LumaSense Technologies, Inc.    Santa Clara, CA 95054
Apr 05, 2011 IMPAC IS 320 and IGA 320 multi-purpose IR temperature sensors have compact, stainless steel design, and offer non-contact measurements in applications such as metal, ceramic, or graphite processing plants. Built-in LED pilot lights let users align and focus instrument to measurement target. They are EMI safe, include optics to measure areas or objects as small as 1.2 mm, and offer 2 msec response rate. Digital and analog outputs and exchangeable cable connections are included.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 30, 2011 Intended for PC-based, non-contact temperature monitoring, IR-USB series features IR sensor/signal conditioner installation with direct USB connection. Included software converts PC into temperature meter, chart recorder, or data logger. Taking measurements from 0 to +1,000°F, sensor offers adjustable emissivity from 0.10-1.0. Typical applications include jobs where object to be measured is moving, is surrounded by EM field, or is contained in vacuum or other controlled atmosphere.

CCI Thermal Technologies Inc.    Edmonton, AB T6B3E1  Canada
Mar 23, 2011 Equipped with limit controls and heavy-duty core, Ruffneck(TM) FE2 is designed for rugged, industrial applications in harsh environments. Standard features include fan only switch, built-in thermostat, pilot light for HEAT ON indication, and built-in disconnect switch. Available in models that range from 2.5-23.1 kW and 220-440 V, heater also incorporates VacuCore® liquid-to-air heat exchanger and features junction box sized to facilitate installation.

Ametek, Inc.    Wallingford, CT 06492
Mar 21, 2011 Equipped with Universal Drive System, Windjammer® 5.7 in. Brushless DC Blowers operate over wide range of voltage inputs from 100-240 Vac. Variable speed units feature IntelliGen(TM) Controller Design utilizing factory-programmed digital signal processor. Offering virtually maintenance-free operation, blowers can develop output pressures up to 160 in. H₂O and flows up to 270 cfm. Users can select low-voltage, high-voltage, thru-flow, or bypass types as required.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Mar 18, 2011 Equipped with 27 hp Kubota diesel engine, EnPak® Air Power 40 eliminates need for hydraulically driven standalone or under-hood compressors, and integrates seamlessly into truck's electrical and fuel systems, allowing field service personnel to run air and power tools off one unit with truck turned off. System includes Air Pak(TM) 40 variable-speed rotary screw air compressor, rated 40 cfm at 100 psi with 175 psi max pressure. It also delivers 6,000 W of generator power for welders and power tools.

Thermacore Inc.    Lancaster, PA 17601
Mar 16, 2011 Designed to meet VME64x/VPX standards, Cold Plates are available in 3U, 6U, and 9U formats. Baseline aluminum cold plates are produced from aluminum alloys such as 6061 and 6063 with thermal conductivity values of 166 and 201 W/m. k-Core® models, encapsulating Annealed Pyrolytic Graphite with same aluminum alloys as basic models, deliver up to 6x conductance. Embedded Heat Pipe options are constructed from solid aluminum with integrated heat pipes to remove hot spots.

Fanimation    Zionsville, IN 46077
Mar 14, 2011 At high speed, Landan(TM) LED Ceiling Fan delivers 5,621 cfm airflow with efficiency of 194 cfm/W. Unit's LED luminaire features CREE LEDs on top to create uplight glow and LED cluster to provide downlighting. Uplight includes 8 LEDs that consume 10 W to produce 627 lumens, while downlight uses 12 LEDs that consume 15 W to deliver 855 lumens. Offering 60 in. blade sweep, Energy Star-rated fan uses 29 W at high speed without lighting and 54 W when used with uplight and downlight.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Mar 14, 2011 Available in 12-60 in. dia, FVIB aerodynamic, belt-driven fans are suited for contaminated air stream applications. Housing is constructed of UV-inhibited Hetron 99 P polyester resin, with Class I flame spread of 25 or less, while shaft and hardware are of 316 stainless steel. Statically and dynamically balanced, fan features FRP airfoil axial impeller, flanged inlet and outlet, EPDM double lip shaft seal, and TEFC industrial-duty motors.

Atmel Corporation    San Jose, CA 95131
Mar 09, 2011 With integrated non-volatile registers and 2, 4, or 8 Kb of Serial EEPROM memory, AT30TS750 Series allows for user-configured settings to be retained across power cycles. Units feature ±0.5°C accuracy, user-selectable 9-12 bit resolution, and temperature range of -40 to +125°C. Sensors can directly control other circuits in system to offload requirements in MCU. Equipped with I2C/SMBus compatible serial interface, ICs are suited for consumer, industrial, computer, and medical applications.

Climatecraft    Oklahoma City, OK 73101
Mar 08, 2011 Available in 34.5 in. wide configurations to pass through 3 ft door openings, FanMatrix(TM) Towers are designed for medical, institutional, and commercial applications ranging from 3,000-200,000 cfm, in which original AHU is functional but requires new fans due to failure, age, or poor performance. Each fan is spring isolated for optimal seismic performance and to eliminate vibration. To withstand harsh environments, fan cabinets are finished with industrial coating system.

