Larson Electronics, LLC    Kemp, TX 75143
May 02, 2013 Equipped with two 400 W metal halide lamps with die cast aluminum housings, aluminum reflectors, and heat/impact-resistant tempered flat door glass, Model WAL-2X400MCE illuminates 50,000 ft² of workspace. Lamps are attached to removable mounting arm with U-brackets that allow each lamp to be adjusted independently. Adjustable center mast can elevate lamps to provide maximum coverage. Operating with 110–277 universal current, light includes 50 ft of SOOW cord fitted with 5–15 straight blade plug.

Larson Electronics, LLC    Kemp, TX 75143
Apr 29, 2013 Equipped with 3,250 V generator, Model WAL-ML-3XM-3G utilizes three 1,000 W metal halide lamps to produce 330,000 lm in large flood pattern. Adjustable lamp brackets allow operator to adjust each lamp independently. When elevated to full 12 ft height, tower can illuminate 3 acres of work or event area. Tower and base assembly is constructed of powder-coated steel with rubber tires for mobility. Operating for 9+ hr on one tank of fuel, generator includes 120 Vac outlets to run additional devices.

Larson Electronics, LLC    Kemp, TX 75143
Apr 18, 2013 Along with three 150 W LED light heads that collectively produce 44,370 lm, PLM-18-3X150W-LED incorporates compressor for pneumatic extension from 8–18 ft high and lowers via release valve. LEDs are rated for 50,000+ hr, and lights feature extruded aluminum housings, polycarbonate lenses, CREE LEDs, and IP68 waterproof rating to 3 m of submersion. Designed to illuminate worksites and outdoor events, tower operates with 120–277 Vac and mounts using 12 x 12 x ½ in. predrilled mounting plate.

Larson Electronics, LLC    Kemp, TX 75143
Apr 16, 2013 Featuring 3-section mast powered by compressed air, Model PLM-18-4X1000W utilizes four 1,000 W metal halide lamps to illuminate over 3 acres. Each lamp produces 110,000 lm of intense white light for combined total of 440,000 lm. Mast has minimum height of 8 ft and can be extended up to 18 ft. Constructed of heavy-duty aluminum with heat treated lenses, lamp fixtures feature 19 in. reflectors. Entire lamp assembly is attached to tower via 24 in. long mounting plate that can be detached.

Patlite (USA) Corporation    Torrance, CA 90501
Apr 10, 2013 Suitable for use in Class I, Zone 1, Exd IIC T6 explosive environments, 5-light EDWM-style model is available for 24 Vac/Vdc or 90–250 Vac operation, while 3-light EDLM-style model is available for 24 Vac/Vdc or 120 Vac operation. FM-certified towers feature IP66 rating for wet or dirty locations. Providing at-a-glance visual status indication, LED modules can be wired through terminal block for steady or flashing mode. Two angle brackets facilitate top- and wall-mount orientations.

Larson Electronics, LLC    Kemp, TX 75143
Apr 02, 2013 Employing 3 metal halide lamps, PLM-18-3X1000W produces 330,000 lm of illumination in wide flood pattern capable of covering 3+ acre areas. Each independently adjustable lamp has 16 in. aluminum housing and reflector assembly with heat-treated glass lens, and tower mast consists of 3-piece, pneumatic unit that can be raised from base 8 ft height to 18 ft max using compressed air. Providing 3,000 W of lighting, tower withstands industrial and commercial work site conditions.

Larson Electronics, LLC    Kemp, TX 75143
Mar 26, 2013 Powered by included 1/3 hp air compressor, PLM-18 can safely elevate 150 lb of lighting equipment without hand cranks or winches. All wiring is mounted internally within 6-wire harness, with 12 in. of wiring extending from both ends of tower for connection of power sources and devices. Release valve at bottom of tower lets operators collapse unit for precise height control or transport. Comprised of 3 sections, tower is constructed of heat treated aluminum tubing.

Larson Electronics, LLC    Kemp, TX 75143
Mar 20, 2013 Equipped with pair of 1,000 W metal halide lamps, Model WAL-ML-2XM-3G provides total of 220,000 lumens in wide flood pattern for illumination of large areas. Single 6000 VA generator powers lamps for up to 6 hours on single tank of fuel and is mounted to base platform. Generator includes standard 120 and 240 V outlets that allow users to connect tools and other electrical devices. Constructed of powder coated steel, telescoping tower can be elevated to 7 ft in height using included hand crank.

Larson Electronics, LLC    Kemp, TX 75143
Mar 19, 2013 With Model WAL-ML-4X150LED-3G, users can illuminate large scale worksites or events without external power sources. System comprises pneumatic tower that can be adjusted from 7–25 ft in height, 3,000 VA generator that will run for 8 hr on one tank of fuel, and 4 LED light heads that produce total of 59,160 lm of light output, all on wheeled base. Housed in thick aluminum, LED lights feature IP68 rated waterproof construction, unbreakable polycarbonate lenses, and CREE XLamp XPG® LEDs.

Larson Electronics, LLC    Kemp, TX 75143
Mar 19, 2013 Powered by single generator producing 3,250 VA, Model WAL-ML-3XM-3G is equipped with three 1,000 W metal halide lamps and adjustable light tower boom that can be elevated up to 12 ft in height using included hand winch, effectively illuminating 3 acres of work or event area. Lamp brackets allow each lamp to be adjusted independently, while heavy-duty rubber tires on base enable mobility. Running for 9+ hours on one tank of fuel, generator includes 120 Vac outlets for additional devices.

