POWER-IO
Naperville, IL 60563
Solid State Contactor accepts 4-20 mA control signal.
Able to handle resistive loads up to 25 or 35 A/phase, 3-phase DMA3-6V75T converts analog input into high-speed time proportional output that is compatible with most PLCs or SCADA systems. Switched outputs are zero-crossing solid state back-to-back thyristors to minimize electronic noise. Contactor is suited for applications such as resistive electric heaters, food processing heaters, and heater...
Read More »
Solid State Relays suit 3-phase applications.
Pre-installed on heatsink, Series D Relays electrically switch 2 or 3 poles up to 660 V. Input requirement of 8 mA is directly compatible with most PLCs, PCs, and PID temperature controllers. Zero-crossing switching results in clean on/off control, reducing electrical noise to adjacent products. Units incorporate DCB direct copper bonding technology and Maximum Surge Survival technology, which...
Read More »Solid State Relays are suited for switching DC loads.
Designed for switching DC loads, servos, or robotics, relays are tested at 15,000 on/off cycles per sec for fast response to command signals. With control input requirement of 4-32 Vdc and 6-10 mA, products are compatible with standard TTL logic systems, PLC, PCs, or customized control systems. Immune to mechanical contact bounce, relays have green LED for input status indication and are...
Read More »
Modules convert fieldbus I/O into power I/O.
Power-I/O Modules convert network I/O, fieldbus I/O, DeviceNet(TM), Profibus(TM), or home automation I/O nodes into power switching nodes rated for 0.1-100 A. Din rail modules, rated 25-100 A, can be installed edge-to-edge on same din rail, without derating, for high-density installations starting at 25 A of switching capability every 30 mm. Some models include built-in, replaceable fuse. All...
Read More »
Contactors suit constant starting and stopping applications.
Solid State Contactors can turn on industrial motors up to 2 hp, single phase, or up to 5 hp, 3-phase. Maximum Surge Survival(TM) technology and conservative internal SCR design ensure long life when exposed to voltage and amperage surges of motor starting. Clear, finger-safe cover permits additional motor starter MOV to be placed directly across solid state contactor's output, for fourth layer...
Read More »Power Controllers work with PLCs, PCs, and SCADA systems.
Solid-state contactors accept 4-20 mA signal and convert it into time proportional output. With high-speed cycling capability of twice per second and set-point resolution of 0.5 sinewave, products reduce thermal stress and include finger-safe caged terminals, integral heat sink, and universal mounting bracket for DIN-rail or bolt-on installations. Products are available in single-phase models of...
Read More »Solid-State Contactors accept potentiometer input.
Power switching products accept 0-5 k potentiometer signal and convert it into time proportional output. With cycling capability of twice per second and set-point resolution of 0.5 sinewave, contactors reduce thermal stress and include finger-safe caged terminals, integral heat sink, and universal mounting bracket for DIN-rail or bolt-on installations. Products are available in single-phase...
Read More »
Solid State Contactor accepts 4-20 mA control signal.
Able to handle resistive loads up to 25 or 35 A/phase, 3-phase DMA3-6V75T converts analog input into high-speed time proportional output that is compatible with most PLCs or SCADA systems. Switched outputs are zero-crossing solid state back-to-back thyristors to minimize electronic noise. Contactor is suited for applications such as resistive electric heaters, food processing heaters, and heater...
Read More »
Solid State Relays suit 3-phase applications.
Pre-installed on heatsink, Series D Relays electrically switch 2 or 3 poles up to 660 V. Input requirement of 8 mA is directly compatible with most PLCs, PCs, and PID temperature controllers. Zero-crossing switching results in clean on/off control, reducing electrical noise to adjacent products. Units incorporate DCB direct copper bonding technology and Maximum Surge Survival technology, which...
Read More »Solid State Relays are suited for switching DC loads.
Designed for switching DC loads, servos, or robotics, relays are tested at 15,000 on/off cycles per sec for fast response to command signals. With control input requirement of 4-32 Vdc and 6-10 mA, products are compatible with standard TTL logic systems, PLC, PCs, or customized control systems. Immune to mechanical contact bounce, relays have green LED for input status indication and are...
Read More »
Modules convert fieldbus I/O into power I/O.
Power-I/O Modules convert network I/O, fieldbus I/O, DeviceNet(TM), Profibus(TM), or home automation I/O nodes into power switching nodes rated for 0.1-100 A. Din rail modules, rated 25-100 A, can be installed edge-to-edge on same din rail, without derating, for high-density installations starting at 25 A of switching capability every 30 mm. Some models include built-in, replaceable fuse. All...
Read More »
Contactors suit constant starting and stopping applications.
Solid State Contactors can turn on industrial motors up to 2 hp, single phase, or up to 5 hp, 3-phase. Maximum Surge Survival(TM) technology and conservative internal SCR design ensure long life when exposed to voltage and amperage surges of motor starting. Clear, finger-safe cover permits additional motor starter MOV to be placed directly across solid state contactor's output, for fourth layer...
Read More »Power Controllers work with PLCs, PCs, and SCADA systems.
Solid-state contactors accept 4-20 mA signal and convert it into time proportional output. With high-speed cycling capability of twice per second and set-point resolution of 0.5 sinewave, products reduce thermal stress and include finger-safe caged terminals, integral heat sink, and universal mounting bracket for DIN-rail or bolt-on installations. Products are available in single-phase models of...
Read More »Solid-State Contactors accept potentiometer input.
Power switching products accept 0-5 k potentiometer signal and convert it into time proportional output. With cycling capability of twice per second and set-point resolution of 0.5 sinewave, contactors reduce thermal stress and include finger-safe caged terminals, integral heat sink, and universal mounting bracket for DIN-rail or bolt-on installations. Products are available in single-phase...
Read More »