Selco Products Co.    Reno, NV 89521-5908
Mar 02, 2011 Measuring 75 x 33 x 70 mm, 3699A Electronic Temperature Controller integrates 4-digit LED segment display, 4 pushbuttons, and timer control for energy savings. Power input options of 115/230 Vac, 50/60 Hz or 12-24 Vac/Vdc are available as well as output choices of SPST relay rated at 10 or 3 A, or 12-24 Vdc for external SSR and buzzer alarm. Designed for cooling and heating control for temperatures from -40 to +2,100°F, unit also offers 4 operating modes and programmable settings.

Datapaq Inc.    Wilmington, MA 01887
Mar 02, 2011 To help optimize manufacture of electronic assemblies, Model PA2200A uses 2 sensors to monitor performance of pre-heat stage of process and 3 sensors to monitor dip soldering stage. Dip soldering thermocouples enable monitoring of solder temperature, as well as dwell time in solder, and can be set at different heights to allow for measurement of contact time at various depths. System also generates detailed reports on selective soldering operation.

Greenheck    Schofield, WI 54476 0410
Feb 24, 2011 Models ERCH and VER incorporate digital scroll compressors to improve temperature and humidity control while conserving energy. Featuring integral controller with time-averaging sequence, scrolls are engaged and disengaged at rate which varies in order to match required cooling capacity. Use of digital scrolls for capacity control ensures output air temperatures as precise as 1°F. Digital scrolls also offer cooling capacity turndown from 10%-100%, promoting extended cycle times.

Mokon    Buffalo, NY 14207
Feb 24, 2011 With ambient temperature range of -25 to 105°F, Iceman Outdoor Air-Cooled Chillers utilize scroll compressor for quiet operation and are designed for exterior installation, freeing up indoor floor space. Units feature nonferrous components, advanced microprocessor control technology with digital readout, NEMA 4 or 4X remote or local enclosures, and painted steel or stainless steel cabinetry. Chillers utilize Green friendly refrigerant and meet NFPA 79 electrical safety standards.

DuctSox    Dubuque, IA 52002
Feb 22, 2011 SkeleCore(TM) in-duct cylindrical tensioning device maintains inflated appearance, even during idle air handler periods, and eliminates popping sound associated with equipment start-up. Product consists of ¾ in. dia aluminum tube supporting 3/16 in. dia powder-coated steel, and 360° connecting rings which add tension to inner fabric duct walls. Tubes are 6 ft long and snap into support rings and couplers, and product is available in 15 diameters ranging from 8-36 in.

TRIATEK    Norcross, GA 30093
Feb 22, 2011 Featuring touchscreen technology, Model HMS-1650L displays both numerical data as well as general fume hood status via background color. Unit indicates if fume hood is in safe, warning, or alarm status depending on if background is green, yellow, or red, respectively. In addition, controller can display face velocity, sash position, temperature, date, and time on single screen. Suited for LON networks, Model HMS-1650L can be deployed as either controller or monitor.

Ekahau, West Coast    Saratoga, CA 95070
Feb 22, 2011 Respectively, tags TS1 and TS2 feature 1 and 2 extended cable probes that can be installed inside environment where temperature is being measured and have -328 to +302°F range. HS1 tag measures RH up to 100% and temperature ranges from -40 to +185°F. While battery power lasts up to 3 years at 15 min reporting interval, tags can sample temperature/humidity as often as 15 sec or as required. On-board heuristics enable immediate reporting of anomalies that occur between reporting intervals.

TRIATEK    Norcross, GA 30093
Feb 22, 2011 Supplied in .625 in. deep controller chassis, stainless steel FMS-1650-T consists of full color touchscreen unit that can be installed on any wall using included mounting bracket. Flush-mounted unit simultaneously displays pressure, temperature, humidity, and air changes on one screen. When coupled with external pressure sensor, product can provide pressure readings or flow down to 0.0001 in. H2O. Control outputs, based on measured inputs, utilize fully programmable control loops.

Dolomite Centre Ltd    Royston SG8 5TW  United Kingdom
Feb 18, 2011 Developed for Chip Interface H, Hotplate Adaptor allows control over internal temperatures of microfluidic chips without any disruptions to fluid flow. It is compatible with Linear Connector 4-way, 1.6 mm tubing and microfluidic chips with 22.5 x 15 mm footprint. Holding chip securely in position, product lets users pre- or post-heat fluids using integrated tube heater. It operates up to 100°C and comes with removable lid that closes and 22 mm dia glass viewing window.

Power Partners Inc    GA
Feb 16, 2011 Trigeneration packages enable simultaneous production of power, heat, and cooling from single heat source and are available in generating capacities from 200 kW to 2 MW. Units feature heat and power generation combined with ECO-MAX(TM) adsorption chillers which convert waste heat into chilled water for air conditioning or process use. Generating power using micro turbines, reciprocating engines, or fuel cells, they include skid-mounted cooling tower, pumps, piping, sensors, and chiller.