Larson Electronics, LLC    Kemp, TX 75143
Mar 15, 2013 Approved for use in Class 1 Division 2 hazardous locations, portable HAL-QP-1x150LED-100 features 150 W LED lamp, encased within die cast aluminum, that produces 14,790 lm in flood pattern for illumination of up to 18,000 ft² areas. Tower is constructed of powder-coated, 1/8 in. thick steel and can be adjusted from 7–10 ft in height. IP65 lamp assembly can be adjusted through vertical and horizontal positions or removed, and 4-leg wheeled base provides for stability and mobility.

Larson Electronics, LLC    Kemp, TX 75143
Mar 15, 2013 Designed for events and worksites, WAL-TP-2XGLM-H-1227 features 2 magnetically mounted, 35 W HID spotlights that offer combined output of 6,000 lm, are adjustable through 370° of rotation and 140° of tilt, and can be remote controlled from up to 100 ft away. Collapsible tripod, constructed from aluminum with stainless steel hardware, can be extended from 3–8 ft in height. Able to operate from 120–277 Vac current or 12 Vdc source, lights project beams up to 5,000 ft long.

Patlite (USA) Corporation    Torrance, CA 90501
Mar 14, 2013 With smooth design that minimizes water and dust adhesion, LS7 Series has no exposed screws, shafts, or other metals, making towers suitable for wide range of environments, including food processing. Stackable design with optional M12 quick disconnect facilitates installation and eliminates need for separate relay box, while shock resistant polycarbonate lens ensures reliable operation. Optional 2,000–3,000 Hz buzzer emits sound frequency that can cut through noise from machinery.

Larson Electronics, LLC    Kemp, TX 75143
Mar 07, 2013 Featuring right angle extension arm, wheeled base with 4 lockable steel wheels, and pair of 1,000 W metal halide lamps, Model WALBL-2X1000WMH produces 220,000 lm of light output in wide flood pattern for servicing and maintenance of boilers and tanks. Each lamp features spun aluminum reflector assembly and heavy duty ceramic socket base with tempered glass lens. Lamps are mounted to boom with single mounting arm and trunnion style brackets that allow vertical adjustment.

J-Works,Inc    Ganada Hills, CA 91344
Mar 01, 2013 Rated 8 A @ 240 Vac, JSB2871 series provides DPST relay with output that feeds AC power outlet. Wire connection to relay module is made with on-board screw type terminals, and any standard AC line cord plugged into outlet can be controlled by USB commands. Replaceable fuse protects relay and AC line, and options for relay board include AC detection of either input or output power. SFF module replaces internal PC-based plug-in cards in test/control/monitoring/measurement applications.

Larson Electronics, LLC    Kemp, TX 75143
Feb 20, 2013 Featuring collapsible tripod which can be extended from 3–8 ft in height, Model WAL-TP-2XGLM-H-1227 uses two 35 W HID Golight units providing 3,000 lm each for total of 6,000 lm. Each lamp mounts to tripod with single magnetic base. With remote control range up to 100 ft, dual lamp configuration can be adjusted through 370° of rotation and 140° of tilt for precise beam placement. Weather resistant housings are constructed of ASA Luran thermoplastic that is heat-, impact-, and UV-resistant.

Larson Electronics, LLC    Kemp, TX 75143
Feb 19, 2013 Providing IR illumination, WAL-LED3W-4S-IR is designed for use with night vision equipment and devices. Product features collapsible tower, 4 IR LED light heads, and rechargeable battery. Latter will run unit for up to 55 hr on one charge and may be recharged from 120 Vac outlet or vehicles/equipment with 12 V electrical systems. Set up in less than 30 sec, 48 lb unit will withstand 65 mph winds, even with tower extended to full 8 ft height, in fully deployed configuration.

Larson Electronics, LLC    Kemp, TX 75143
Feb 04, 2013 Able to illuminate up to 1 acre of area, Model WAL-ML-4X150LED-3G LED features extendable pneumatic mast with wheeled based, onboard 3,000 Va generator that will run for 8 hr on single tank of fuel, and 4 LED light heads that produce combined total of 59,160 lm. Tower assembly, constructed with aluminum mast and powder coated steel frame, can be adjusted from 7–25 ft in height. Lights have thick aluminum housings, IP68-rated waterproof construction, and unbreakable polycarbonate lenses.

Larson Electronics, LLC    Kemp, TX 75143
Feb 01, 2013 Constructed of aluminum, WALTP-CU12-4X150W-LED Quadpod Mini Light Tower features 4 LED light bars, each producing 14,790 lm for combined total of 59,610 lm light output. Lamps have heavy gauge extruded aluminum housings, sealed polycarbonate lenses, and IP68 waterproof rating. Built-in hand crank allows operator to extend tower from 7–14 ft, while braking system prevents overly rapid or accidental collapse. Equipped with 4 aluminum legs, tower offers stability in windy conditions.

Larson Electronics, LLC    Kemp, TX 75143
Jan 18, 2013 Capable of standalone operation, WAL-ML-2XM-3G Mini Light Tower can illuminate 2 acres via one pair of independently adjustable, 1,000 W metal halide lamps that produce 220,000 lm total in wide flood pattern. Telescoping mast can raise lamps up to 7 ft high using included hand crank, and heavy-duty base with rubber tires facilitates portability. Mounted to base platform, 3,000 VA generator powers metal halide lamps for up to 6 hr on one tank of fuel and includes 120 and 240 V outlets.