Company News

The Eraser Co., Inc.

123 Oliva Dr., Syracuse, NY, 13221, USA

  • 866-904-3378

Latest New Product News from
The Eraser Co., Inc.

machinery & machining tools, material handling & storage

Reelers and Dereelers come in manual and motorized variants.

March 16, 2016

Featuring adjustable friction clutch assembly that prevents overruns when dereeling material, manual DE600 accommodates reels up to 15 in. wide, 29 in. in diameter, and up to 200 lb. Motorized reeler/dereeler, DE600M, can reel wire or cable without operator fatigue or dereel wires or cables without any pulling. With 1/6 hp motor turning shaft at constant speed of 57 ½ rpm, unit handles reels of material weighing up to 75 lb Included handle also allows manual reeling/dereeling. Read More

electrical equipment & systems, machinery & machining tools, portable tools

Multi-Material Cutter offers programmable operation.

November 27, 2015

Featuring fully electric design, Model MMC71 is capable of cutting flat material up to 3.3 in. wide, tubing up to 3/16 in. OD, and wire up to 14 AWG stranded or 16 AWG solid. Programmable machine offers 10 fixed feed rates, 10 fixed cut rates, and storage for up to 99 batches and 10 kits, depending on available memory. Material guides are adjustable for each application. Typical applications include heat shrink tubing, silicone tubing, tapes, foils, and ribbon cable. Read More

electrical equipment & systems, machinery & machining tools, portable tools

Multi-Material Cutter cuts tubing, tape, wire, and cable.

September 21, 2015

Featuring fully electric design, Model MMC71 is capable of cutting wide range of materials, including flat material up to 3.3 in. wide, tubing up to 3/16 in. OD, and wire up to 14 AWG stranded or 16 AWG solid. Programmable unit offers 10 fixed feed rates, 10 fixed cut rates, and storage for up to 99 batches and 10 kits. Material guides are adjustable for each application, and additional guide kits are available to allow multiple pieces of same material to be cut simultaneously. Read More

machinery & machining tools

Automatic Wire Twister handles slippery and fine wire.

September 13, 2013

Capable of twisting 2 or more wires up to 20 ft in length, Model WT300 can achieve repeatable number of twists per inch on bundle of wire up to equivalent of two 16 AWG bare wires. Reversible motor enables benchtop unit to twist or untwist in either direction, while variable speed control can be adjusted to perform 0–26 turns per second. Supplied with one wire entry guide and set of steel clamp jaws, WT300 can grip magnet wire, very fine wire, and slippery wire. Read More

machinery & machining tools

Automatic Wire Twister has rugged, benchtop form factor.

August 2, 2013

Able to twist 2 or more wires up to 20 ft in length, WT200 automatic bench wire twister is made for high production. It achieves repeatable number of twists per inch on bundle of wire up to equivalent of two 16 AWG insulated wires. While reversible motor enables unit to twist or untwist in either direction, variable speed control allows adjustment for performing 0–26 turns/sec as internal clamping mechanism gently and securely holds wire. Read More

machinery & machining tools

Tube Cutter processes flexible tubing to tight specifications.

April 24, 2013

Featuring 10 feed rates, WC601D Rotary Blade Tube Cutter is capable of processing materials such as flexible polyurethane, flexible PVC, nylon reinforced hose, and rubber hose to programmed length and number of pieces. Adjustable belt feed and rotary cutter ensure there is no crushing of material, either along length or on cut ends. Batching feature allows all parameters for frequently run jobs to be pre-programmed, while kitting feature allows collection of batches to be run sequentially. Read More

machinery & machining tools

Flexible Tube Cutter handles range of materials, thicknesses.

March 20, 2013

Able to cut 1 1/8–¼ in. material, 120 V Model FTC1 Flexible Tube Cutter offers unlimited maximum cut length and minimum cut length of 2.00 in. Design facilitates usability while also promoting production flexibility. Cutter is capable of processing range of material types, including tygon, radiator hose, flexible PVC, polyurethane, silicone, nylon, PTFE, FEP, PFA, polyethylene, polypropylene, rubber, vinyl, and polystyrene. Read More

machinery & machining tools

Automatic Wire and Tubing Cutter offers 9 variable feed rates.

March 8, 2013

With 0.050–99.999 in. cut length range, Model WC302 accurately cuts wire, tubing, and sleeving to programmed length and number of pieces. Unit handles tubing up to 0.250 in. OD and wire up to 12 AWG/14 AWG (stranded/solid). Batching feature allows all variables for frequently run jobs to be pre-programmed, while kitting feature allows for multiple pieces of different lengths to be cut within batch. Up to 99 batches and 10 kits can be programmed. At cut lengths under 2 in., tolerance is ±0.01 in. Read More

electrical equipment & systems, machinery & machining tools, portable tools

Multi-Material Cutter offers max cutting force of 600 lb.

February 18, 2013

Able to produce round or flat material up to 3.94 in. wide and 5/8 in. thick, Model MMC200 can cut copper wire/cable, silver solder, power cords, cellophane, fiberglass sleeving, latex, fabrics, belting, flat/ribbon cable, strapping, hosing, and tubing. Microprocessor-controlled unit can be programmed to cut any length with 1% or better tolerance reliant on material construction. Programmable for up to 99 batches and 10 fixed feed rates, MMC200 is rated to cut up to 7,592 two inch pieces/hr. Read More

machinery & machining tools

Wire and Cable Reeler/Dereeler offers motorized operation.

