
Jul 18, 2002 As Expanding Brush and Expanding Scraper spin, centrifugal force raises floating brushes or floating scraper blades so they conform to tube's ID, even if ID changes along length of tube. As brushes and scrapers wear, they raise more to conform to tube's ID. Applications include cleaning boilers, heat exchangers, condensers, chillers, steam generators, and pressure vessels. Brush cleans tubes up to 2 1/2 in. OD, while scraper handles tubes up to 6 1/2 in. OD.

Malish Corp., The
Willoughby, OH 44094
Jul 08, 2002 TuftStripâ„¢ Tufted Brush Skirt consists of brush filament and plastic profile extruded from rigid or flexible resins. It can be produced in heights up to 16 in. and lengths up to 160 in. Skirt can be used to prevent excessive splashing of cleaning fluids on floor cleaning machines, to filter out particulates in water filtration systems, as draft control barrier on warehouse docks and ramps, and to keep dirt and other contaminants from clogging gears.

Anderson Products
Worcester, MA 01610
Jun 21, 2002 Tube or Spout Brushes are suitable for manual cleaning and brushing of internal diameters in wet or dry applications. Loop handle provides comfort and utility when reaching deep areas. Applications include deburring and cleaning drilled holes and internal threads; cleaning and finishing internal diameters of pipes and tubes; deburring and cleaning internal keyways and grooves; carbon removal; and crosshole deburring.

Anderson Products
Worcester, MA 01610
May 16, 2002 First Choice Professional Paint Brushes include flagged and prepared Black China bristles. Hog bristle has natural taper and flagged or split end at small end of taper. Flagging enables brush to pick up, hold, and release paint uniformly. Handles are sanded, treated, and finished to a smooth surface. Brushes have nickel ferrules that will not rust.

Fisnar Inc.
Wayne, NJ 07470
May 16, 2002 Dispensing Brush Tips, in soft and hard styles, are suitable for applying consistent brush deposits of most materials, particularly grease and lubricants. Tapered bristles ensure accurate applications and long life. Both styles are connected to syringe or dispensing valve by a quick-release Luer-Lock fastening. They can be used with any of company's automatic or manual dispense systems.

Anderson Products
Worcester, MA 01610
May 14, 2002 Available in knotted and crimped wire, Mini-Grinder Cup Brushes are offered in carbon and stainless wire and are adaptable to both light- and heavy-duty brushing applications. Crimped wire Mini-Grinder suits applications where uniformed cleaning is required, as well as for flat brushing and edge cleaning. Knotted wire Mini-Grinder suits weld cleaning, scale removal, and deburring. Mini-Grinder Brush Adapters (standard to metric) are also available.

Eraser Co., Inc., The
Syracuse, NY 13221
May 08, 2002 Fiberglass brushes roughen surfaces to enhance adhesion of solder, paint, and epoxy. Other uses include cleaning electrical contacts, removing rust, removing epoxy and paint, and cleaning injection molds and foil stamping dies. Brushes are suitable for use in printed circuit board industry for PC board rework, including flux removal, edge connector cleaning, trace cleaning for soldering, and tarnish removal.

Weiler Corporation
Cresco, PA 18326 0149
Nov 15, 2001 Stem-mounted concave brushes are suitable for cleaning and deburring off-hand or on drill press. Dished shape is useful when working in corner areas. Concave brushes are available in both steel and SS wire from 1-1/2 to 4 in. dia. Applications include cleaning and finishing recessed areas or internal diameters; die, mold and tool cleaning and polishing; deburring; weld and carbon cleaning; spot facing; and cleaning rust, paint, scale or slag.

Anderson Products
Worcester, MA 01610
Nov 05, 2001 Scratch Brushes include Hand Scratch Brushes for removing paint, rust, scale, solder chips and dirt; Block Type Brushes for rough cleaning applications on flat surfaces; and Butcher Block Brushes for heavy-duty cleaning and descaling. Brushes are available in various sizes for clean-up jobs and maintenance use.