December 8, 2009

Enabling operators to wind wire and cable without fatigue and quickly de-reel it with no pulling, Model DE600M features 1/6 hp motor that turns shaft at constant speed of 57½ rpm (47 rpm for 220 V units) and can handle reels of material weighing up to 75 lb. Adjustable cones and dog allow use of reels with arbor holes from ¾ to 2 1/8 in. OD, and included handle facilitates manual reeling and de-reeling if required. Read More

electrical equipment & systems

Coaxial Cable Stripper offers efficient, portable design.

October 15, 2009

Designed for portability and weighing only 2 lb, Model 824 Coaxial Cable Stripper can strip cables including RGU, semi-rigid, plenum, heliax, and more, as well as semi-rigid cable up to .141 in. OD. It features standard battery pack that provides about 200 strips/charge. Carrying case, charger, and adapter cord are included. Read More

electrical equipment & systems, machinery & machining tools, portable tools

Wire and Flexible Tubing Cutter offers automated operation.

February 17, 2009

Able to cut wire, tubing, sleeving, and more to programmed length and number of pieces, WC302 supports 9 variable feed rates for choosing correct rate for any given material to optimize production rate, repeatability, and cut length accuracy. As many as 99 batches may be programmed, each containing all variables for specific frequently run jobs. Also included, kitting feature allows for multiple pieces of different lengths to be cut within one batch; up to 10 kits can be programmed. Read More

electrical equipment & systems, machinery & machining tools, portable tools, textile industry products

Multi Material Cutter delivers 600 lb of cutting force.

November 20, 2008

Microprocessor-controlled MMC200 cuts round or flat material up to 3.94 in. wide and 5/8 in. thick and can be programmed to cut any length (in. or mm), with 1% or better tolerance. It is also programmable for up to 99 batches and 10 fixed feed rates. MMC200 is rated to cut up to 7,592, 2-in. pieces/hr through makerials such as copper wire and cable, silver solder, power cords, cellophane, fiberglass sleeving, latex, fabrics, belting, flat and ribbon cable, strapping, hosing and tubing. Read More

machinery & machining tools

Rotary Blade Tubing Cutter has 5 variable feed rates.

June 29, 2006

Model WC601D can cut materials such as flexible polyurethane, flexible PVC, nylon reinforced hose, and rubber hose from ½ to 1 1/8 in. OD. Belt feed eliminates crushing of tubes along their length as well as on cut ends, while programmable batching feature can retain 99 programs in memory. Rotary cutting head consistently produces clean, square cuts that conform to tight specifications as required for medical applications. Read More

machinery & machining tools

Reelers and Dereelers produce neat wire and cable coils.

January 13, 2006

Available with coil weight capacities from 55-150 lb, models CW10, CW20, and CW30 incorporate adjustable friction clutch to prevent overruns in dereeling operations. Products have variable coil dimensions (IDs) from 5-27 in. as well as capacity lengths from 1,000 ft of 1/8 in. dia wires up to 300 ft of ¾ in. dia wires. Uses include dereeling, measuring, cutting, and reeling operations by production kitters, jobbers, and electrical contractors. Read More

machinery & machining tools

Wire Twisters handle wires with or without connectors.

November 16, 2005

Activated with electric foot pedal, WT Series can twist wires up to ¼ in. OD or two 16 AWG stranded wires without damaging conductors. Units incorporate speed control and counter for consistent number of clockwise or counter-clockwise twists. Custom twisting heads are available for unique applications. Read More

electrical equipment & systems, portable tools

Magnet Wire Stripper features in-line operation.

August 10, 2005

Model IK10 removes film type insulation from round magnet wires used in manufacture of coils, bobbins, chokes, resistors, and spring winders. Able to handle round wires from 11-28 AWG, product strips max of 4 in. long windows. Fully programmable unit, used in conjunction with coil winding and spring winding machines, pre-strips or window strips wires as coils are wound. It incorporates 115 V, 60 Hz reversible motor and requires 90 psi air supply. Read More

electrical equipment & systems, machinery & machining tools, portable tools

Wire Stripper has bi-directional rotary blade design.

July 19, 2005

Model K8A uses 4 rotating carbide blades, operating in clockwise or counterclockwise rotation, that open and close concentrically around material to be stripped. Blade closing is controlled by electrical foot switch that activates air cylinder. Featuring adjustable blade depth and strip length, unit can end-strip or window-strip film insulated magnet wire from 11-28 AWG and end-strip extruded wires from 8-38 AWG. Read More

electrical equipment & systems, portable tools

Wire Stripper removes insulation from fine wires.

June 24, 2005

Model RT2S strips film-type insulation from wires 28-48 AWG. Fiberglass stripping wheels remove insulation without contaminating or flattening conductors. Design allows close-to-coil body wire stripping. Multiple wires may be processed at one time, and strip length stop can be adjusted to produce consistent strip lengths. Read More

machinery & machining tools

Rigid Tube Cutter processes material from 3/32-1/2 in.

March 8, 2005

Offering unlimited cut length, manual-feed Rigid Tubing Cutter Model RTC1 processes material from 3/32 to 1/2 in. in diameter. It can accommodate copper, aluminum, and mild steel materials. Read More

Other Company News from
The Eraser Co., Inc.

December 21, 2007

WT Series Wire Twisters